From: Ivo van Doorn <ivdoorn@gmail.com>
Date: Thu, 10 Jan 2008 21:02:44 +0000 (+0100)
Subject: rt2x00: Data and desc pointer initialization
X-Git-Tag: v2.6.25-rc1~1162^2~137
X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=40561b8426c27f187e2ae496ed603e7c4e3ab818;p=linux-2.6-omap-h63xx.git

rt2x00: Data and desc pointer initialization

rt2500usb and rt73usb data and desc pointer initialization
was incorrect because it was using uninitialized variables
to determine the length.

In addition rt2500usb used skb_pull and removed the ieee80211
from each received frame instead of using skb_trim to remove
the device descriptor from the frame.

Finally this also fixes the descriptor override when 4 byte
aligning occured. We still need a completely valid descriptor
when using the TX/RX dumping capabilities in debugfs.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---

diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 1933113d7ba..86ded4066f5 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1139,16 +1139,13 @@ static void rt2500usb_fill_rxdone(struct data_entry *entry,
 	desc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
 	desc->my_bss = !!rt2x00_get_field32(word0, RXD_W0_MY_BSS);
 
-	/*
-	 * Trim the skb to clear the descriptor area.
-	 */
-	skb_pull(entry->skb, entry->ring->desc_size);
-
 	/*
 	 * Set descriptor and data pointer.
 	 */
-	skbdesc->desc = entry->skb->data + skbdesc->data_len;
+	skbdesc->desc = entry->skb->data + desc->size;
+	skbdesc->desc_len = entry->ring->desc_size;
 	skbdesc->data = entry->skb->data;
+	skbdesc->data_len = desc->size;
 }
 
 /*
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c
index d7d3a271b1b..a52939aa38a 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.c
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.c
@@ -257,6 +257,13 @@ static void rt2x00usb_interrupt_rxdone(struct urb *urb)
 	if (urb->actual_length < entry->ring->desc_size || urb->status)
 		goto skip_entry;
 
+	/*
+	 * Fill in skb descriptor
+	 */
+	skbdesc = get_skb_desc(entry->skb);
+	skbdesc->ring = ring;
+	skbdesc->entry = entry;
+
 	memset(&desc, 0, sizeof(desc));
 	rt2x00dev->ops->lib->fill_rxdone(entry, &desc);
 
@@ -283,9 +290,6 @@ static void rt2x00usb_interrupt_rxdone(struct urb *urb)
 	/*
 	 * The data behind the ieee80211 header must be
 	 * aligned on a 4 byte boundary.
-	 * After that trim the entire buffer down to only
-	 * contain the valid frame data excluding the device
-	 * descriptor.
 	 */
 	hdr = (struct ieee80211_hdr *)entry->skb->data;
 	header_size =
@@ -295,16 +299,17 @@ static void rt2x00usb_interrupt_rxdone(struct urb *urb)
 		skb_push(entry->skb, 2);
 		memmove(entry->skb->data, entry->skb->data + 2, skb->len - 2);
 	}
-	skb_trim(entry->skb, desc.size);
 
 	/*
-	 * Fill in skb descriptor
+	 * Trim the entire buffer down to only contain the valid frame data
+	 * excluding the device descriptor. The position of the descriptor
+	 * varies. This means that we should check where the descriptor is
+	 * and decide if we need to pull the data pointer to exclude the
+	 * device descriptor.
 	 */
-	skbdesc = get_skb_desc(entry->skb);
-	skbdesc->desc_len = entry->ring->desc_size;
-	skbdesc->data_len = entry->skb->len;
-	skbdesc->ring = ring;
-	skbdesc->entry = entry;
+	if (skbdesc->data > skbdesc->desc)
+		skb_pull(entry->skb, skbdesc->desc_len);
+	skb_trim(entry->skb, desc.size);
 
 	/*
 	 * Send the frame to rt2x00lib for further processing.
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index f9518764aeb..4d576ab3e7f 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -1397,16 +1397,13 @@ static void rt73usb_fill_rxdone(struct data_entry *entry,
 	desc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
 	desc->my_bss = !!rt2x00_get_field32(word0, RXD_W0_MY_BSS);
 
-	/*
-	 * Pull the skb to clear the descriptor area.
-	 */
-	skb_pull(entry->skb, entry->ring->desc_size);
-
 	/*
 	 * Set descriptor and data pointer.
 	 */
-	skbdesc->desc = entry->skb->data - skbdesc->desc_len;
-	skbdesc->data = entry->skb->data;
+	skbdesc->desc = entry->skb->data;
+	skbdesc->desc_len = entry->ring->desc_size;
+	skbdesc->data = entry->skb->data + entry->ring->desc_size;
+	skbdesc->data_len = desc->size;
 }
 
 /*