From: Jiri Slaby Date: Tue, 15 Jul 2008 15:44:21 +0000 (+0200) Subject: Ath5k: suspend/resume fixes X-Git-Tag: v2.6.27-rc2~119^2~6^2~35 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=3e4242b99ce46fed82aa7f40ad5a1817a2b3bd45;p=linux-2.6-omap-h63xx.git Ath5k: suspend/resume fixes - free and re-request irq since it might have changed during suspend - disable and enable msi - don't set D0 state of the device, it's already done by the PCI layer - do restore_state before enable_device, it's safer - check ath5k_init return value Signed-off-by: Jiri Slaby Acked-by: Nick Kossifidis Cc: Luis R. Rodriguez Cc: Jesse Barnes Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index 3aa22dc7165..7273e9f5c6d 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -592,6 +592,9 @@ ath5k_pci_suspend(struct pci_dev *pdev, pm_message_t state) ath5k_led_off(sc); ath5k_stop_hw(sc); + + free_irq(pdev->irq, sc); + pci_disable_msi(pdev); pci_save_state(pdev); pci_disable_device(pdev); pci_set_power_state(pdev, PCI_D3hot); @@ -607,15 +610,12 @@ ath5k_pci_resume(struct pci_dev *pdev) struct ath5k_hw *ah = sc->ah; int i, err; - err = pci_set_power_state(pdev, PCI_D0); - if (err) - return err; + pci_restore_state(pdev); err = pci_enable_device(pdev); if (err) return err; - pci_restore_state(pdev); /* * Suspend/Resume resets the PCI configuration space, so we have to * re-disable the RETRY_TIMEOUT register (0x41) to keep @@ -623,7 +623,17 @@ ath5k_pci_resume(struct pci_dev *pdev) */ pci_write_config_byte(pdev, 0x41, 0); - ath5k_init(sc); + pci_enable_msi(pdev); + + err = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc); + if (err) { + ATH5K_ERR(sc, "request_irq failed\n"); + goto err_msi; + } + + err = ath5k_init(sc); + if (err) + goto err_irq; ath5k_led_enable(sc); /* @@ -637,6 +647,12 @@ ath5k_pci_resume(struct pci_dev *pdev) ath5k_hw_reset_key(ah, i); return 0; +err_irq: + free_irq(pdev->irq, sc); +err_msi: + pci_disable_msi(pdev); + pci_disable_device(pdev); + return err; } #endif /* CONFIG_PM */