From: Ben Dooks Date: Tue, 17 Apr 2007 05:53:22 +0000 (-0700) Subject: spi: fix use of set_cs in spi_s3c24xx driver X-Git-Tag: v2.6.21~72 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=3d2c5b415ccd6c322e18adaed3a5b21f7ec555ef;p=linux-2.6-omap-h63xx.git spi: fix use of set_cs in spi_s3c24xx driver It turns out that the last patch to change set_cs to be kept in the controller's structure instead of the platform data was an incomplete change, and did not change the references to platfrom data in the setup xfer code. (This can prevent an oops.) Reported-by: Signed-off-by: Ben Dooks Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c index 220abce63e4..b10211c420e 100644 --- a/drivers/spi/spi_s3c24xx.c +++ b/drivers/spi/spi_s3c24xx.c @@ -77,7 +77,7 @@ static void s3c24xx_spi_chipsel(struct spi_device *spi, int value) switch (value) { case BITBANG_CS_INACTIVE: - hw->pdata->set_cs(hw->pdata, spi->chip_select, cspol^1); + hw->set_cs(hw->pdata, spi->chip_select, cspol^1); break; case BITBANG_CS_ACTIVE: @@ -98,7 +98,7 @@ static void s3c24xx_spi_chipsel(struct spi_device *spi, int value) /* write new configration */ writeb(spcon, hw->regs + S3C2410_SPCON); - hw->pdata->set_cs(hw->pdata, spi->chip_select, cspol); + hw->set_cs(hw->pdata, spi->chip_select, cspol); break; }