From: Florian Fainelli Date: Sun, 13 Jul 2008 12:28:27 +0000 (+0200) Subject: r6040: fix null pointer access and tx timeouts X-Git-Tag: v2.6.27-rc1~860^2~3^2~10 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=3d25434816356e8d1e3167c5f7a56d3d81aeb239;p=linux-2.6-omap-h63xx.git r6040: fix null pointer access and tx timeouts This patch fixes a null pointer access in r6040_rx due to lp->dev not being initialized. Fix the TX timeouts, TX irq was not re-enabled on RX irq Signed-Off-By: Joerg Albert Signed-off-by: Florian Fainelli Signed-off-by: Jeff Garzik --- diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c index 4e67884bdc9..d277deb872e 100644 --- a/drivers/net/r6040.c +++ b/drivers/net/r6040.c @@ -91,6 +91,14 @@ #define MISR 0x3C /* Status register */ #define MIER 0x40 /* INT enable register */ #define MSK_INT 0x0000 /* Mask off interrupts */ +#define RX_FINISH 0x0001 /* RX finished */ +#define RX_NO_DESC 0x0002 /* No RX descriptor available */ +#define RX_FIFO_FULL 0x0004 /* RX FIFO full */ +#define RX_EARLY 0x0008 /* RX early */ +#define TX_FINISH 0x0010 /* TX finished */ +#define TX_EARLY 0x0080 /* TX early */ +#define EVENT_OVRFL 0x0100 /* Event counter overflow */ +#define LINK_CHANGED 0x0200 /* PHY link changed */ #define ME_CISR 0x44 /* Event counter INT status */ #define ME_CIER 0x48 /* Event counter INT enable */ #define MR_CNT 0x50 /* Successfully received packet counter */ @@ -139,10 +147,10 @@ MODULE_AUTHOR("Sten Wang ," MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("RDC R6040 NAPI PCI FastEthernet driver"); -#define RX_INT 0x0001 -#define TX_INT 0x0010 -#define RX_NO_DESC_INT 0x0002 -#define INT_MASK (RX_INT | TX_INT) +/* RX and TX interrupts that we handle */ +#define RX_INT (RX_FINISH) +#define TX_INT (TX_FINISH) +#define INT_MASK (RX_INT | TX_INT) struct r6040_descriptor { u16 status, len; /* 0-3 */ @@ -502,8 +510,6 @@ static int r6040_rx(struct net_device *dev, int limit) struct r6040_descriptor *descptr = priv->rx_remove_ptr; struct sk_buff *skb_ptr; - /* Disable RX interrupt */ - iowrite16(ioread16(ioaddr + MIER) & (~RX_INT), ioaddr + MIER); descptr = priv->rx_remove_ptr; /* Check for errors */ @@ -639,8 +645,9 @@ static irqreturn_t r6040_interrupt(int irq, void *dev_id) /* RX interrupt request */ if (status & 0x01) { + /* Mask off RX interrupt */ + iowrite16(ioread16(ioaddr + MIER) & ~RX_INT, ioaddr + MIER); netif_rx_schedule(dev, &lp->napi); - iowrite16(TX_INT, ioaddr + MIER); } /* TX interrupt request */ @@ -687,7 +694,11 @@ static void r6040_up(struct net_device *dev) else lp->phy_mode = (PHY_MODE & 0x0100) ? 0x8000:0x0; } - /* MAC Bus Control Register */ + /* MAC Bus Control Register : + * - wait 1 host clock SDRAM bus request + * - RX FIFO : 32 bytes + * - TX FIFO : 64 bytes + * - FIFO transfer lenght : 16 bytes */ iowrite16(MBCR_DEFAULT, ioaddr + MBCR); /* MAC TX/RX Enable */ @@ -1018,6 +1029,7 @@ static int __devinit r6040_init_one(struct pci_dev *pdev, SET_NETDEV_DEV(dev, &pdev->dev); lp = netdev_priv(dev); lp->pdev = pdev; + lp->dev = dev; if (pci_request_regions(pdev, DRV_NAME)) { printk(KERN_ERR DRV_NAME ": Failed to request PCI regions\n");