From: Scott Wood <scottwood@freescale.com>
Date: Wed, 16 May 2007 20:06:59 +0000 (-0500)
Subject: gianfar: Add I/O barriers when touching buffer descriptor ownership.
X-Git-Tag: v2.6.22-rc2~19
X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=3b6330ce2a3e1f152f79a6203f73d23356e243a7;p=linux-2.6-omap-h63xx.git

gianfar: Add I/O barriers when touching buffer descriptor ownership.

The hardware must not see that is given ownership of a buffer until it is
completely written, and when the driver receives ownership of a buffer,
it must ensure that any other reads to the buffer reflect its final
state.  Thus, I/O barriers are added where required.

Without this patch, I have observed GCC reordering the setting of
bdp->length and bdp->status in gfar_new_skb.  Hardware reordering
was also theoretically possible.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---

diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index b666a0cc064..f5b3cba23fc 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -1025,6 +1025,15 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	dev->trans_start = jiffies;
 
+	/* The powerpc-specific eieio() is used, as wmb() has too strong
+	 * semantics (it requires synchronization between cacheable and
+	 * uncacheable mappings, which eieio doesn't provide and which we
+	 * don't need), thus requiring a more expensive sync instruction.  At
+	 * some point, the set of architecture-independent barrier functions
+	 * should be expanded to include weaker barriers.
+	 */
+
+	eieio();
 	txbdp->status = status;
 
 	/* If this was the last BD in the ring, the next one */
@@ -1301,6 +1310,7 @@ struct sk_buff * gfar_new_skb(struct net_device *dev, struct rxbd8 *bdp)
 	bdp->length = 0;
 
 	/* Mark the buffer empty */
+	eieio();
 	bdp->status |= (RXBD_EMPTY | RXBD_INTERRUPT);
 
 	return skb;
@@ -1484,6 +1494,7 @@ int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit)
 	bdp = priv->cur_rx;
 
 	while (!((bdp->status & RXBD_EMPTY) || (--rx_work_limit < 0))) {
+		rmb();
 		skb = priv->rx_skbuff[priv->skb_currx];
 
 		if (!(bdp->status &