From: Samuel Ortiz Date: Fri, 20 Jun 2008 09:09:51 +0000 (+0200) Subject: mfd: New asic3 gpio configuration code X-Git-Tag: v2.6.27-rc1~965^2~9 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=3b26bf17226f66bfd6cd4e36ac81f83fe994043a;p=linux-2.6-omap-h63xx.git mfd: New asic3 gpio configuration code The ASIC3 GPIO configuration code is a bit obscure and hardly readable. This patch changes it so that it is now more readable and understandable, by being more explicit. Signed-off-by: Samuel Ortiz Signed-off-by: Andrew Morton --- diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c index dfee0a2ba16..36b46ded1bf 100644 --- a/drivers/mfd/asic3.c +++ b/drivers/mfd/asic3.c @@ -465,69 +465,54 @@ static void asic3_gpio_set(struct gpio_chip *chip, return; } -static inline u32 asic3_get_gpio(struct asic3 *asic, unsigned int base, - unsigned int function) +static int asic3_gpio_probe(struct platform_device *pdev, + u16 *gpio_config, int num) { - return asic3_read_register(asic, base + function); -} - -static void asic3_set_gpio(struct asic3 *asic, unsigned int base, - unsigned int function, u32 bits, u32 val) -{ - unsigned long flags; - - spin_lock_irqsave(&asic->lock, flags); - val |= (asic3_read_register(asic, base + function) & ~bits); - - asic3_write_register(asic, base + function, val); - spin_unlock_irqrestore(&asic->lock, flags); -} - -#define asic3_set_gpio_a(asic, fn, bits, val) \ - asic3_set_gpio(asic, ASIC3_GPIO_A_Base, ASIC3_GPIO_##fn, bits, val) -#define asic3_set_gpio_b(asic, fn, bits, val) \ - asic3_set_gpio(asic, ASIC3_GPIO_B_Base, ASIC3_GPIO_##fn, bits, val) -#define asic3_set_gpio_c(asic, fn, bits, val) \ - asic3_set_gpio(asic, ASIC3_GPIO_C_Base, ASIC3_GPIO_##fn, bits, val) -#define asic3_set_gpio_d(asic, fn, bits, val) \ - asic3_set_gpio(asic, ASIC3_GPIO_D_Base, ASIC3_GPIO_##fn, bits, val) - -#define asic3_set_gpio_banks(asic, fn, bits, pdata, field) \ - do { \ - asic3_set_gpio_a((asic), fn, (bits), (pdata)->gpio_a.field); \ - asic3_set_gpio_b((asic), fn, (bits), (pdata)->gpio_b.field); \ - asic3_set_gpio_c((asic), fn, (bits), (pdata)->gpio_c.field); \ - asic3_set_gpio_d((asic), fn, (bits), (pdata)->gpio_d.field); \ - } while (0) - - -static int asic3_gpio_probe(struct platform_device *pdev) -{ - struct asic3_platform_data *pdata = pdev->dev.platform_data; struct asic3 *asic = platform_get_drvdata(pdev); + u16 alt_reg[ASIC3_NUM_GPIO_BANKS]; + u16 out_reg[ASIC3_NUM_GPIO_BANKS]; + u16 dir_reg[ASIC3_NUM_GPIO_BANKS]; + int i; + memset(alt_reg, 0, ASIC3_NUM_GPIO_BANKS); + memset(out_reg, 0, ASIC3_NUM_GPIO_BANKS); + memset(dir_reg, 0, ASIC3_NUM_GPIO_BANKS); + + /* Enable all GPIOs */ asic3_write_register(asic, ASIC3_GPIO_OFFSET(A, Mask), 0xffff); asic3_write_register(asic, ASIC3_GPIO_OFFSET(B, Mask), 0xffff); asic3_write_register(asic, ASIC3_GPIO_OFFSET(C, Mask), 0xffff); asic3_write_register(asic, ASIC3_GPIO_OFFSET(D, Mask), 0xffff); - asic3_set_gpio_a(asic, SleepMask, 0xffff, 0xffff); - asic3_set_gpio_b(asic, SleepMask, 0xffff, 0xffff); - asic3_set_gpio_c(asic, SleepMask, 0xffff, 0xffff); - asic3_set_gpio_d(asic, SleepMask, 0xffff, 0xffff); - - if (pdata) { - asic3_set_gpio_banks(asic, Out, 0xffff, pdata, init); - asic3_set_gpio_banks(asic, Direction, 0xffff, pdata, dir); - asic3_set_gpio_banks(asic, SleepMask, 0xffff, pdata, - sleep_mask); - asic3_set_gpio_banks(asic, SleepOut, 0xffff, pdata, sleep_out); - asic3_set_gpio_banks(asic, BattFaultOut, 0xffff, pdata, - batt_fault_out); - asic3_set_gpio_banks(asic, SleepConf, 0xffff, pdata, - sleep_conf); - asic3_set_gpio_banks(asic, AltFunction, 0xffff, pdata, - alt_function); + for (i = 0; i < num; i++) { + u8 alt, pin, dir, init, bank_num, bit_num; + u16 config = gpio_config[i]; + + pin = ASIC3_CONFIG_GPIO_PIN(config); + alt = ASIC3_CONFIG_GPIO_ALT(config); + dir = ASIC3_CONFIG_GPIO_DIR(config); + init = ASIC3_CONFIG_GPIO_INIT(config); + + bank_num = ASIC3_GPIO_TO_BANK(pin); + bit_num = ASIC3_GPIO_TO_BIT(pin); + + alt_reg[bank_num] |= (alt << bit_num); + out_reg[bank_num] |= (init << bit_num); + dir_reg[bank_num] |= (dir << bit_num); + } + + for (i = 0; i < ASIC3_NUM_GPIO_BANKS; i++) { + asic3_write_register(asic, + ASIC3_BANK_TO_BASE(i) + + ASIC3_GPIO_Direction, + dir_reg[i]); + asic3_write_register(asic, + ASIC3_BANK_TO_BASE(i) + ASIC3_GPIO_Out, + out_reg[i]); + asic3_write_register(asic, + ASIC3_BANK_TO_BASE(i) + + ASIC3_GPIO_AltFunction, + alt_reg[i]); } return gpiochip_add(&asic->gpio); @@ -598,7 +583,9 @@ static int asic3_probe(struct platform_device *pdev) asic->gpio.direction_input = asic3_gpio_direction_input; asic->gpio.direction_output = asic3_gpio_direction_output; - ret = asic3_gpio_probe(pdev); + ret = asic3_gpio_probe(pdev, + pdata->gpio_config, + pdata->gpio_config_num); if (ret < 0) { printk(KERN_ERR "GPIO probe failed\n"); goto out_irq; diff --git a/include/linux/mfd/asic3.h b/include/linux/mfd/asic3.h index b1c365800ab..7e47cfb0c44 100644 --- a/include/linux/mfd/asic3.h +++ b/include/linux/mfd/asic3.h @@ -8,7 +8,7 @@ * published by the Free Software Foundation. * * Copyright 2001 Compaq Computer Corporation. - * Copyright 2007 OpendHand. + * Copyright 2007-2008 OpenedHand Ltd. */ #ifndef __ASIC3_H__ @@ -17,15 +17,8 @@ #include struct asic3_platform_data { - struct { - u32 dir; - u32 init; - u32 sleep_mask; - u32 sleep_out; - u32 batt_fault_out; - u32 sleep_conf; - u32 alt_function; - } gpio_a, gpio_b, gpio_c, gpio_d; + u16 *gpio_config; + unsigned int gpio_config_num; unsigned int bus_shift; @@ -86,6 +79,27 @@ struct asic3_platform_data { */ #define ASIC3_GPIO_Status 0x30 /* R Pin status */ +/* + * ASIC3 GPIO config + * + * Bits 0..6 gpio number + * Bits 7..13 Alternate function + * Bit 14 Direction + * Bit 15 Initial value + * + */ +#define ASIC3_CONFIG_GPIO_PIN(config) ((config) & 0x7f) +#define ASIC3_CONFIG_GPIO_ALT(config) (((config) & (0x7f << 7)) >> 7) +#define ASIC3_CONFIG_GPIO_DIR(config) ((config & (1 << 14)) >> 14) +#define ASIC3_CONFIG_GPIO_INIT(config) ((config & (1 << 15)) >> 15) +#define ASIC3_CONFIG_GPIO(gpio, alt, dir, init) (((gpio) & 0x7f) \ + | (((alt) & 0x7f) << 7) | (((dir) & 0x1) << 14) \ + | (((init) & 0x1) << 15)) +#define ASIC3_CONFIG_GPIO_DEFAULT(gpio, dir, init) \ + ASIC3_CONFIG_GPIO((gpio), 0, (dir), (init)) +#define ASIC3_CONFIG_GPIO_DEFAULT_OUT(gpio, init) \ + ASIC3_CONFIG_GPIO((gpio), 0, 1, (init)) + #define ASIC3_SPI_Base 0x0400 #define ASIC3_SPI_Control 0x0000 #define ASIC3_SPI_TxData 0x0004