From: Tejun Heo Date: Tue, 23 Oct 2007 06:27:31 +0000 (+0900) Subject: jmicron: update quirk for JMB361/3/5/6 X-Git-Tag: v2.6.24-rc1~16^2 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=3a9e3a51dd47bd9e2fd6bcf3c893eb5729c6f1ee;p=linux-2.6-omap-h63xx.git jmicron: update quirk for JMB361/3/5/6 Set bits 0, 4, 5 and 7 of PCI configuration register 0x40 in the quirk. This has the following effects and is recommended by the vendor. * Force enable of IDE channels (used to be left alone as BIOS configured) * Change initial phase behavior of PIO cycle such that the host pulls down the bus instead of tristating it. Vendor recommends this setting. The above settings are better for the current generation of controllers and needed for the upcoming next generation. Tested on JMB363. Signed-off-by: Tejun Heo Cc: Ethan Hsiao Signed-off-by: Jeff Garzik --- diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 59d4da2734c..d0bb5b9d212 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1230,7 +1230,7 @@ static void quirk_jmicron_ata(struct pci_dev *pdev) case PCI_DEVICE_ID_JMICRON_JMB363: /* Enable dual function mode, AHCI on fn 0, IDE fn1 */ /* Set the class codes correctly and then direct IDE 0 */ - conf1 |= 0x00C2A102; /* Set 1, 8, 13, 15, 17, 22, 23 */ + conf1 |= 0x00C2A1B3; /* Set 0, 1, 4, 5, 7, 8, 13, 15, 17, 22, 23 */ break; case PCI_DEVICE_ID_JMICRON_JMB368: