From: Niels de Vos Date: Fri, 2 Jan 2009 13:46:58 +0000 (+0000) Subject: serial: set correct baud_base for Oxford Semiconductor Ltd EXSYS EX-41092 Dual 16950... X-Git-Tag: v2.6.29-rc1~545^2~30 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=39aced68d664291db3324d0fcf0985ab5626aac2;p=linux-2.6-omap-h63xx.git serial: set correct baud_base for Oxford Semiconductor Ltd EXSYS EX-41092 Dual 16950 Serial adapter The PCI-card identified as "Oxford Semiconductor Ltd EXSYS EX-41092 Dual 16950 Serial adapter" is only usable with other devices (i.e. not the same card) after doing a "setserial /dev/ttyS baud_base 115200". This baud_base should be default for this card. Signed-off-by: Niels de Vos Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index 0b794138f68..2a2e1c717e8 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -2387,6 +2387,9 @@ static struct pci_device_id serial_pci_tbl[] = { * www.ussg.iu.edu/hypermail/linux/kernel/0303.1/0516.html). * For now just used the hex ID 0x950a. */ + { PCI_VENDOR_ID_OXSEMI, 0x950a, + PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_DUAL_SERIAL, 0, 0, + pbn_b0_2_115200 }, { PCI_VENDOR_ID_OXSEMI, 0x950a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b0_2_1130000 }, diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index b6e69445428..fa83dfefc5e 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1766,6 +1766,7 @@ #define PCI_DEVICE_ID_SIIG_8S_20x_650 0x2081 #define PCI_DEVICE_ID_SIIG_8S_20x_850 0x2082 #define PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL 0x2050 +#define PCI_SUBDEVICE_ID_SIIG_DUAL_SERIAL 0x2530 #define PCI_VENDOR_ID_RADISYS 0x1331