From: Venki Pallipadi Date: Wed, 22 Oct 2008 23:51:03 +0000 (-0700) Subject: i7300_idle: Cleanup based review comments X-Git-Tag: v2.6.28-rc3~109^2^2~1 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=33093e186c8f80b443fafb1d347a140bdd2b86c6;p=linux-2.6-omap-h63xx.git i7300_idle: Cleanup based review comments Cleanup of i7300 idle driver based on review comments from Randy Dunlap, Andi Kleen and Len Brown. Signed-off-by: Venkatesh Pallipadi Signed-off-by: Len Brown --- diff --git a/drivers/idle/Kconfig b/drivers/idle/Kconfig index f5b26dd579e..108264de0ac 100644 --- a/drivers/idle/Kconfig +++ b/drivers/idle/Kconfig @@ -5,12 +5,13 @@ config I7300_IDLE_IOAT_CHANNEL bool config I7300_IDLE - tristate "Intel chipset idle power saving driver" + tristate "Intel chipset idle memory power saving driver" select I7300_IDLE_IOAT_CHANNEL - depends on X86_64 + depends on X86_64 && EXPERIMENTAL help - Enable idle power savings with certain Intel server chipsets. - The chipset must have I/O AT support, such as the Intel 7300. - The power savings depends on the type and quantity of DRAM devices. + Enable memory power savings when idle with certain Intel server + chipsets. The chipset must have I/O AT support, such as the + Intel 7300. The power savings depends on the type and quantity of + DRAM devices. endmenu diff --git a/drivers/idle/i7300_idle.c b/drivers/idle/i7300_idle.c index 79d47f284cd..fb176f6ef9f 100644 --- a/drivers/idle/i7300_idle.c +++ b/drivers/idle/i7300_idle.c @@ -35,6 +35,8 @@ #define I7300_IDLE_DRIVER_VERSION "1.55" #define I7300_PRINT "i7300_idle:" +#define MAX_STOP_RETRIES 10 + static int debug; module_param_named(debug, debug, uint, 0644); MODULE_PARM_DESC(debug, "Enable debug printks in this driver"); @@ -47,12 +49,12 @@ MODULE_PARM_DESC(debug, "Enable debug printks in this driver"); * 0 = No throttling * 1 = Throttle when > 4 activations per eval window (Maximum throttling) * 2 = Throttle when > 8 activations - * 168 = Throttle when > 168 activations (Minimum throttling) + * 168 = Throttle when > 672 activations (Minimum throttling) */ -#define MAX_THRTLWLIMIT 168 -static uint i7300_idle_thrtlowlm = 1; -module_param_named(thrtlwlimit, i7300_idle_thrtlowlm, uint, 0644); -MODULE_PARM_DESC(thrtlwlimit, +#define MAX_THROTTLE_LOW_LIMIT 168 +static uint throttle_low_limit = 1; +module_param_named(throttle_low_limit, throttle_low_limit, uint, 0644); +MODULE_PARM_DESC(throttle_low_limit, "Value for THRTLOWLM activation field " "(0 = disable throttle, 1 = Max throttle, 168 = Min throttle)"); @@ -111,9 +113,9 @@ static int i7300_idle_ioat_start(void) static void i7300_idle_ioat_stop(void) { int i; - u8 sts; + u64 sts; - for (i = 0; i < 5; i++) { + for (i = 0; i < MAX_STOP_RETRIES; i++) { writeb(IOAT_CHANCMD_RESET, ioat_chanbase + IOAT1_CHANCMD_OFFSET); @@ -127,9 +129,10 @@ static void i7300_idle_ioat_stop(void) } - if (i == 5) - dprintk("failed to suspend+reset I/O AT after 5 retries\n"); - + if (i == MAX_STOP_RETRIES) { + dprintk("failed to stop I/O AT after %d retries\n", + MAX_STOP_RETRIES); + } } /* Test I/O AT by copying 1024 byte from 2k to 1k */ @@ -276,7 +279,7 @@ static void __exit i7300_idle_ioat_exit(void) i7300_idle_ioat_stop(); /* Wait for a while for the channel to halt before releasing */ - for (i = 0; i < 10; i++) { + for (i = 0; i < MAX_STOP_RETRIES; i++) { writeb(IOAT_CHANCMD_RESET, ioat_chanbase + IOAT1_CHANCMD_OFFSET); @@ -390,9 +393,9 @@ static void i7300_idle_start(void) new_ctl = i7300_idle_thrtctl_saved & ~DIMM_THRTCTL_THRMHUNT; pci_write_config_byte(fbd_dev, DIMM_THRTCTL, new_ctl); - limit = i7300_idle_thrtlowlm; - if (unlikely(limit > MAX_THRTLWLIMIT)) - limit = MAX_THRTLWLIMIT; + limit = throttle_low_limit; + if (unlikely(limit > MAX_THROTTLE_LOW_LIMIT)) + limit = MAX_THROTTLE_LOW_LIMIT; pci_write_config_byte(fbd_dev, DIMM_THRTLOW, limit); @@ -441,7 +444,7 @@ static int i7300_idle_notifier(struct notifier_block *nb, unsigned long val, static ktime_t idle_begin_time; static int time_init = 1; - if (!i7300_idle_thrtlowlm) + if (!throttle_low_limit) return 0; if (unlikely(time_init)) {