From: Carlos Eduardo Aguiar Date: Tue, 29 Jul 2008 16:44:23 +0000 (-0400) Subject: OMAP: MENELAUS: Using macros instead of some constant magic numbers. X-Git-Tag: v2.6.26-omap1~49 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=3305829b2816072b9c8ed01374b205ae4de74027;p=linux-2.6-omap-h63xx.git OMAP: MENELAUS: Using macros instead of some constant magic numbers. This patch makes drivers/i2c/chips/menelaus.c file to use macros instead of some constant magic numbers. Signed-off-by: Carlos Eduardo Aguiar Signed-off-by: Tony Lindgren --- diff --git a/drivers/i2c/chips/menelaus.c b/drivers/i2c/chips/menelaus.c index f02ce23ca0e..b7a7f016d0e 100644 --- a/drivers/i2c/chips/menelaus.c +++ b/drivers/i2c/chips/menelaus.c @@ -129,6 +129,39 @@ #define MENELAUS_RESERVED14_IRQ 14 /* Reserved */ #define MENELAUS_RESERVED15_IRQ 15 /* Reserved */ +/* VCORE_CTRL1 register */ +#define VCORE_CTRL1_BYP_COMP (1 << 5) +#define VCORE_CTRL1_HW_NSW (1 << 7) + +/* GPIO_CTRL register */ +#define GPIO_CTRL_SLOTSELEN (1 << 5) +#define GPIO_CTRL_SLPCTLEN (1 << 6) +#define GPIO1_DIR_INPUT (1 << 0) +#define GPIO2_DIR_INPUT (1 << 1) +#define GPIO3_DIR_INPUT (1 << 2) + +/* MCT_CTRL1 register */ +#define MCT_CTRL1_S1_CMD_OD (1 << 2) +#define MCT_CTRL1_S2_CMD_OD (1 << 3) + +/* MCT_CTRL2 register */ +#define MCT_CTRL2_VS2_SEL_D0 (1 << 0) +#define MCT_CTRL2_VS2_SEL_D1 (1 << 1) +#define MCT_CTRL2_S1CD_BUFEN (1 << 4) +#define MCT_CTRL2_S2CD_BUFEN (1 << 5) +#define MCT_CTRL2_S1CD_DBEN (1 << 6) +#define MCT_CTRL2_S2CD_BEN (1 << 7) + +/* MCT_CTRL3 register */ +#define MCT_CTRL3_SLOT1_EN (1 << 0) +#define MCT_CTRL3_SLOT2_EN (1 << 1) +#define MCT_CTRL3_S1_AUTO_EN (1 << 2) +#define MCT_CTRL3_S2_AUTO_EN (1 << 3) + +/* MCT_PIN_ST register */ +#define MCT_PIN_ST_S1_CD_ST (1 << 0) +#define MCT_PIN_ST_S2_CD_ST (1 << 1) + static void menelaus_work(struct work_struct *_menelaus); struct menelaus_chip { @@ -250,10 +283,10 @@ static void menelaus_mmc_cd_work(struct menelaus_chip *menelaus_hw) return; if (!(reg & 0x1)) - card_mask |= (1 << 0); + card_mask |= MCT_PIN_ST_S1_CD_ST; if (!(reg & 0x2)) - card_mask |= (1 << 1); + card_mask |= MCT_PIN_ST_S2_CD_ST; if (menelaus_hw->mmc_callback) menelaus_hw->mmc_callback(menelaus_hw->mmc_callback_data, @@ -278,14 +311,14 @@ int menelaus_set_mmc_opendrain(int slot, int enable) val = ret; if (slot == 1) { if (enable) - val |= 1 << 2; + val |= MCT_CTRL1_S1_CMD_OD; else - val &= ~(1 << 2); + val &= ~MCT_CTRL1_S1_CMD_OD; } else { if (enable) - val |= 1 << 3; + val |= MCT_CTRL1_S2_CMD_OD; else - val &= ~(1 << 3); + val &= ~MCT_CTRL1_S2_CMD_OD; } ret = menelaus_write_reg(MENELAUS_MCT_CTRL1, val); mutex_unlock(&the_menelaus->lock); @@ -302,11 +335,11 @@ int menelaus_set_slot_sel(int enable) ret = menelaus_read_reg(MENELAUS_GPIO_CTRL); if (ret < 0) goto out; - ret |= 0x02; + ret |= GPIO2_DIR_INPUT; if (enable) - ret |= 1 << 5; + ret |= GPIO_CTRL_SLOTSELEN; else - ret &= ~(1 << 5); + ret &= ~GPIO_CTRL_SLOTSELEN; ret = menelaus_write_reg(MENELAUS_GPIO_CTRL, ret); out: mutex_unlock(&the_menelaus->lock); @@ -325,14 +358,14 @@ int menelaus_enable_slot(int slot, int enable) val = ret; if (slot == 1) { if (enable) - val |= 1 << 0; + val |= MCT_CTRL3_SLOT1_EN; else - val &= ~(1 << 0); + val &= ~MCT_CTRL3_SLOT1_EN; } else { if (enable) - val |= 1 << 1; + val |= MCT_CTRL3_SLOT2_EN; else - val &= ~(1 << 1); + val &= MCT_CTRL3_SLOT2_EN; } ret = menelaus_write_reg(MENELAUS_MCT_CTRL3, val); @@ -359,14 +392,14 @@ int menelaus_set_mmc_slot(int slot, int enable, int power, int cd_en) val = ret; if (slot == 1) { if (cd_en) - val |= (1 << 4) | (1 << 6); + val |= MCT_CTRL2_S1CD_BUFEN | MCT_CTRL2_S1CD_DBEN; else - val &= ~((1 << 4) | (1 << 6)); + val &= ~(MCT_CTRL2_S1CD_BUFEN | MCT_CTRL2_S1CD_DBEN); } else { if (cd_en) - val |= (1 << 5) | (1 << 7); + val |= MCT_CTRL2_S2CD_BUFEN | MCT_CTRL2_S2CD_BEN; else - val &= ~((1 << 5) | (1 << 7)); + val &= ~(MCT_CTRL2_S2CD_BUFEN | MCT_CTRL2_S2CD_BEN); } ret = menelaus_write_reg(MENELAUS_MCT_CTRL2, val); if (ret < 0) @@ -378,25 +411,25 @@ int menelaus_set_mmc_slot(int slot, int enable, int power, int cd_en) val = ret; if (slot == 1) { if (enable) - val |= 1 << 0; + val |= MCT_CTRL3_SLOT1_EN; else - val &= ~(1 << 0); + val &= ~MCT_CTRL3_SLOT1_EN; } else { int b; if (enable) - val |= 1 << 1; + val |= MCT_CTRL3_SLOT2_EN; else - val &= ~(1 << 1); + val &= ~MCT_CTRL3_SLOT2_EN; b = menelaus_read_reg(MENELAUS_MCT_CTRL2); - b &= ~0x03; + b &= ~(MCT_CTRL2_VS2_SEL_D0 | MCT_CTRL2_VS2_SEL_D1); b |= power; ret = menelaus_write_reg(MENELAUS_MCT_CTRL2, b); if (ret < 0) goto out; } /* Disable autonomous shutdown */ - val &= ~(0x03 << 2); + val &= ~(MCT_CTRL3_S1_AUTO_EN | MCT_CTRL3_S2_AUTO_EN); ret = menelaus_write_reg(MENELAUS_MCT_CTRL3, val); out: mutex_unlock(&the_menelaus->lock); @@ -581,7 +614,7 @@ int menelaus_set_vcore_hw(unsigned int roof_mV, unsigned int floor_mV) if (!the_menelaus->vcore_hw_mode) { val = menelaus_read_reg(MENELAUS_VCORE_CTRL1); /* HW mode, turn OFF byte comparator */ - val |= ((1 << 7) | (1 << 5)); + val |= (VCORE_CTRL1_HW_NSW | VCORE_CTRL1_BYP_COMP); ret = menelaus_write_reg(MENELAUS_VCORE_CTRL1, val); the_menelaus->vcore_hw_mode = 1; } @@ -778,7 +811,7 @@ int menelaus_set_regulator_sleep(int enable, u32 val) ret = menelaus_read_reg(MENELAUS_GPIO_CTRL); if (ret < 0) goto out; - t = ((1 << 6) | 0x04); + t = (GPIO_CTRL_SLPCTLEN | GPIO3_DIR_INPUT); if (enable) ret |= t; else