From: Josh Boyer Date: Tue, 9 Sep 2008 04:00:28 +0000 (+0000) Subject: powerpc: Holly board needs dtbImage target X-Git-Tag: v2.6.27-rc7~13^2~1 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=32dde0f975e430f00f03f80f7dbab585d8b45eab;p=linux-2.6-omap-h63xx.git powerpc: Holly board needs dtbImage target One of the changes in the bootwrapper makefile introduced the dtbImage targets for boards that need a simple zImage with a DTB embedded in them (595be948cce574ff2d5dde5d0426a636a4363c70, "[POWERPC] bootwrapper: Build multiple cuImages"). When this was done, it broke booting on the Holly board as the zImage.holly wrapper did not get the DTB embedded properly. This changes the target for the Holly board to a dtbImage so that the wrapper includes the vmlinux, wrapper bits, and DTB. Signed-off-by: Josh Boyer Signed-off-by: Paul Mackerras --- diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 717a3bc1352..65d1a8454d2 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -195,7 +195,7 @@ image-$(CONFIG_PPC_CELLEB) += zImage.pseries image-$(CONFIG_PPC_CHRP) += zImage.chrp image-$(CONFIG_PPC_EFIKA) += zImage.chrp image-$(CONFIG_PPC_PMAC) += zImage.pmac -image-$(CONFIG_PPC_HOLLY) += zImage.holly +image-$(CONFIG_PPC_HOLLY) += dtbImage.holly image-$(CONFIG_PPC_PRPMC2800) += dtbImage.prpmc2800 image-$(CONFIG_PPC_ISERIES) += zImage.iseries image-$(CONFIG_DEFAULT_UIMAGE) += uImage