From: Andres Salomon Date: Mon, 28 Apr 2008 09:14:53 +0000 (-0700) Subject: x86: geode: MSR cleanup X-Git-Tag: v2.6.26-rc1~840 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=32bf87e3697cf2f730b8fbf47cad903ceef718a2;p=linux-2.6-omap-h63xx.git x86: geode: MSR cleanup This cleans up a few MSR-using drivers in the following manner: - Ensures MSRs are all defined in asm/geode.h, rather than in misc places - Makes the naming consistent; cs553[56] ones begin with MSR_, GX-specific ones start with MSR_GX_, and LX-specific ones start with MSR_LX_. Also, make the names match the data sheet. - Use MSR names rather than numbers in source code - Document the fact that the LX's MSR_PADSEL has the wrong value in the data sheet. That's, uh, good to note. Signed-off-by: Andres Salomon Acked-by: Jordan Crouse Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/arch/x86/kernel/mfgpt_32.c b/arch/x86/kernel/mfgpt_32.c index cfc2648d25f..3cad17fe026 100644 --- a/arch/x86/kernel/mfgpt_32.c +++ b/arch/x86/kernel/mfgpt_32.c @@ -63,7 +63,7 @@ static int __init mfgpt_fix(char *s) /* The following udocumented bit resets the MFGPT timers */ val = 0xFF; dummy = 0; - wrmsr(0x5140002B, val, dummy); + wrmsr(MSR_MFGPT_SETUP, val, dummy); return 1; } __setup("mfgptfix", mfgpt_fix); @@ -127,17 +127,17 @@ int geode_mfgpt_toggle_event(int timer, int cmp, int event, int enable) * 6; that is, resets for 7 and 8 will be ignored. Is this * a problem? -dilinger */ - msr = MFGPT_NR_MSR; + msr = MSR_MFGPT_NR; mask = 1 << (timer + 24); break; case MFGPT_EVENT_NMI: - msr = MFGPT_NR_MSR; + msr = MSR_MFGPT_NR; mask = 1 << (timer + shift); break; case MFGPT_EVENT_IRQ: - msr = MFGPT_IRQ_MSR; + msr = MSR_MFGPT_IRQ; mask = 1 << (timer + shift); break; diff --git a/drivers/video/geode/display_gx.h b/drivers/video/geode/display_gx.h index 0af33f329e8..df94e4fc662 100644 --- a/drivers/video/geode/display_gx.h +++ b/drivers/video/geode/display_gx.h @@ -17,7 +17,6 @@ int gx_line_delta(int xres, int bpp); extern struct geode_dc_ops gx_dc_ops; /* MSR that tells us if a TFT or CRT is attached */ -#define GLD_MSR_CONFIG 0xC0002001 #define GLD_MSR_CONFIG_DM_FP 0x40 /* Display controller registers */ diff --git a/drivers/video/geode/gxfb_core.c b/drivers/video/geode/gxfb_core.c index cf841efa229..4e22ee0377e 100644 --- a/drivers/video/geode/gxfb_core.c +++ b/drivers/video/geode/gxfb_core.c @@ -30,6 +30,7 @@ #include #include #include +#include #include "geodefb.h" #include "display_gx.h" @@ -326,7 +327,7 @@ static int __init gxfb_probe(struct pci_dev *pdev, const struct pci_device_id *i /* Figure out if this is a TFT or CRT part */ - rdmsrl(GLD_MSR_CONFIG, val); + rdmsrl(MSR_GX_GLD_MSR_CONFIG, val); if ((val & GLD_MSR_CONFIG_DM_FP) == GLD_MSR_CONFIG_DM_FP) par->enable_crt = 0; diff --git a/drivers/video/geode/lxfb.h b/drivers/video/geode/lxfb.h index ca13c48d19b..8c83a1b4439 100644 --- a/drivers/video/geode/lxfb.h +++ b/drivers/video/geode/lxfb.h @@ -31,14 +31,6 @@ void lx_set_palette_reg(struct fb_info *, unsigned int, unsigned int, /* MSRS */ -#define MSR_LX_GLD_CONFIG 0x48002001 -#define MSR_LX_GLCP_DOTPLL 0x4c000015 -#define MSR_LX_DF_PADSEL 0x48002011 -#define MSR_LX_DC_SPARE 0x80000011 -#define MSR_LX_DF_GLCONFIG 0x48002001 - -#define MSR_LX_GLIU0_P2D_RO0 0x10000029 - #define GLCP_DOTPLL_RESET (1 << 0) #define GLCP_DOTPLL_BYPASS (1 << 15) #define GLCP_DOTPLL_HALFPIX (1 << 24) diff --git a/drivers/video/geode/lxfb_ops.c b/drivers/video/geode/lxfb_ops.c index 4fbc99be96e..a52c180062c 100644 --- a/drivers/video/geode/lxfb_ops.c +++ b/drivers/video/geode/lxfb_ops.c @@ -13,6 +13,7 @@ #include #include #include +#include #include "lxfb.h" @@ -101,7 +102,7 @@ static void lx_set_dotpll(u32 pllval) u32 dotpll_lo, dotpll_hi; int i; - rdmsr(MSR_LX_GLCP_DOTPLL, dotpll_lo, dotpll_hi); + rdmsr(MSR_GLCP_DOTPLL, dotpll_lo, dotpll_hi); if ((dotpll_lo & GLCP_DOTPLL_LOCK) && (dotpll_hi == pllval)) return; @@ -110,7 +111,7 @@ static void lx_set_dotpll(u32 pllval) dotpll_lo &= ~(GLCP_DOTPLL_BYPASS | GLCP_DOTPLL_HALFPIX); dotpll_lo |= GLCP_DOTPLL_RESET; - wrmsr(MSR_LX_GLCP_DOTPLL, dotpll_lo, dotpll_hi); + wrmsr(MSR_GLCP_DOTPLL, dotpll_lo, dotpll_hi); /* Wait 100us for the PLL to lock */ @@ -119,7 +120,7 @@ static void lx_set_dotpll(u32 pllval) /* Now, loop for the lock bit */ for (i = 0; i < 1000; i++) { - rdmsr(MSR_LX_GLCP_DOTPLL, dotpll_lo, dotpll_hi); + rdmsr(MSR_GLCP_DOTPLL, dotpll_lo, dotpll_hi); if (dotpll_lo & GLCP_DOTPLL_LOCK) break; } @@ -127,7 +128,7 @@ static void lx_set_dotpll(u32 pllval) /* Clear the reset bit */ dotpll_lo &= ~GLCP_DOTPLL_RESET; - wrmsr(MSR_LX_GLCP_DOTPLL, dotpll_lo, dotpll_hi); + wrmsr(MSR_GLCP_DOTPLL, dotpll_lo, dotpll_hi); } /* Set the clock based on the frequency specified by the current mode */ @@ -255,7 +256,7 @@ static void lx_graphics_enable(struct fb_info *info) msrlo = DF_DEFAULT_TFT_PAD_SEL_LOW; msrhi = DF_DEFAULT_TFT_PAD_SEL_HIGH; - wrmsr(MSR_LX_DF_PADSEL, msrlo, msrhi); + wrmsr(MSR_LX_MSR_PADSEL, msrlo, msrhi); } if (par->output & OUTPUT_CRT) { @@ -321,7 +322,7 @@ void lx_set_mode(struct fb_info *info) /* Set output mode */ - rdmsrl(MSR_LX_DF_GLCONFIG, msrval); + rdmsrl(MSR_LX_GLD_MSR_CONFIG, msrval); msrval &= ~DF_CONFIG_OUTPUT_MASK; if (par->output & OUTPUT_PANEL) { @@ -335,7 +336,7 @@ void lx_set_mode(struct fb_info *info) msrval |= DF_OUTPUT_CRT; } - wrmsrl(MSR_LX_DF_GLCONFIG, msrval); + wrmsrl(MSR_LX_GLD_MSR_CONFIG, msrval); /* Clear the various buffers */ /* FIXME: Adjust for panning here */ @@ -383,13 +384,13 @@ void lx_set_mode(struct fb_info *info) /* Set default watermark values */ - rdmsrl(MSR_LX_DC_SPARE, msrval); + rdmsrl(MSR_LX_SPARE_MSR, msrval); msrval &= ~(DC_SPARE_DISABLE_CFIFO_HGO | DC_SPARE_VFIFO_ARB_SELECT | DC_SPARE_LOAD_WM_LPEN_MASK | DC_SPARE_WM_LPEN_OVRD | DC_SPARE_DISABLE_INIT_VID_PRI | DC_SPARE_DISABLE_VFIFO_WM); msrval |= DC_SPARE_DISABLE_VFIFO_WM | DC_SPARE_DISABLE_INIT_VID_PRI; - wrmsrl(MSR_LX_DC_SPARE, msrval); + wrmsrl(MSR_LX_SPARE_MSR, msrval); gcfg = DC_GCFG_DFLE; /* Display fifo enable */ gcfg |= 0xB600; /* Set default priority */ diff --git a/drivers/video/geode/video_gx.c b/drivers/video/geode/video_gx.c index febf09c6349..d0885370675 100644 --- a/drivers/video/geode/video_gx.c +++ b/drivers/video/geode/video_gx.c @@ -16,6 +16,7 @@ #include #include #include +#include #include "geodefb.h" #include "video_gx.h" @@ -184,10 +185,10 @@ gx_configure_tft(struct fb_info *info) /* Set up the DF pad select MSR */ - rdmsrl(GX_VP_MSR_PAD_SELECT, val); + rdmsrl(MSR_GX_MSR_PADSEL, val); val &= ~GX_VP_PAD_SELECT_MASK; val |= GX_VP_PAD_SELECT_TFT; - wrmsrl(GX_VP_MSR_PAD_SELECT, val); + wrmsrl(MSR_GX_MSR_PADSEL, val); /* Turn off the panel */ diff --git a/drivers/video/geode/video_gx.h b/drivers/video/geode/video_gx.h index ce28d8f382d..d21bca02059 100644 --- a/drivers/video/geode/video_gx.h +++ b/drivers/video/geode/video_gx.h @@ -14,7 +14,6 @@ extern struct geode_vid_ops gx_vid_ops; /* GX Flatpanel control MSR */ -#define GX_VP_MSR_PAD_SELECT 0xC0002011 #define GX_VP_PAD_SELECT_MASK 0x3FFFFFFF #define GX_VP_PAD_SELECT_TFT 0x1FFFFFFF @@ -59,12 +58,10 @@ extern struct geode_vid_ops gx_vid_ops; /* Geode GX clock control MSRs */ -#define MSR_GLCP_SYS_RSTPLL 0x4c000014 # define MSR_GLCP_SYS_RSTPLL_DOTPREDIV2 (0x0000000000000002ull) # define MSR_GLCP_SYS_RSTPLL_DOTPREMULT2 (0x0000000000000004ull) # define MSR_GLCP_SYS_RSTPLL_DOTPOSTDIV3 (0x0000000000000008ull) -#define MSR_GLCP_DOTPLL 0x4c000015 # define MSR_GLCP_DOTPLL_DOTRESET (0x0000000000000001ull) # define MSR_GLCP_DOTPLL_BYPASS (0x0000000000008000ull) # define MSR_GLCP_DOTPLL_LOCK (0x0000000002000000ull) diff --git a/include/asm-x86/geode.h b/include/asm-x86/geode.h index 9870cc1f2f8..b1bdf637856 100644 --- a/include/asm-x86/geode.h +++ b/include/asm-x86/geode.h @@ -30,7 +30,11 @@ extern int geode_get_dev_base(unsigned int dev); /* MSRS */ -#define GX_GLCP_SYS_RSTPLL 0x4C000014 +#define MSR_LX_GLD_MSR_CONFIG 0x48002001 +#define MSR_LX_MSR_PADSEL 0x48002011 /* NOT 0x48000011; the data + * sheet has the wrong value */ +#define MSR_GLCP_SYS_RSTPLL 0x4C000014 +#define MSR_GLCP_DOTPLL 0x4C000015 #define MSR_LBAR_SMB 0x5140000B #define MSR_LBAR_GPIO 0x5140000C @@ -45,8 +49,14 @@ extern int geode_get_dev_base(unsigned int dev); #define MSR_PIC_ZSEL_LOW 0x51400022 #define MSR_PIC_ZSEL_HIGH 0x51400023 -#define MFGPT_IRQ_MSR 0x51400028 -#define MFGPT_NR_MSR 0x51400029 +#define MSR_MFGPT_IRQ 0x51400028 +#define MSR_MFGPT_NR 0x51400029 +#define MSR_MFGPT_SETUP 0x5140002B + +#define MSR_LX_SPARE_MSR 0x80000011 /* DC-specific */ + +#define MSR_GX_GLD_MSR_CONFIG 0xC0002001 +#define MSR_GX_MSR_PADSEL 0xC0002011 /* Resource Sizes */