From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Fri, 6 Feb 2009 14:27:13 +0000 (+0100)
Subject: mfd: Support active high IRQs on WM835x
X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=3206450355100eae8e033645318b95bb60f1faff;p=linux-2.6-omap-h63xx.git

mfd: Support active high IRQs on WM835x

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
---

diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c
index f22b18b7079..a285cc0cc70 100644
--- a/drivers/mfd/wm8350-core.c
+++ b/drivers/mfd/wm8350-core.c
@@ -1438,7 +1438,21 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq,
 	mutex_init(&wm8350->irq_mutex);
 	INIT_WORK(&wm8350->irq_work, wm8350_irq_worker);
 	if (irq) {
-		ret = request_irq(irq, wm8350_irq, 0,
+		int flags = 0;
+
+		if (pdata && pdata->irq_high) {
+			flags |= IRQF_TRIGGER_HIGH;
+
+			wm8350_set_bits(wm8350, WM8350_SYSTEM_CONTROL_1,
+					WM8350_IRQ_POL);
+		} else {
+			flags |= IRQF_TRIGGER_LOW;
+
+			wm8350_clear_bits(wm8350, WM8350_SYSTEM_CONTROL_1,
+					  WM8350_IRQ_POL);
+		}
+
+		ret = request_irq(irq, wm8350_irq, flags,
 				  "wm8350", wm8350);
 		if (ret != 0) {
 			dev_err(wm8350->dev, "Failed to request IRQ: %d\n",
diff --git a/include/linux/mfd/wm8350/core.h b/include/linux/mfd/wm8350/core.h
index 980669d50dc..42cca672f34 100644
--- a/include/linux/mfd/wm8350/core.h
+++ b/include/linux/mfd/wm8350/core.h
@@ -640,9 +640,11 @@ struct wm8350 {
  *
  * @init: Function called during driver initialisation.  Should be
  *        used by the platform to configure GPIO functions and similar.
+ * @irq_high: Set if WM8350 IRQ is active high.
  */
 struct wm8350_platform_data {
 	int (*init)(struct wm8350 *wm8350);
+	int irq_high;
 };