From: Jiri Slaby Date: Thu, 7 Feb 2008 08:16:40 +0000 (-0800) Subject: Char: serial167, remove bottomhalf X-Git-Tag: v2.6.25-rc1~313 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=3099bbc59435928fbd1f4ebd835f825bca755bbb;p=linux-2.6-omap-h63xx.git Char: serial167, remove bottomhalf - Cy_EVENT_OPEN_WAKEUP is simple wake_up - Cy_EVENT_HANGUP is wake_up + tty_hangup, which schedules its own work - Cy_EVENT_WRITE_WAKEUP is tty_wakeup which may be called directly too Signed-off-by: Jiri Slaby Acked-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c index cbf21cc7b56..df8cd0ca97e 100644 --- a/drivers/char/serial167.c +++ b/drivers/char/serial167.c @@ -357,18 +357,6 @@ static void cy_start(struct tty_struct *tty) local_irq_restore(flags); } /* cy_start */ -/* - * This routine is used by the interrupt handler to schedule - * processing in the software interrupt portion of the driver - * (also known as the "bottom half"). This can be called any - * number of times for any channel without harm. - */ -static inline void cy_sched_event(struct cyclades_port *info, int event) -{ - info->event |= 1 << event; /* remember what kind of event and who */ - schedule_work(&info->tqueue); -} /* cy_sched_event */ - /* The real interrupt service routines are called whenever the card wants its hand held--chars received, out buffer empty, modem change, etc. @@ -483,10 +471,12 @@ static irqreturn_t cd2401_modem_interrupt(int irq, void *dev_id) && (info->flags & ASYNC_CHECK_CD)) { if (mdm_status & CyDCD) { /* CP('!'); */ - cy_sched_event(info, Cy_EVENT_OPEN_WAKEUP); + wake_up_interruptible(&info->open_wait); } else { /* CP('@'); */ - cy_sched_event(info, Cy_EVENT_HANGUP); + tty_hangup(info->tty); + wake_up_interruptible(&info->open_wait); + info->flags &= ~ASYNC_NORMAL_ACTIVE; } } if ((mdm_change & CyCTS) @@ -496,8 +486,7 @@ static irqreturn_t cd2401_modem_interrupt(int irq, void *dev_id) /* !!! cy_start isn't used because... */ info->tty->stopped = 0; base_addr[CyIER] |= CyTxMpty; - cy_sched_event(info, - Cy_EVENT_WRITE_WAKEUP); + tty_wakeup(info->tty); } } else { if (!(mdm_status & CyCTS)) { @@ -543,9 +532,6 @@ static irqreturn_t cd2401_tx_interrupt(int irq, void *dev_id) info->last_active = jiffies; if (info->tty == 0) { base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy); - if (info->xmit_cnt < WAKEUP_CHARS) { - cy_sched_event(info, Cy_EVENT_WRITE_WAKEUP); - } base_addr[CyTEOIR] = CyNOTRANS; return IRQ_HANDLED; } @@ -627,9 +613,9 @@ static irqreturn_t cd2401_tx_interrupt(int irq, void *dev_id) } } - if (info->xmit_cnt < WAKEUP_CHARS) { - cy_sched_event(info, Cy_EVENT_WRITE_WAKEUP); - } + if (info->xmit_cnt < WAKEUP_CHARS) + tty_wakeup(info->tty); + base_addr[CyTEOIR] = (char_count != saved_cnt) ? 0 : CyNOTRANS; return IRQ_HANDLED; } /* cy_tx_interrupt */ @@ -690,49 +676,6 @@ static irqreturn_t cd2401_rx_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } /* cy_rx_interrupt */ -/* - * This routine is used to handle the "bottom half" processing for the - * serial driver, known also the "software interrupt" processing. - * This processing is done at the kernel interrupt level, after the - * cy#/_interrupt() has returned, BUT WITH INTERRUPTS TURNED ON. This - * is where time-consuming activities which can not be done in the - * interrupt driver proper are done; the interrupt driver schedules - * them using cy_sched_event(), and they get done here. - * - * This is done through one level of indirection--the task queue. - * When a hardware interrupt service routine wants service by the - * driver's bottom half, it enqueues the appropriate tq_struct (one - * per port) to the keventd work queue and sets a request flag - * that the work queue be processed. - * - * Although this may seem unwieldy, it gives the system a way to - * pass an argument (in this case the pointer to the cyclades_port - * structure) to the bottom half of the driver. Previous kernels - * had to poll every port to see if that port needed servicing. - */ -static void do_softint(struct work_struct *ugly_api) -{ - struct cyclades_port *info = - container_of(ugly_api, struct cyclades_port, tqueue); - struct tty_struct *tty; - - tty = info->tty; - if (!tty) - return; - - if (test_and_clear_bit(Cy_EVENT_HANGUP, &info->event)) { - tty_hangup(info->tty); - wake_up_interruptible(&info->open_wait); - info->flags &= ~ASYNC_NORMAL_ACTIVE; - } - if (test_and_clear_bit(Cy_EVENT_OPEN_WAKEUP, &info->event)) { - wake_up_interruptible(&info->open_wait); - } - if (test_and_clear_bit(Cy_EVENT_WRITE_WAKEUP, &info->event)) { - tty_wakeup(tty); - } -} /* do_softint */ - /* This is called whenever a port becomes active; interrupts are enabled and DTR & RTS are turned on. */ @@ -1743,7 +1686,6 @@ static void cy_close(struct tty_struct *tty, struct file *filp) if (tty->driver->flush_buffer) tty->driver->flush_buffer(tty); tty_ldisc_flush(tty); - info->event = 0; info->tty = NULL; if (info->blocked_open) { if (info->close_delay) { @@ -2234,7 +2176,6 @@ static int __init serial167_init(void) info->rco = baud_co[DefSpeed] >> 5; /* Rx CO */ info->close_delay = 0; info->x_char = 0; - info->event = 0; info->count = 0; #ifdef SERIAL_DEBUG_COUNT printk("cyc: %d: setting count to 0\n", @@ -2243,7 +2184,6 @@ static int __init serial167_init(void) info->blocked_open = 0; info->default_threshold = 0; info->default_timeout = 0; - INIT_WORK(&info->tqueue, do_softint); init_waitqueue_head(&info->open_wait); init_waitqueue_head(&info->close_wait); /* info->session */ diff --git a/include/linux/serial167.h b/include/linux/serial167.h index 71b6df2516a..59c81b70856 100644 --- a/include/linux/serial167.h +++ b/include/linux/serial167.h @@ -37,7 +37,6 @@ struct cyclades_port { int ignore_status_mask; int close_delay; int IER; /* Interrupt Enable Register */ - unsigned long event; unsigned long last_active; int count; /* # of fd on device */ int x_char; /* to be pushed out ASAP */ @@ -49,7 +48,6 @@ struct cyclades_port { int xmit_cnt; int default_threshold; int default_timeout; - struct work_struct tqueue; wait_queue_head_t open_wait; wait_queue_head_t close_wait; struct cyclades_monitor mon; @@ -67,18 +65,6 @@ struct cyclades_port { #define CYGETDEFTIMEOUT 0x435908 #define CYSETDEFTIMEOUT 0x435909 -/* - * Events are used to schedule things to happen at timer-interrupt - * time, instead of at cy interrupt time. - */ -#define Cy_EVENT_READ_PROCESS 0 -#define Cy_EVENT_WRITE_WAKEUP 1 -#define Cy_EVENT_HANGUP 2 -#define Cy_EVENT_BREAK 3 -#define Cy_EVENT_OPEN_WAKEUP 4 - - - #define CyMaxChipsPerCard 1 /**** cd2401 registers ****/