From: Bryan Wu <cooloney@kernel.org>
Date: Sat, 31 May 2008 07:17:25 +0000 (+0800)
Subject: Blackfin arch: Fix bug - set corret SSEL and IRQ to enable AD7877 on BF527
X-Git-Tag: v2.6.26-rc5~26^2~3
X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=2eb74ae20e65e71c2d5bf7b8ad7d0ac5d5acf55f;p=linux-2.6-omap-h63xx.git

Blackfin arch: Fix bug - set corret SSEL and IRQ to enable AD7877 on BF527

AD7877 use SSEL_2 (P9.9) and IRQ_PF8 (P9.14) on BF527

 - populating JP3 to enable STAMP
 - disable SW11.2 to disconnect SSEL_2/PF12 from Rotary NAND
 - disable SW18.1 to disconnect SSEL_2 from MAX1233 touchscreen chip

Signed-off-by: Bryan Wu <cooloney@kernel.org>
---

diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index bb6d58c931d..fa4f4e833e8 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -647,10 +647,10 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	{
 		.modalias		= "ad7877",
 		.platform_data		= &bfin_ad7877_ts_info,
-		.irq			= IRQ_PF6,
+		.irq			= IRQ_PF8,
 		.max_speed_hz	= 12500000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num	= 0,
-		.chip_select  = 1,
+		.chip_select  = 2,
 		.controller_data = &spi_ad7877_chip_info,
 	},
 #endif