From: Nicolas Pitre Date: Wed, 15 Aug 2007 17:27:29 +0000 (-0400) Subject: sdio: add default c_ispeed/c_ospeed values to sdio_uart driver X-Git-Tag: v2.6.24-rc1~1464^2~24 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=2ba30eedec37e2f65babf4ea54233f98afbe0871;p=linux-2.6-omap-h63xx.git sdio: add default c_ispeed/c_ospeed values to sdio_uart driver Note that the default baudrate is 4800 instead of 9600 as a convenience because that's what GPS devices want which is still the main use for this driver. Signed-off-by: Nicolas Pitre Signed-off-by: Pierre Ossman --- diff --git a/drivers/mmc/card/sdio_uart.c b/drivers/mmc/card/sdio_uart.c index 190120d1449..606100212af 100644 --- a/drivers/mmc/card/sdio_uart.c +++ b/drivers/mmc/card/sdio_uart.c @@ -1106,6 +1106,8 @@ static int __init sdio_uart_init(void) tty_drv->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; tty_drv->init_termios = tty_std_termios; tty_drv->init_termios.c_cflag = B4800 | CS8 | CREAD | HUPCL | CLOCAL; + tty_drv->init_termios.c_ispeed = 4800; + tty_drv->init_termios.c_ospeed = 4800; tty_set_operations(tty_drv, &sdio_uart_ops); ret = tty_register_driver(tty_drv);