From: Eric Miao <eric.miao@marvell.com>
Date: Mon, 8 Sep 2008 06:15:08 +0000 (+0800)
Subject: [ARM] pxa: move i2c register and bit definitions into i2c-pxa.c
X-Git-Tag: v2.6.28-rc1~293^2~6^2~15
X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=283afa06619ed3e4dd7b5431f862fe23625c452f;p=linux-2.6-omap-h63xx.git

[ARM] pxa: move i2c register and bit definitions into i2c-pxa.c

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---

diff --git a/arch/arm/mach-pxa/include/mach/pxa-regs.h b/arch/arm/mach-pxa/include/mach/pxa-regs.h
index 772c67635e2..b6b80f63b4d 100644
--- a/arch/arm/mach-pxa/include/mach/pxa-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa-regs.h
@@ -418,51 +418,9 @@
 
 
 /*
- * I2C registers
+ * I2C registers - moved into drivers/i2c/busses/i2c-pxa.c
  */
 
-#define IBMR		__REG(0x40301680)  /* I2C Bus Monitor Register - IBMR */
-#define IDBR		__REG(0x40301688)  /* I2C Data Buffer Register - IDBR */
-#define ICR		__REG(0x40301690)  /* I2C Control Register - ICR */
-#define ISR		__REG(0x40301698)  /* I2C Status Register - ISR */
-#define ISAR		__REG(0x403016A0)  /* I2C Slave Address Register - ISAR */
-
-#define PWRIBMR    __REG(0x40f00180)  /* Power I2C Bus Monitor Register-IBMR */
-#define PWRIDBR    __REG(0x40f00188)  /* Power I2C Data Buffer Register-IDBR */
-#define PWRICR __REG(0x40f00190)  /* Power I2C Control Register - ICR */
-#define PWRISR __REG(0x40f00198)  /* Power I2C Status Register - ISR */
-#define PWRISAR    __REG(0x40f001A0)  /*Power I2C Slave Address Register-ISAR */
-
-#define ICR_START	(1 << 0)	   /* start bit */
-#define ICR_STOP	(1 << 1)	   /* stop bit */
-#define ICR_ACKNAK	(1 << 2)	   /* send ACK(0) or NAK(1) */
-#define ICR_TB		(1 << 3)	   /* transfer byte bit */
-#define ICR_MA		(1 << 4)	   /* master abort */
-#define ICR_SCLE	(1 << 5)	   /* master clock enable */
-#define ICR_IUE		(1 << 6)	   /* unit enable */
-#define ICR_GCD		(1 << 7)	   /* general call disable */
-#define ICR_ITEIE	(1 << 8)	   /* enable tx interrupts */
-#define ICR_IRFIE	(1 << 9)	   /* enable rx interrupts */
-#define ICR_BEIE	(1 << 10)	   /* enable bus error ints */
-#define ICR_SSDIE	(1 << 11)	   /* slave STOP detected int enable */
-#define ICR_ALDIE	(1 << 12)	   /* enable arbitration interrupt */
-#define ICR_SADIE	(1 << 13)	   /* slave address detected int enable */
-#define ICR_UR		(1 << 14)	   /* unit reset */
-#define ICR_FM		(1 << 15)	   /* fast mode */
-
-#define ISR_RWM		(1 << 0)	   /* read/write mode */
-#define ISR_ACKNAK	(1 << 1)	   /* ack/nak status */
-#define ISR_UB		(1 << 2)	   /* unit busy */
-#define ISR_IBB		(1 << 3)	   /* bus busy */
-#define ISR_SSD		(1 << 4)	   /* slave stop detected */
-#define ISR_ALD		(1 << 5)	   /* arbitration loss detected */
-#define ISR_ITE		(1 << 6)	   /* tx buffer empty */
-#define ISR_IRF		(1 << 7)	   /* rx buffer full */
-#define ISR_GCAD	(1 << 8)	   /* general call address detected */
-#define ISR_SAD		(1 << 9)	   /* slave address detected */
-#define ISR_BED		(1 << 10)	   /* bus error no ACK/NAK */
-
-
 /*
  * Serial Audio Controller
  */
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index 8b38ed0379d..906f9b9d715 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -38,7 +38,44 @@
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <mach/i2c.h>
-#include <mach/pxa-regs.h>
+
+/*
+ * I2C registers and bit definitions
+ */
+#define IBMR		(0x00)
+#define IDBR		(0x08)
+#define ICR		(0x10)
+#define ISR		(0x18)
+#define ISAR		(0x20)
+
+#define ICR_START	(1 << 0)	   /* start bit */
+#define ICR_STOP	(1 << 1)	   /* stop bit */
+#define ICR_ACKNAK	(1 << 2)	   /* send ACK(0) or NAK(1) */
+#define ICR_TB		(1 << 3)	   /* transfer byte bit */
+#define ICR_MA		(1 << 4)	   /* master abort */
+#define ICR_SCLE	(1 << 5)	   /* master clock enable */
+#define ICR_IUE		(1 << 6)	   /* unit enable */
+#define ICR_GCD		(1 << 7)	   /* general call disable */
+#define ICR_ITEIE	(1 << 8)	   /* enable tx interrupts */
+#define ICR_IRFIE	(1 << 9)	   /* enable rx interrupts */
+#define ICR_BEIE	(1 << 10)	   /* enable bus error ints */
+#define ICR_SSDIE	(1 << 11)	   /* slave STOP detected int enable */
+#define ICR_ALDIE	(1 << 12)	   /* enable arbitration interrupt */
+#define ICR_SADIE	(1 << 13)	   /* slave address detected int enable */
+#define ICR_UR		(1 << 14)	   /* unit reset */
+#define ICR_FM		(1 << 15)	   /* fast mode */
+
+#define ISR_RWM		(1 << 0)	   /* read/write mode */
+#define ISR_ACKNAK	(1 << 1)	   /* ack/nak status */
+#define ISR_UB		(1 << 2)	   /* unit busy */
+#define ISR_IBB		(1 << 3)	   /* bus busy */
+#define ISR_SSD		(1 << 4)	   /* slave stop detected */
+#define ISR_ALD		(1 << 5)	   /* arbitration loss detected */
+#define ISR_ITE		(1 << 6)	   /* tx buffer empty */
+#define ISR_IRF		(1 << 7)	   /* rx buffer full */
+#define ISR_GCAD	(1 << 8)	   /* general call address detected */
+#define ISR_SAD		(1 << 9)	   /* slave address detected */
+#define ISR_BED		(1 << 10)	   /* bus error no ACK/NAK */
 
 struct pxa_i2c {
 	spinlock_t		lock;