From: James Bottomley Date: Fri, 11 Jul 2008 03:10:55 +0000 (-0500) Subject: [SCSI] fusion: default MSI to disabled for SPI and FC controllers X-Git-Tag: v2.6.26~6^2~1 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=27898988174bb211fd962ea73b9c6dc09f888705;p=linux-2.6-omap-h63xx.git [SCSI] fusion: default MSI to disabled for SPI and FC controllers There's a fault on the FC controllers that makes them not respond correctly to MSI. The SPI controllers are fine, but are likely to be onboard on older motherboards which don't handle MSI correctly, so default both these cases to disabled. Enable by setting the module parameter mpt_msi_enable=1. For the SAS case, enable MSI by default, but it can be disabled by setting the module parameter mpt_msi_enable=0. Cc: "Prakash, Sathya" Signed-off-by: James Bottomley --- diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c index db3c892f87f..d40d6d15ae2 100644 --- a/drivers/message/fusion/mptbase.c +++ b/drivers/message/fusion/mptbase.c @@ -1686,9 +1686,14 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id) ioc->bus_type = SAS; } - if (ioc->bus_type == SAS && mpt_msi_enable == -1) - ioc->msi_enable = 1; - else + if (mpt_msi_enable == -1) { + /* Enable on SAS, disable on FC and SPI */ + if (ioc->bus_type == SAS) + ioc->msi_enable = 1; + else + ioc->msi_enable = 0; + } else + /* follow flag: 0 - disable; 1 - enable */ ioc->msi_enable = mpt_msi_enable; if (ioc->errata_flag_1064)