From: Kevin Hilman Date: Tue, 16 Dec 2008 17:06:35 +0000 (-0800) Subject: OMAP: move GP timer selection alongside other timer options X-Git-Tag: v2.6.28-omap1~22 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=20752c3fd65bc6e84faebc7341c8495d75c171bc;p=linux-2.6-omap-h63xx.git OMAP: move GP timer selection alongside other timer options Signed-off-by: Kevin Hilman --- diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index ca24a7a37c3..0a86a88d528 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -132,19 +132,3 @@ config MACH_OVERO config MACH_OMAP3_PANDORA bool "OMAP3 Pandora" depends on ARCH_OMAP3 && ARCH_OMAP34XX - -config OMAP_TICK_GPTIMER - int "GPTIMER used for system tick timer" - depends on ARCH_OMAP2 || ARCH_OMAP3 - range 1 12 - default 1 - help - Linux uses one of the twelve on-board OMAP GPTIMER blocks to generate - system tick interrupts. The twelve GPTIMERs have slightly - different powerdomain, source clock, and security properties - (mostly documented in the OMAP3 TRMs) that can affect the selection - of which GPTIMER to use. The historical default is GPTIMER1. - If CONFIG_OMAP_32K_TIMER is selected, Beagle may require GPTIMER12 - due to hardware sensitivity to glitches on the OMAP 32kHz clock - input. - diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index 2465aea097a..6c9f09257db 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -214,6 +214,21 @@ config OMAP_32K_TIMER_HZ Kernel internal timer frequency should be a divisor of 32768, such as 64 or 128. +config OMAP_TICK_GPTIMER + int "GPTIMER used for system tick timer" + depends on ARCH_OMAP2 || ARCH_OMAP3 + range 1 12 + default 1 + help + Linux uses one of the twelve on-board OMAP GPTIMER blocks to generate + system tick interrupts. The twelve GPTIMERs have slightly + different powerdomain, source clock, and security properties + (mostly documented in the OMAP3 TRMs) that can affect the selection + of which GPTIMER to use. The historical default is GPTIMER1. + If CONFIG_OMAP_32K_TIMER is selected, Beagle may require GPTIMER12 + due to hardware sensitivity to glitches on the OMAP 32kHz clock + input. + config OMAP_DM_TIMER bool "Use dual-mode timer" depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX