From: Alessandro Zummo Date: Mon, 27 Mar 2006 09:16:42 +0000 (-0800) Subject: [PATCH] RTC subsystem: X1205 driver X-Git-Tag: v2.6.17-rc1~364 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=1fec7c66ba98fc3a04e15fd14fad6b404e56fc94;p=linux-2.6-omap-h63xx.git [PATCH] RTC subsystem: X1205 driver A port of the existing x1205 driver under the new RTC subsystem. It is actually under test within the NSLU2 project (http://www.nslu2-linux.org) and it is working quite well. It is the first driver under this new subsystem and should be used as a guide to port other drivers. Signed-off-by: Alessandro Zummo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 8e4dc32058d..3de823f2f05 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -76,4 +76,14 @@ config RTC_INTF_DEV comment "RTC drivers" depends on RTC_CLASS +config RTC_DRV_X1205 + tristate "Xicor/Intersil X1205" + depends on RTC_CLASS && I2C + help + If you say yes here you get support for the + Xicor/Intersil X1205 RTC chip. + + This driver can also be built as a module. If so, the module + will be called rtc-x1205. + endmenu diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index 38a9212a7f3..eaf89b22db7 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -10,3 +10,6 @@ rtc-core-y := class.o interface.o obj-$(CONFIG_RTC_INTF_SYSFS) += rtc-sysfs.o obj-$(CONFIG_RTC_INTF_PROC) += rtc-proc.o obj-$(CONFIG_RTC_INTF_DEV) += rtc-dev.o + +obj-$(CONFIG_RTC_DRV_X1205) += rtc-x1205.o + diff --git a/drivers/rtc/rtc-x1205.c b/drivers/rtc/rtc-x1205.c new file mode 100644 index 00000000000..621d17afc0d --- /dev/null +++ b/drivers/rtc/rtc-x1205.c @@ -0,0 +1,619 @@ +/* + * An i2c driver for the Xicor/Intersil X1205 RTC + * Copyright 2004 Karen Spearel + * Copyright 2005 Alessandro Zummo + * + * please send all reports to: + * Karen Spearel + * Alessandro Zummo + * + * based on a lot of other RTC drivers. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include + +#define DRV_VERSION "1.0.6" + +/* Addresses to scan: none. This chip is located at + * 0x6f and uses a two bytes register addressing. + * Two bytes need to be written to read a single register, + * while most other chips just require one and take the second + * one as the data to be written. To prevent corrupting + * unknown chips, the user must explicitely set the probe parameter. + */ + +static unsigned short normal_i2c[] = { I2C_CLIENT_END }; + +/* Insmod parameters */ +I2C_CLIENT_INSMOD; + +/* offsets into CCR area */ + +#define CCR_SEC 0 +#define CCR_MIN 1 +#define CCR_HOUR 2 +#define CCR_MDAY 3 +#define CCR_MONTH 4 +#define CCR_YEAR 5 +#define CCR_WDAY 6 +#define CCR_Y2K 7 + +#define X1205_REG_SR 0x3F /* status register */ +#define X1205_REG_Y2K 0x37 +#define X1205_REG_DW 0x36 +#define X1205_REG_YR 0x35 +#define X1205_REG_MO 0x34 +#define X1205_REG_DT 0x33 +#define X1205_REG_HR 0x32 +#define X1205_REG_MN 0x31 +#define X1205_REG_SC 0x30 +#define X1205_REG_DTR 0x13 +#define X1205_REG_ATR 0x12 +#define X1205_REG_INT 0x11 +#define X1205_REG_0 0x10 +#define X1205_REG_Y2K1 0x0F +#define X1205_REG_DWA1 0x0E +#define X1205_REG_YRA1 0x0D +#define X1205_REG_MOA1 0x0C +#define X1205_REG_DTA1 0x0B +#define X1205_REG_HRA1 0x0A +#define X1205_REG_MNA1 0x09 +#define X1205_REG_SCA1 0x08 +#define X1205_REG_Y2K0 0x07 +#define X1205_REG_DWA0 0x06 +#define X1205_REG_YRA0 0x05 +#define X1205_REG_MOA0 0x04 +#define X1205_REG_DTA0 0x03 +#define X1205_REG_HRA0 0x02 +#define X1205_REG_MNA0 0x01 +#define X1205_REG_SCA0 0x00 + +#define X1205_CCR_BASE 0x30 /* Base address of CCR */ +#define X1205_ALM0_BASE 0x00 /* Base address of ALARM0 */ + +#define X1205_SR_RTCF 0x01 /* Clock failure */ +#define X1205_SR_WEL 0x02 /* Write Enable Latch */ +#define X1205_SR_RWEL 0x04 /* Register Write Enable */ + +#define X1205_DTR_DTR0 0x01 +#define X1205_DTR_DTR1 0x02 +#define X1205_DTR_DTR2 0x04 + +#define X1205_HR_MIL 0x80 /* Set in ccr.hour for 24 hr mode */ + +/* Prototypes */ +static int x1205_attach(struct i2c_adapter *adapter); +static int x1205_detach(struct i2c_client *client); +static int x1205_probe(struct i2c_adapter *adapter, int address, int kind); + +static struct i2c_driver x1205_driver = { + .driver = { + .name = "x1205", + }, + .id = I2C_DRIVERID_X1205, + .attach_adapter = &x1205_attach, + .detach_client = &x1205_detach, +}; + +/* + * In the routines that deal directly with the x1205 hardware, we use + * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch + * Epoch is initialized as 2000. Time is set to UTC. + */ +static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm, + unsigned char reg_base) +{ + unsigned char dt_addr[2] = { 0, reg_base }; + + unsigned char buf[8]; + + struct i2c_msg msgs[] = { + { client->addr, 0, 2, dt_addr }, /* setup read ptr */ + { client->addr, I2C_M_RD, 8, buf }, /* read date */ + }; + + /* read date registers */ + if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) { + dev_err(&client->dev, "%s: read error\n", __FUNCTION__); + return -EIO; + } + + dev_dbg(&client->dev, + "%s: raw read data - sec=%02x, min=%02x, hr=%02x, " + "mday=%02x, mon=%02x, year=%02x, wday=%02x, y2k=%02x\n", + __FUNCTION__, + buf[0], buf[1], buf[2], buf[3], + buf[4], buf[5], buf[6], buf[7]); + + tm->tm_sec = BCD2BIN(buf[CCR_SEC]); + tm->tm_min = BCD2BIN(buf[CCR_MIN]); + tm->tm_hour = BCD2BIN(buf[CCR_HOUR] & 0x3F); /* hr is 0-23 */ + tm->tm_mday = BCD2BIN(buf[CCR_MDAY]); + tm->tm_mon = BCD2BIN(buf[CCR_MONTH]) - 1; /* mon is 0-11 */ + tm->tm_year = BCD2BIN(buf[CCR_YEAR]) + + (BCD2BIN(buf[CCR_Y2K]) * 100) - 1900; + tm->tm_wday = buf[CCR_WDAY]; + + dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, " + "mday=%d, mon=%d, year=%d, wday=%d\n", + __FUNCTION__, + tm->tm_sec, tm->tm_min, tm->tm_hour, + tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); + + return 0; +} + +static int x1205_get_status(struct i2c_client *client, unsigned char *sr) +{ + static unsigned char sr_addr[2] = { 0, X1205_REG_SR }; + + struct i2c_msg msgs[] = { + { client->addr, 0, 2, sr_addr }, /* setup read ptr */ + { client->addr, I2C_M_RD, 1, sr }, /* read status */ + }; + + /* read status register */ + if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) { + dev_err(&client->dev, "%s: read error\n", __FUNCTION__); + return -EIO; + } + + return 0; +} + +static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm, + int datetoo, u8 reg_base) +{ + int i, xfer; + unsigned char buf[8]; + + static const unsigned char wel[3] = { 0, X1205_REG_SR, + X1205_SR_WEL }; + + static const unsigned char rwel[3] = { 0, X1205_REG_SR, + X1205_SR_WEL | X1205_SR_RWEL }; + + static const unsigned char diswe[3] = { 0, X1205_REG_SR, 0 }; + + dev_dbg(&client->dev, + "%s: secs=%d, mins=%d, hours=%d\n", + __FUNCTION__, + tm->tm_sec, tm->tm_min, tm->tm_hour); + + buf[CCR_SEC] = BIN2BCD(tm->tm_sec); + buf[CCR_MIN] = BIN2BCD(tm->tm_min); + + /* set hour and 24hr bit */ + buf[CCR_HOUR] = BIN2BCD(tm->tm_hour) | X1205_HR_MIL; + + /* should we also set the date? */ + if (datetoo) { + dev_dbg(&client->dev, + "%s: mday=%d, mon=%d, year=%d, wday=%d\n", + __FUNCTION__, + tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); + + buf[CCR_MDAY] = BIN2BCD(tm->tm_mday); + + /* month, 1 - 12 */ + buf[CCR_MONTH] = BIN2BCD(tm->tm_mon + 1); + + /* year, since the rtc epoch*/ + buf[CCR_YEAR] = BIN2BCD(tm->tm_year % 100); + buf[CCR_WDAY] = tm->tm_wday & 0x07; + buf[CCR_Y2K] = BIN2BCD(tm->tm_year / 100); + } + + /* this sequence is required to unlock the chip */ + if ((xfer = i2c_master_send(client, wel, 3)) != 3) { + dev_err(&client->dev, "%s: wel - %d\n", __FUNCTION__, xfer); + return -EIO; + } + + if ((xfer = i2c_master_send(client, rwel, 3)) != 3) { + dev_err(&client->dev, "%s: rwel - %d\n", __FUNCTION__, xfer); + return -EIO; + } + + /* write register's data */ + for (i = 0; i < (datetoo ? 8 : 3); i++) { + unsigned char rdata[3] = { 0, reg_base + i, buf[i] }; + + xfer = i2c_master_send(client, rdata, 3); + if (xfer != 3) { + dev_err(&client->dev, + "%s: xfer=%d addr=%02x, data=%02x\n", + __FUNCTION__, + xfer, rdata[1], rdata[2]); + return -EIO; + } + }; + + /* disable further writes */ + if ((xfer = i2c_master_send(client, diswe, 3)) != 3) { + dev_err(&client->dev, "%s: diswe - %d\n", __FUNCTION__, xfer); + return -EIO; + } + + return 0; +} + +static int x1205_fix_osc(struct i2c_client *client) +{ + int err; + struct rtc_time tm; + + tm.tm_hour = tm.tm_min = tm.tm_sec = 0; + + if ((err = x1205_set_datetime(client, &tm, 0, X1205_CCR_BASE)) < 0) + dev_err(&client->dev, + "unable to restart the oscillator\n"); + + return err; +} + +static int x1205_get_dtrim(struct i2c_client *client, int *trim) +{ + unsigned char dtr; + static unsigned char dtr_addr[2] = { 0, X1205_REG_DTR }; + + struct i2c_msg msgs[] = { + { client->addr, 0, 2, dtr_addr }, /* setup read ptr */ + { client->addr, I2C_M_RD, 1, &dtr }, /* read dtr */ + }; + + /* read dtr register */ + if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) { + dev_err(&client->dev, "%s: read error\n", __FUNCTION__); + return -EIO; + } + + dev_dbg(&client->dev, "%s: raw dtr=%x\n", __FUNCTION__, dtr); + + *trim = 0; + + if (dtr & X1205_DTR_DTR0) + *trim += 20; + + if (dtr & X1205_DTR_DTR1) + *trim += 10; + + if (dtr & X1205_DTR_DTR2) + *trim = -*trim; + + return 0; +} + +static int x1205_get_atrim(struct i2c_client *client, int *trim) +{ + s8 atr; + static unsigned char atr_addr[2] = { 0, X1205_REG_ATR }; + + struct i2c_msg msgs[] = { + { client->addr, 0, 2, atr_addr }, /* setup read ptr */ + { client->addr, I2C_M_RD, 1, &atr }, /* read atr */ + }; + + /* read atr register */ + if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) { + dev_err(&client->dev, "%s: read error\n", __FUNCTION__); + return -EIO; + } + + dev_dbg(&client->dev, "%s: raw atr=%x\n", __FUNCTION__, atr); + + /* atr is a two's complement value on 6 bits, + * perform sign extension. The formula is + * Catr = (atr * 0.25pF) + 11.00pF. + */ + if (atr & 0x20) + atr |= 0xC0; + + dev_dbg(&client->dev, "%s: raw atr=%x (%d)\n", __FUNCTION__, atr, atr); + + *trim = (atr * 250) + 11000; + + dev_dbg(&client->dev, "%s: real=%d\n", __FUNCTION__, *trim); + + return 0; +} + +struct x1205_limit +{ + unsigned char reg, mask, min, max; +}; + +static int x1205_validate_client(struct i2c_client *client) +{ + int i, xfer; + + /* Probe array. We will read the register at the specified + * address and check if the given bits are zero. + */ + static const unsigned char probe_zero_pattern[] = { + /* register, mask */ + X1205_REG_SR, 0x18, + X1205_REG_DTR, 0xF8, + X1205_REG_ATR, 0xC0, + X1205_REG_INT, 0x18, + X1205_REG_0, 0xFF, + }; + + static const struct x1205_limit probe_limits_pattern[] = { + /* register, mask, min, max */ + { X1205_REG_Y2K, 0xFF, 19, 20 }, + { X1205_REG_DW, 0xFF, 0, 6 }, + { X1205_REG_YR, 0xFF, 0, 99 }, + { X1205_REG_MO, 0xFF, 0, 12 }, + { X1205_REG_DT, 0xFF, 0, 31 }, + { X1205_REG_HR, 0x7F, 0, 23 }, + { X1205_REG_MN, 0xFF, 0, 59 }, + { X1205_REG_SC, 0xFF, 0, 59 }, + { X1205_REG_Y2K1, 0xFF, 19, 20 }, + { X1205_REG_Y2K0, 0xFF, 19, 20 }, + }; + + /* check that registers have bits a 0 where expected */ + for (i = 0; i < ARRAY_SIZE(probe_zero_pattern); i += 2) { + unsigned char buf; + + unsigned char addr[2] = { 0, probe_zero_pattern[i] }; + + struct i2c_msg msgs[2] = { + { client->addr, 0, 2, addr }, + { client->addr, I2C_M_RD, 1, &buf }, + }; + + if ((xfer = i2c_transfer(client->adapter, msgs, 2)) != 2) { + dev_err(&client->adapter->dev, + "%s: could not read register %x\n", + __FUNCTION__, probe_zero_pattern[i]); + + return -EIO; + } + + if ((buf & probe_zero_pattern[i+1]) != 0) { + dev_err(&client->adapter->dev, + "%s: register=%02x, zero pattern=%d, value=%x\n", + __FUNCTION__, probe_zero_pattern[i], i, buf); + + return -ENODEV; + } + } + + /* check limits (only registers with bcd values) */ + for (i = 0; i < ARRAY_SIZE(probe_limits_pattern); i++) { + unsigned char reg, value; + + unsigned char addr[2] = { 0, probe_limits_pattern[i].reg }; + + struct i2c_msg msgs[2] = { + { client->addr, 0, 2, addr }, + { client->addr, I2C_M_RD, 1, ® }, + }; + + if ((xfer = i2c_transfer(client->adapter, msgs, 2)) != 2) { + dev_err(&client->adapter->dev, + "%s: could not read register %x\n", + __FUNCTION__, probe_limits_pattern[i].reg); + + return -EIO; + } + + value = BCD2BIN(reg & probe_limits_pattern[i].mask); + + if (value > probe_limits_pattern[i].max || + value < probe_limits_pattern[i].min) { + dev_dbg(&client->adapter->dev, + "%s: register=%x, lim pattern=%d, value=%d\n", + __FUNCTION__, probe_limits_pattern[i].reg, + i, value); + + return -ENODEV; + } + } + + return 0; +} + +static int x1205_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + return x1205_get_datetime(to_i2c_client(dev), + &alrm->time, X1205_ALM0_BASE); +} + +static int x1205_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + return x1205_set_datetime(to_i2c_client(dev), + &alrm->time, 1, X1205_ALM0_BASE); +} + +static int x1205_rtc_read_time(struct device *dev, struct rtc_time *tm) +{ + return x1205_get_datetime(to_i2c_client(dev), + tm, X1205_CCR_BASE); +} + +static int x1205_rtc_set_time(struct device *dev, struct rtc_time *tm) +{ + return x1205_set_datetime(to_i2c_client(dev), + tm, 1, X1205_CCR_BASE); +} + +static int x1205_rtc_proc(struct device *dev, struct seq_file *seq) +{ + int err, dtrim, atrim; + + seq_printf(seq, "24hr\t\t: yes\n"); + + if ((err = x1205_get_dtrim(to_i2c_client(dev), &dtrim)) == 0) + seq_printf(seq, "digital_trim\t: %d ppm\n", dtrim); + + if ((err = x1205_get_atrim(to_i2c_client(dev), &atrim)) == 0) + seq_printf(seq, "analog_trim\t: %d.%02d pF\n", + atrim / 1000, atrim % 1000); + return 0; +} + +static struct rtc_class_ops x1205_rtc_ops = { + .proc = x1205_rtc_proc, + .read_time = x1205_rtc_read_time, + .set_time = x1205_rtc_set_time, + .read_alarm = x1205_rtc_read_alarm, + .set_alarm = x1205_rtc_set_alarm, +}; + +static ssize_t x1205_sysfs_show_atrim(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int atrim; + + if (x1205_get_atrim(to_i2c_client(dev), &atrim) == 0) + return sprintf(buf, "%d.%02d pF\n", + atrim / 1000, atrim % 1000); + return 0; +} +static DEVICE_ATTR(atrim, S_IRUGO, x1205_sysfs_show_atrim, NULL); + +static ssize_t x1205_sysfs_show_dtrim(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int dtrim; + + if (x1205_get_dtrim(to_i2c_client(dev), &dtrim) == 0) + return sprintf(buf, "%d ppm\n", dtrim); + + return 0; +} +static DEVICE_ATTR(dtrim, S_IRUGO, x1205_sysfs_show_dtrim, NULL); + +static int x1205_attach(struct i2c_adapter *adapter) +{ + dev_dbg(&adapter->dev, "%s\n", __FUNCTION__); + return i2c_probe(adapter, &addr_data, x1205_probe); +} + +static int x1205_probe(struct i2c_adapter *adapter, int address, int kind) +{ + int err = 0; + unsigned char sr; + struct i2c_client *client; + struct rtc_device *rtc; + + dev_dbg(&adapter->dev, "%s\n", __FUNCTION__); + + if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) { + err = -ENODEV; + goto exit; + } + + if (!(client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL))) { + err = -ENOMEM; + goto exit; + } + + /* I2C client */ + client->addr = address; + client->driver = &x1205_driver; + client->adapter = adapter; + + strlcpy(client->name, x1205_driver.driver.name, I2C_NAME_SIZE); + + /* Verify the chip is really an X1205 */ + if (kind < 0) { + if (x1205_validate_client(client) < 0) { + err = -ENODEV; + goto exit_kfree; + } + } + + /* Inform the i2c layer */ + if ((err = i2c_attach_client(client))) + goto exit_kfree; + + dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n"); + + rtc = rtc_device_register(x1205_driver.driver.name, &client->dev, + &x1205_rtc_ops, THIS_MODULE); + + if (IS_ERR(rtc)) { + err = PTR_ERR(rtc); + dev_err(&client->dev, + "unable to register the class device\n"); + goto exit_detach; + } + + i2c_set_clientdata(client, rtc); + + /* Check for power failures and eventualy enable the osc */ + if ((err = x1205_get_status(client, &sr)) == 0) { + if (sr & X1205_SR_RTCF) { + dev_err(&client->dev, + "power failure detected, " + "please set the clock\n"); + udelay(50); + x1205_fix_osc(client); + } + } + else + dev_err(&client->dev, "couldn't read status\n"); + + device_create_file(&client->dev, &dev_attr_atrim); + device_create_file(&client->dev, &dev_attr_dtrim); + + return 0; + +exit_detach: + i2c_detach_client(client); + +exit_kfree: + kfree(client); + +exit: + return err; +} + +static int x1205_detach(struct i2c_client *client) +{ + int err; + struct rtc_device *rtc = i2c_get_clientdata(client); + + dev_dbg(&client->dev, "%s\n", __FUNCTION__); + + if (rtc) + rtc_device_unregister(rtc); + + if ((err = i2c_detach_client(client))) + return err; + + kfree(client); + + return 0; +} + +static int __init x1205_init(void) +{ + return i2c_add_driver(&x1205_driver); +} + +static void __exit x1205_exit(void) +{ + i2c_del_driver(&x1205_driver); +} + +MODULE_AUTHOR( + "Karen Spearel , " + "Alessandro Zummo "); +MODULE_DESCRIPTION("Xicor/Intersil X1205 RTC driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + +module_init(x1205_init); +module_exit(x1205_exit);