From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Fri, 10 Oct 2008 18:05:12 +0000 (+0400)
Subject: powerpc/83xx: add NAND support for the MPC8360E-RDK boards
X-Git-Tag: v2.6.28-rc1~569^2~10^2~1
X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=1fb25be1e74498d389e4de819a6d1b174d6ccb7c;p=linux-2.6-omap-h63xx.git

powerpc/83xx: add NAND support for the MPC8360E-RDK boards

The StMicro NAND chip (512Mbit, 64MB) is connected to the local bus,
the first local bus' user-programmable machine is configured by the
firmware to work with NAND chips.

QE GPIO pin is used to poll the NAND's Ready-Not-Busy signal.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---

diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts
index f747747e531..decadf3d9e9 100644
--- a/arch/powerpc/boot/dts/mpc836x_rdk.dts
+++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts
@@ -387,6 +387,18 @@
 			device-width = <1>;
 		};
 
+		upm@1,0 {
+			compatible = "fsl,upm-nand";
+			reg = <1 0 1>;
+			fsl,upm-addr-offset = <16>;
+			fsl,upm-cmd-offset = <8>;
+			gpios = <&qe_pio_e 18 0>;
+
+			flash {
+				compatible = "stm,nand512-a";
+			};
+		};
+
 		display@2,0 {
 			device_type = "display";
 			compatible = "fujitsu,MB86277", "fujitsu,mint";