From: Manfred Spraul Date: Sat, 6 Aug 2005 21:47:55 +0000 (+0200) Subject: [PATCH] forcedeth: Initialize link settings in every nv_open() X-Git-Tag: v2.6.14-rc1~1055^2~15 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=1b1b3c9b6d346d441a99e2de0b34f3ba93963ad8;p=linux-2.6-omap-h63xx.git [PATCH] forcedeth: Initialize link settings in every nv_open() RĂ¼diger found a bug in nv_open that explains some of the reports with duplex mismatches: nv_open calls nv_update_link_speed for initializing the hardware link speed registers. If current link setting matches the values in np->linkspeed and np->duplex, then the function does nothing. Usually, doing nothing is the right thing, but not in nv_open: During nv_open, the registers must be initialized because the nic was reset. The attached patch fixes that by setting np->linkspeed to an invalid value before calling nv_update_link_speed from nv_open. Signed-Off-By: Manfred Spraul Signed-off-by: Jeff Garzik --- diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index f165ae97398..7d93948aec8 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -93,6 +93,8 @@ * 0.40: 19 Jul 2005: Add support for mac address change. * 0.41: 30 Jul 2005: Write back original MAC in nv_close instead * of nv_remove + * 0.42: 06 Aug 2005: Fix lack of link speed initialization + * in the second (and later) nv_open call * * Known bugs: * We suspect that on some hardware no TX done interrupts are generated. @@ -2178,6 +2180,9 @@ static int nv_open(struct net_device *dev) writel(NVREG_MIISTAT_MASK, base + NvRegMIIStatus); dprintk(KERN_INFO "startup: got 0x%08x.\n", miistat); } + /* set linkspeed to invalid value, thus force nv_update_linkspeed + * to init hw */ + np->linkspeed = 0; ret = nv_update_linkspeed(dev); nv_start_rx(dev); nv_start_tx(dev);