From: Vikram Pandita Date: Tue, 7 Apr 2009 22:37:51 +0000 (-0700) Subject: USB: Add OMAP EHCI glue layer X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=1abccbf41c01c6e69887363cb8053229288137fd;p=linux-2.6-omap-h63xx.git USB: Add OMAP EHCI glue layer Add OMAP EHCI glue layer Signed-off-by: Vikram Pandita Acked-by: Kamat, Nishant --- diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index c6c816b7ecb..7ba50d2135c 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -57,6 +57,7 @@ config USB_ARCH_HAS_EHCI default y if PPC_83xx default y if SOC_AU1200 default y if ARCH_IXP4XX + default y if ARCH_OMAP34XX default PCI # ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface. diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 845479f7c70..1091358d12b 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -38,6 +38,25 @@ config USB_EHCI_HCD To compile this driver as a module, choose M here: the module will be called ehci-hcd. +choice + prompt "PHY/TLL mode" + depends on USB_EHCI_HCD && EXPERIMENTAL && ARCH_OMAP34XX + ---help--- + Choose PHY or TLL mode of operation + +config OMAP_EHCI_PHY_MODE + bool "PHY mode: ISP1504 on Port1/2 (NEW 3430ES2.0)" + depends on USB_EHCI_HCD && EXPERIMENTAL && ARCH_OMAP34XX + ---help--- + EHCI PHY mode. Port1 and Port2 are connected to ISP1504 transcievers + +config OMAP_EHCI_TLL_MODE + bool "TLL mode: (EXPERIMENTAL)" + depends on USB_EHCI_HCD && EXPERIMENTAL && ARCH_OMAP34XX + ---help--- + OMAP EHCI controller has TLL mode of operation for all 3 ports. + Use this mode when no transciever is present +endchoice config USB_EHCI_ROOT_HUB_TT bool "Root Hub Transaction Translators" diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index c637207a1c8..efca884e742 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -1052,6 +1052,11 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ehci_hcd_au1xxx_driver #endif +#ifdef CONFIG_ARCH_OMAP34XX +#include "ehci-omap.c" +#define PLATFORM_DRIVER ehci_hcd_omap_driver +#endif + #ifdef CONFIG_PPC_PS3 #include "ehci-ps3.c" #define PS3_SYSTEM_BUS_DRIVER ps3_ehci_driver diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c new file mode 100644 index 00000000000..9bf3815dc45 --- /dev/null +++ b/drivers/usb/host/ehci-omap.c @@ -0,0 +1,578 @@ +/* + * ehci-omap.c - driver for USBHOST on OMAP 34xx processor + * + * Bus Glue for OMAP34xx USBHOST 3 port EHCI controller + * Tested on OMAP3430 ES2.0 SDP + * + * Copyright (C) 2007-2008 Texas Instruments, Inc. + * Author: Vikram Pandita + * + * Based on "ehci-fsl.c" and "ehci-au1xxx.c" ehci glue layers + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include +#include +#include + +#include "ehci-omap.h" + + +#ifdef CONFIG_OMAP_EHCI_PHY_MODE +/* EHCI connected to External PHY */ + +/* External USB connectivity board: 750-2083-001 + * Connected to OMAP3430 SDP + * The board has Port1 and Port2 connected to ISP1504 in 12-pin ULPI mode + */ + +/* ISSUE1: + * ISP1504 for input clocking mode needs special reset handling + * Hold the PHY in reset by asserting RESET_N signal + * Then start the 60Mhz clock input to PHY + * Release the reset after a delay - + * to get the PHY state machine in working state + */ +#define EXTERNAL_PHY_RESET +#define EXT_PHY_RESET_GPIO_PORT1 (57) +#define EXT_PHY_RESET_GPIO_PORT2 (61) +#define EXT_PHY_RESET_DELAY (10) + +/* ISSUE2: + * USBHOST supports External charge pump PHYs only + * Use the VBUS from Port1 to power VBUS of Port2 externally + * So use Port2 as the working ULPI port + */ +#define VBUS_INTERNAL_CHARGEPUMP_HACK + +#endif /* CONFIG_OMAP_EHCI_PHY_MODE */ + +/*-------------------------------------------------------------------------*/ + +/* Define USBHOST clocks for clock management */ +struct ehci_omap_clock_defs { + struct clk *usbhost_ick_clk; + struct clk *usbhost2_120m_fck_clk; + struct clk *usbhost1_48m_fck_clk; + struct clk *usbtll_fck_clk; + struct clk *usbtll_ick_clk; +}; + +/* Clock names as per clock framework: May change so keep as #defs */ +#define USBHOST_ICKL "usbhost_ick" +#define USBHOST_120M_FCLK "usbhost_120m_fck" +#define USBHOST_48M_FCLK "usbhost_48m_fck" +#define USBHOST_TLL_ICKL "usbtll_ick" +#define USBHOST_TLL_FCLK "usbtll_fck" +/*-------------------------------------------------------------------------*/ + + +#ifndef CONFIG_OMAP_EHCI_PHY_MODE + +static void omap_usb_utmi_init(struct usb_hcd *hcd, u8 tll_channel_mask) +{ + int i; + + /* Use UTMI Ports of TLL */ + omap_writel((1 << OMAP_UHH_HOSTCONFIG_ULPI_BYPASS_SHIFT)| + (1<self.controller, "\nEntered UTMI MODE: success\n"); + + /* Program the 3 TLL channels upfront */ + + for (i = 0; i < OMAP_TLL_CHANNEL_COUNT; i++) { + + /* Disable AutoIdle */ + omap_writel(omap_readl(OMAP_TLL_CHANNEL_CONF(i)) & + ~(1<self.controller, "\nULPI_SCRATCH_REG[ch=%d]" + "= 0x%02x\n", + i+1, omap_readb(OMAP_TLL_ULPI_SCRATCH_REGISTER(i))); + } +} + +#else +# define omap_usb_utmi_init(x, y) 0 +#endif + + +/* omap_start_ehc + * - Start the TI USBHOST controller + */ +static int omap_start_ehc(struct platform_device *dev, struct usb_hcd *hcd) +{ + struct ehci_omap_clock_defs *ehci_clocks; + + dev_dbg(hcd->self.controller, "starting TI EHCI USB Controller\n"); + + ehci_clocks = (struct ehci_omap_clock_defs *)( + ((char *)hcd_to_ehci(hcd)) + + sizeof(struct ehci_hcd)); + + /* Start DPLL5 Programming: + * Clock Framework is not doing this now: + * This will be done in clock framework later + */ + /* Enable DPLL 5 : Based on Input of 13Mhz*/ + cm_write_mod_reg((12 << OMAP3430ES2_PERIPH2_DPLL_DIV_SHIFT)| + (120 << OMAP3430ES2_PERIPH2_DPLL_MULT_SHIFT), + PLL_MOD, OMAP3430ES2_CM_CLKSEL4); + + cm_write_mod_reg(1 << OMAP3430ES2_DIV_120M_SHIFT, + PLL_MOD, OMAP3430ES2_CM_CLKSEL5); + + cm_write_mod_reg((7 << OMAP3430ES2_PERIPH2_DPLL_FREQSEL_SHIFT) | + (7 << OMAP3430ES2_EN_PERIPH2_DPLL_SHIFT), + PLL_MOD, OMAP3430ES2_CM_CLKEN2); + + while (!(cm_read_mod_reg(PLL_MOD, CM_IDLEST2) & + OMAP3430ES2_ST_PERIPH2_CLK_MASK)) + dev_dbg(hcd->self.controller, + "idlest2 = 0x%x\n", + cm_read_mod_reg(PLL_MOD, CM_IDLEST2)); + /* End DPLL5 programming */ + + + /* PRCM settings for USBHOST: + * Interface clk un-related to domain transition + */ + cm_write_mod_reg(0 << OMAP3430ES2_AUTO_USBHOST_SHIFT, + OMAP3430ES2_USBHOST_MOD, CM_AUTOIDLE); + + /* Disable sleep dependency with MPU and IVA */ + cm_write_mod_reg((0 << OMAP3430ES2_EN_MPU_SHIFT) | + (0 << OMAP3430ES2_EN_IVA2_SHIFT), + OMAP3430ES2_USBHOST_MOD, OMAP3430_CM_SLEEPDEP); + + /* Disable Automatic transition of clock */ + cm_write_mod_reg(0 << OMAP3430ES2_CLKTRCTRL_USBHOST_SHIFT, + OMAP3430ES2_USBHOST_MOD, CM_CLKSTCTRL); + + /* Enable Clocks for USBHOST */ + ehci_clocks->usbhost_ick_clk = clk_get(&dev->dev, + USBHOST_ICKL); + if (IS_ERR(ehci_clocks->usbhost_ick_clk)) + return PTR_ERR(ehci_clocks->usbhost_ick_clk); + clk_enable(ehci_clocks->usbhost_ick_clk); + + + ehci_clocks->usbhost2_120m_fck_clk = clk_get(&dev->dev, + USBHOST_120M_FCLK); + if (IS_ERR(ehci_clocks->usbhost2_120m_fck_clk)) + return PTR_ERR(ehci_clocks->usbhost2_120m_fck_clk); + clk_enable(ehci_clocks->usbhost2_120m_fck_clk); + + ehci_clocks->usbhost1_48m_fck_clk = clk_get(&dev->dev, + USBHOST_48M_FCLK); + if (IS_ERR(ehci_clocks->usbhost1_48m_fck_clk)) + return PTR_ERR(ehci_clocks->usbhost1_48m_fck_clk); + clk_enable(ehci_clocks->usbhost1_48m_fck_clk); + + +#ifdef EXTERNAL_PHY_RESET + /* Refer: ISSUE1 */ + gpio_request(EXT_PHY_RESET_GPIO_PORT1, "USB1 PHY reset"); + gpio_direction_output(EXT_PHY_RESET_GPIO_PORT1, 0); + gpio_request(EXT_PHY_RESET_GPIO_PORT2, "USB2 PHY reset"); + gpio_direction_output(EXT_PHY_RESET_GPIO_PORT2, 0); + /* Hold the PHY in RESET for enough time till DIR is high */ + udelay(EXT_PHY_RESET_DELAY); +#endif + + /* Configure TLL for 60Mhz clk for ULPI */ + ehci_clocks->usbtll_fck_clk = clk_get(&dev->dev, USBHOST_TLL_FCLK); + if (IS_ERR(ehci_clocks->usbtll_fck_clk)) + return PTR_ERR(ehci_clocks->usbtll_fck_clk); + clk_enable(ehci_clocks->usbtll_fck_clk); + + ehci_clocks->usbtll_ick_clk = clk_get(&dev->dev, USBHOST_TLL_ICKL); + if (IS_ERR(ehci_clocks->usbtll_ick_clk)) + return PTR_ERR(ehci_clocks->usbtll_ick_clk); + clk_enable(ehci_clocks->usbtll_ick_clk); + + /* Disable Auto Idle of USBTLL */ + cm_write_mod_reg((0 << OMAP3430ES2_AUTO_USBTLL_SHIFT), + CORE_MOD, CM_AUTOIDLE3); + + /* Wait for TLL to be Active */ + while ((cm_read_mod_reg(CORE_MOD, OMAP2430_CM_IDLEST3) + & (1 << OMAP3430ES2_ST_USBTLL_SHIFT))) + cpu_relax(); + + /* perform TLL soft reset, and wait until reset is complete */ + omap_writel(1 << OMAP_USBTLL_SYSCONFIG_SOFTRESET_SHIFT, + OMAP_USBTLL_SYSCONFIG); + /* Wait for TLL reset to complete */ + while (!(omap_readl(OMAP_USBTLL_SYSSTATUS) + & (1 << OMAP_USBTLL_SYSSTATUS_RESETDONE_SHIFT))) + cpu_relax(); + + dev_dbg(hcd->self.controller, "TLL RESET DONE\n"); + + /* (1<<3) = no idle mode only for initial debugging */ + omap_writel((1 << OMAP_USBTLL_SYSCONFIG_ENAWAKEUP_SHIFT) | + (1 << OMAP_USBTLL_SYSCONFIG_SIDLEMODE_SHIFT) | + (1 << OMAP_USBTLL_SYSCONFIG_CACTIVITY_SHIFT), + OMAP_USBTLL_SYSCONFIG); + + + /* Put UHH in NoIdle/NoStandby mode */ + omap_writel((0 << OMAP_UHH_SYSCONFIG_AUTOIDLE_SHIFT) | + (1 << OMAP_UHH_SYSCONFIG_ENAWAKEUP_SHIFT) | + (1 << OMAP_UHH_SYSCONFIG_SIDLEMODE_SHIFT) | + (1 << OMAP_UHH_SYSCONFIG_CACTIVITY_SHIFT) | + (1 << OMAP_UHH_SYSCONFIG_MIDLEMODE_SHIFT), + OMAP_UHH_SYSCONFIG); + +#ifdef CONFIG_OMAP_EHCI_PHY_MODE + /* Bypass the TLL module for PHY mode operation */ + omap_writel((0 << OMAP_UHH_HOSTCONFIG_ULPI_BYPASS_SHIFT)| + (1<self.controller, "Entered ULPI PHY MODE: success\n"); + +#else + /* Enable UTMI mode for all 3 TLL channels */ + omap_usb_utmi_init(hcd, + OMAP_TLL_CHANNEL_1_EN_MASK | + OMAP_TLL_CHANNEL_2_EN_MASK | + OMAP_TLL_CHANNEL_3_EN_MASK + ); +#endif + +#ifdef EXTERNAL_PHY_RESET + /* Refer ISSUE1: + * Hold the PHY in RESET for enough time till PHY is settled and ready + */ + udelay(EXT_PHY_RESET_DELAY); + gpio_set_value(EXT_PHY_RESET_GPIO_PORT1, 1); + gpio_set_value(EXT_PHY_RESET_GPIO_PORT2, 1); +#endif + +#ifdef VBUS_INTERNAL_CHARGEPUMP_HACK + /* Refer ISSUE2: LINK assumes external charge pump */ + + /* use Port1 VBUS to charge externally Port2: + * So for PHY mode operation use Port2 only + */ + omap_writel((0xA << EHCI_INSNREG05_ULPI_REGADD_SHIFT) |/* OTG ctrl reg*/ + (2 << EHCI_INSNREG05_ULPI_OPSEL_SHIFT) |/* Write */ + (1 << EHCI_INSNREG05_ULPI_PORTSEL_SHIFT) |/* Port1 */ + (1 << EHCI_INSNREG05_ULPI_CONTROL_SHIFT) |/* Start */ + (0x26), + EHCI_INSNREG05_ULPI); + + while (!(omap_readl(EHCI_INSNREG05_ULPI) + & (1<self.controller, "stopping TI EHCI USB Controller\n"); + + /* Reset OMAP modules for insmod/rmmod to work */ + omap_writel((1<<1), OMAP_UHH_SYSCONFIG); + while (!(omap_readl(OMAP_UHH_SYSSTATUS) & (1<<0))) + cpu_relax(); + while (!(omap_readl(OMAP_UHH_SYSSTATUS) & (1<<1))) + cpu_relax(); + while (!(omap_readl(OMAP_UHH_SYSSTATUS) & (1<<2))) + cpu_relax(); + dev_dbg(hcd->self.controller, + "UHH RESET DONE OMAP_UHH_SYSSTATUS %x !!\n", + omap_readl(OMAP_UHH_SYSSTATUS)); + + omap_writel((1<<1), OMAP_USBTLL_SYSCONFIG); + while (!(omap_readl(OMAP_USBTLL_SYSSTATUS) & (1<<0))) + cpu_relax(); + dev_dbg(hcd->self.controller, "TLL RESET DONE\n"); + + if (ehci_clocks->usbtll_fck_clk != NULL) { + clk_disable(ehci_clocks->usbtll_fck_clk); + clk_put(ehci_clocks->usbtll_fck_clk); + ehci_clocks->usbtll_fck_clk = NULL; + } + + if (ehci_clocks->usbhost_ick_clk != NULL) { + clk_disable(ehci_clocks->usbhost_ick_clk); + clk_put(ehci_clocks->usbhost_ick_clk); + ehci_clocks->usbhost_ick_clk = NULL; + } + + if (ehci_clocks->usbhost1_48m_fck_clk != NULL) { + clk_disable(ehci_clocks->usbhost1_48m_fck_clk); + clk_put(ehci_clocks->usbhost1_48m_fck_clk); + ehci_clocks->usbhost1_48m_fck_clk = NULL; + } + + if (ehci_clocks->usbhost2_120m_fck_clk != NULL) { + clk_disable(ehci_clocks->usbhost2_120m_fck_clk); + clk_put(ehci_clocks->usbhost2_120m_fck_clk); + ehci_clocks->usbhost2_120m_fck_clk = NULL; + } + + if (ehci_clocks->usbtll_ick_clk != NULL) { + clk_disable(ehci_clocks->usbtll_ick_clk); + clk_put(ehci_clocks->usbtll_ick_clk); + ehci_clocks->usbtll_ick_clk = NULL; + } + + +#ifdef EXTERNAL_PHY_RESET + gpio_free(EXT_PHY_RESET_GPIO_PORT1); + gpio_free(EXT_PHY_RESET_GPIO_PORT2); +#endif + + dev_dbg(hcd->self.controller, + "Clock to USB host has been disabled\n"); +} + +static const struct hc_driver ehci_omap_hc_driver; + +/*-------------------------------------------------------------------------*/ +/* configure so an HC device and id are always provided */ +/* always called with process context; sleeping is OK */ + +/** + * ehci_hcd_omap_drv_probe - initialize TI-based HCDs + * Context: !in_interrupt() + * + * Allocates basic resources for this USB host controller, and + * then invokes the start() method for the HCD associated with it + * through the hotplug entry's driver_data. + * + */ +static int ehci_hcd_omap_drv_probe(struct platform_device *dev) +{ + int retval = 0; + struct usb_hcd *hcd; + struct ehci_hcd *ehci; + + dev_dbg(&dev->dev, "ehci_hcd_omap_drv_probe()\n"); + + if (usb_disabled()) + return -ENODEV; + + if (dev->resource[1].flags != IORESOURCE_IRQ) { + dev_dbg(&dev->dev, "resource[1] is not IORESOURCE_IRQ\n"); + retval = -ENOMEM; + } + + hcd = usb_create_hcd(&ehci_omap_hc_driver, &dev->dev, + dev_name(&dev->dev)); + if (!hcd) + return -ENOMEM; + + retval = omap_start_ehc(dev, hcd); + if (retval) + return retval; + + hcd->rsrc_start = 0; + hcd->rsrc_len = 0; + hcd->rsrc_start = dev->resource[0].start; + hcd->rsrc_len = dev->resource[0].end - dev->resource[0].start + 1; + + hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); + if (!hcd->regs) { + dev_err(&dev->dev, "ioremap failed\n"); + return -ENOMEM; + } + + ehci = hcd_to_ehci(hcd); + ehci->caps = hcd->regs; + + ehci->sbrn = 0x20; + + ehci->regs = hcd->regs + HC_LENGTH(readl(&ehci->caps->hc_capbase)); + /* cache this readonly data; minimize chip reads */ + ehci->hcs_params = readl(&ehci->caps->hcs_params); + + /* SET 1 micro-frame Interrupt interval */ + writel(readl(&ehci->regs->command) | (1<<16), &ehci->regs->command); + + retval = usb_add_hcd(hcd, dev->resource[1].start, + IRQF_DISABLED | IRQF_SHARED); + if (retval == 0) + return retval; + + dev_dbg(hcd->self.controller, "ERR: add_hcd\n"); + omap_stop_ehc(dev, hcd); + iounmap(hcd->regs); + usb_put_hcd(hcd); + + return retval; +} + +/*-------------------------------------------------------------------------*/ + +/* may be called without controller electrically present */ +/* may be called with controller, bus, and devices active */ + +/** + * ehci_hcd_omap_drv_remove - shutdown processing for EHCI HCDs + * @dev: USB Host Controller being removed + * Context: !in_interrupt() + * + * Reverses the effect of usb_ehci_hcd_omap_probe(), first invoking + * the HCD's stop() method. It is always called from a thread + * context, normally "rmmod", "apmd", or something similar. + * + */ +static int ehci_hcd_omap_drv_remove(struct platform_device *dev) +{ + struct usb_hcd *hcd = platform_get_drvdata(dev); + + dev_dbg(&dev->dev, "ehci_hcd_omap_drv_remove()\n"); + + iounmap(hcd->regs); + usb_remove_hcd(hcd); + usb_put_hcd(hcd); + omap_stop_ehc(dev, hcd); + + return 0; +} + +/*-------------------------------------------------------------------------*/ +#ifdef CONFIG_PM +static int omap_ehci_bus_suspend(struct usb_hcd *hcd) +{ + return ehci_bus_suspend(hcd); +} + +static int omap_ehci_bus_resume(struct usb_hcd *hcd) +{ + return ehci_bus_resume(hcd); +} +#endif +/*-------------------------------------------------------------------------*/ + +static const struct hc_driver ehci_omap_hc_driver = { + .description = hcd_name, + .product_desc = "OMAP-EHCI Host Controller", + .hcd_priv_size = sizeof(struct ehci_hcd) + + sizeof(struct ehci_omap_clock_defs), + + /* + * generic hardware linkage + */ + .irq = ehci_irq, + .flags = HCD_MEMORY | HCD_USB2, + + /* + * basic lifecycle operations + */ + .reset = ehci_init, + .start = ehci_run, + .stop = ehci_stop, + .shutdown = ehci_shutdown, + + /* + * managing i/o requests and associated device resources + */ + .urb_enqueue = ehci_urb_enqueue, + .urb_dequeue = ehci_urb_dequeue, + .endpoint_disable = ehci_endpoint_disable, + + /* + * scheduling support + */ + .get_frame_number = ehci_get_frame, + + /* + * root hub support + */ + .hub_status_data = ehci_hub_status_data, + .hub_control = ehci_hub_control, +#ifdef CONFIG_PM + .bus_suspend = omap_ehci_bus_suspend, + .bus_resume = omap_ehci_bus_resume, +#endif +}; + +/*-------------------------------------------------------------------------*/ +MODULE_ALIAS("platform:omap-ehci"); +static struct platform_driver ehci_hcd_omap_driver = { + .probe = ehci_hcd_omap_drv_probe, + .remove = ehci_hcd_omap_drv_remove, + .shutdown = usb_hcd_platform_shutdown, + /*.suspend = ehci_hcd_omap_drv_suspend, */ + /*.resume = ehci_hcd_omap_drv_resume, */ + .driver = { + .name = "ehci-omap", + .bus = &platform_bus_type + } +}; diff --git a/drivers/usb/host/ehci-omap.h b/drivers/usb/host/ehci-omap.h new file mode 100644 index 00000000000..9e4378f6bbb --- /dev/null +++ b/drivers/usb/host/ehci-omap.h @@ -0,0 +1,125 @@ +/* + * ehci-omap.h - register definitions for USBHOST in OMAP 34xx + * + * Copyright (C) 2007-2008 Texas Instruments, Inc. + * Author: Vikram Pandita + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __EHCI_OMAP_H +#define __EHCI_OMAP_H + +#include +#include "../../../arch/arm/mach-omap2/cm.h" +#include "../../../arch/arm/mach-omap2/cm-regbits-34xx.h" + +/* + * OMAP USBHOST Register addresses: PHYSICAL ADDRESSES + * Use omap_readl()/omap_writel() functions + */ + +/* USBHOST: TLL, UUH, OHCI, EHCI */ +#define OMAP_USBHOST_BASE (L4_34XX_BASE + 0x60000) + +/* TLL Register Set */ +#define OMAP_USBHOST_TLL_BASE (OMAP_USBHOST_BASE + 0x2000) +#define OMAP_USBTLL_REVISION (OMAP_USBHOST_TLL_BASE + 0x00) +#define OMAP_USBTLL_SYSCONFIG (OMAP_USBHOST_TLL_BASE + 0x10) + #define OMAP_USBTLL_SYSCONFIG_CACTIVITY_SHIFT 8 + #define OMAP_USBTLL_SYSCONFIG_SIDLEMODE_SHIFT 3 + #define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP_SHIFT 2 + #define OMAP_USBTLL_SYSCONFIG_SOFTRESET_SHIFT 1 + #define OMAP_USBTLL_SYSCONFIG_AUTOIDLE_SHIFT 0 +#define OMAP_USBTLL_SYSSTATUS (OMAP_USBHOST_TLL_BASE + 0x14) + #define OMAP_USBTLL_SYSSTATUS_RESETDONE_SHIFT 0 +#define OMAP_USBTLL_IRQSTATUS (OMAP_USBHOST_TLL_BASE + 0x18) +#define OMAP_USBTLL_IRQENABLE (OMAP_USBHOST_TLL_BASE + 0x1C) + +#define OMAP_TLL_SHARED_CONF (OMAP_USBHOST_TLL_BASE + 0x30) + #define OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN_SHFT 6 + #define OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN_SHIFT 5 + #define OMAP_TLL_SHARED_CONF_USB_DIVRATION_SHIFT 2 + #define OMAP_TLL_SHARED_CONF_FCLK_REQ_SHIFT 1 + #define OMAP_TLL_SHARED_CONF_FCLK_IS_ON_SHIFT 0 + +#define OMAP_TLL_CHANNEL_CONF(num)\ + (OMAP_USBHOST_TLL_BASE + (0x040 + 0x004 * num)) + #define OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF_SHIFT 11 + #define OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE_SHIFT 10 + #define OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE_SHIFT 9 + #define OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE_SHIFT 8 + #define OMAP_TLL_CHANNEL_CONF_CHANEN_SHIFT 0 + +#define OMAP_TLL_ULPI_FUNCTION_CTRL(num)\ + (OMAP_USBHOST_TLL_BASE + (0x804 + 0x100 * num)) +#define OMAP_TLL_ULPI_INTERFACE_CTRL(num)\ + (OMAP_USBHOST_TLL_BASE + (0x807 + 0x100 * num)) +#define OMAP_TLL_ULPI_OTG_CTRL(num)\ + (OMAP_USBHOST_TLL_BASE + (0x80A + 0x100 * num)) +#define OMAP_TLL_ULPI_INT_EN_RISE(num)\ + (OMAP_USBHOST_TLL_BASE + (0x80D + 0x100 * num)) +#define OMAP_TLL_ULPI_INT_EN_FALL(num)\ + (OMAP_USBHOST_TLL_BASE + (0x810 + 0x100 * num)) +#define OMAP_TLL_ULPI_INT_STATUS(num)\ + (OMAP_USBHOST_TLL_BASE + (0x813 + 0x100 * num)) +#define OMAP_TLL_ULPI_INT_LATCH(num)\ + (OMAP_USBHOST_TLL_BASE + (0x814 + 0x100 * num)) +#define OMAP_TLL_ULPI_DEBUG(num)\ + (OMAP_USBHOST_TLL_BASE + (0x815 + 0x100 * num)) +#define OMAP_TLL_ULPI_SCRATCH_REGISTER(num)\ + (OMAP_USBHOST_TLL_BASE + (0x816 + 0x100 * num)) + +#define OMAP_TLL_CHANNEL_COUNT 3 + #define OMAP_TLL_CHANNEL_1_EN_MASK 1 + #define OMAP_TLL_CHANNEL_2_EN_MASK 2 + #define OMAP_TLL_CHANNEL_3_EN_MASK 4 + +/* UHH Register Set */ +#define OMAP_USBHOST_UHH_BASE (OMAP_USBHOST_BASE + 0x4000) +#define OMAP_UHH_REVISION (OMAP_USBHOST_UHH_BASE + 0x00) +#define OMAP_UHH_SYSCONFIG (OMAP_USBHOST_UHH_BASE + 0x10) + #define OMAP_UHH_SYSCONFIG_MIDLEMODE_SHIFT 12 + #define OMAP_UHH_SYSCONFIG_CACTIVITY_SHIFT 8 + #define OMAP_UHH_SYSCONFIG_SIDLEMODE_SHIFT 3 + #define OMAP_UHH_SYSCONFIG_ENAWAKEUP_SHIFT 2 + #define OMAP_UHH_SYSCONFIG_SOFTRESET_SHIFT 1 + #define OMAP_UHH_SYSCONFIG_AUTOIDLE_SHIFT 0 + +#define OMAP_UHH_SYSSTATUS (OMAP_USBHOST_UHH_BASE + 0x14) +#define OMAP_UHH_HOSTCONFIG (OMAP_USBHOST_UHH_BASE + 0x40) + #define OMAP_UHH_HOSTCONFIG_ULPI_BYPASS_SHIFT 0 + #define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN_SHIFT 2 + #define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN_SHIFT 3 + #define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN_SHIFT 4 + #define OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN_SHIFT 5 + +#define OMAP_UHH_DEBUG_CSR (OMAP_USBHOST_UHH_BASE + 0x44) + +/* EHCI Register Set */ +#define OMAP_USBHOST_EHCI_BASE (OMAP_USBHOST_BASE + 0x4800) +#define EHCI_INSNREG05_ULPI (OMAP_USBHOST_EHCI_BASE + 0xA4) + #define EHCI_INSNREG05_ULPI_CONTROL_SHIFT 31 + #define EHCI_INSNREG05_ULPI_PORTSEL_SHIFT 24 + #define EHCI_INSNREG05_ULPI_OPSEL_SHIFT 22 + #define EHCI_INSNREG05_ULPI_REGADD_SHIFT 16 + #define EHCI_INSNREG05_ULPI_EXTREGADD_SHIFT 8 + #define EHCI_INSNREG05_ULPI_WRDATA_SHIFT 0 + +/* OHCI Register Set */ +#define OMAP_USBHOST_OHCI_BASE (OMAP_USBHOST_BASE + 0x4400) + +#endif/* __EHCI_OMAP_H*/