From: Greg Kroah-Hartman Date: Wed, 20 Aug 2008 23:56:34 +0000 (-0700) Subject: USB: remove use of err() in drivers/usb/serial X-Git-Tag: v2.6.28-rc1~254^2~4 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=194343d9364ea07c9f27c4505380a15a905e8a24;p=linux-2.6-omap-h63xx.git USB: remove use of err() in drivers/usb/serial err() is going away, so switch to dev_err() or printk() if it's really needed. Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c index 99fb7dc59c4..537f953bd7f 100644 --- a/drivers/usb/serial/aircable.c +++ b/drivers/usb/serial/aircable.c @@ -220,8 +220,8 @@ static void aircable_send(struct usb_serial_port *port) buf = kzalloc(count + HCI_HEADER_LENGTH, GFP_ATOMIC); if (!buf) { - err("%s- kzalloc(%d) failed.", __func__, - count + HCI_HEADER_LENGTH); + dev_err(&port->dev, "%s- kzalloc(%d) failed.\n", + __func__, count + HCI_HEADER_LENGTH); return; } @@ -276,7 +276,7 @@ static void aircable_read(struct work_struct *work) if (!tty) { schedule_work(&priv->rx_work); - err("%s - No tty available", __func__); + dev_err(&port->dev, "%s - No tty available\n", __func__); return ; } @@ -336,7 +336,7 @@ static int aircable_attach(struct usb_serial *serial) priv = kzalloc(sizeof(struct aircable_private), GFP_KERNEL); if (!priv) { - err("%s- kmalloc(%Zd) failed.", __func__, + dev_err(&port->dev, "%s- kmalloc(%Zd) failed.\n", __func__, sizeof(struct aircable_private)); return -ENOMEM; } diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index bb19f1c2e0d..b7eacad4d48 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -228,7 +228,7 @@ static int belkin_sa_open(struct tty_struct *tty, port->read_urb->dev = port->serial->dev; retval = usb_submit_urb(port->read_urb, GFP_KERNEL); if (retval) { - err("usb_submit_urb(read bulk) failed"); + dev_err(&port->dev, "usb_submit_urb(read bulk) failed\n"); goto exit; } @@ -236,7 +236,7 @@ static int belkin_sa_open(struct tty_struct *tty, retval = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (retval) { usb_kill_urb(port->read_urb); - err(" usb_submit_urb(read int) failed"); + dev_err(&port->dev, "usb_submit_urb(read int) failed\n"); } exit: @@ -342,8 +342,8 @@ static void belkin_sa_read_int_callback(struct urb *urb) exit: retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval) - err("%s - usb_submit_urb failed with result %d", - __func__, retval); + dev_err(&port->dev, "%s - usb_submit_urb failed with " + "result %d\n", __func__, retval); } static void belkin_sa_set_termios(struct tty_struct *tty, @@ -382,12 +382,12 @@ static void belkin_sa_set_termios(struct tty_struct *tty, if ((old_cflag & CBAUD) == B0) { control_state |= (TIOCM_DTR|TIOCM_RTS); if (BSA_USB_CMD(BELKIN_SA_SET_DTR_REQUEST, 1) < 0) - err("Set DTR error"); + dev_err(&port->dev, "Set DTR error\n"); /* don't set RTS if using hardware flow control */ if (!(old_cflag & CRTSCTS)) if (BSA_USB_CMD(BELKIN_SA_SET_RTS_REQUEST , 1) < 0) - err("Set RTS error"); + dev_err(&port->dev, "Set RTS error\n"); } } @@ -403,18 +403,18 @@ static void belkin_sa_set_termios(struct tty_struct *tty, /* Report the actual baud rate back to the caller */ tty_encode_baud_rate(tty, baud, baud); if (BSA_USB_CMD(BELKIN_SA_SET_BAUDRATE_REQUEST, urb_value) < 0) - err("Set baudrate error"); + dev_err(&port->dev, "Set baudrate error\n"); } else { /* Disable flow control */ if (BSA_USB_CMD(BELKIN_SA_SET_FLOW_CTRL_REQUEST, BELKIN_SA_FLOW_NONE) < 0) - err("Disable flowcontrol error"); + dev_err(&port->dev, "Disable flowcontrol error\n"); /* Drop RTS and DTR */ control_state &= ~(TIOCM_DTR | TIOCM_RTS); if (BSA_USB_CMD(BELKIN_SA_SET_DTR_REQUEST, 0) < 0) - err("DTR LOW error"); + dev_err(&port->dev, "DTR LOW error\n"); if (BSA_USB_CMD(BELKIN_SA_SET_RTS_REQUEST, 0) < 0) - err("RTS LOW error"); + dev_err(&port->dev, "RTS LOW error\n"); } /* set the parity */ @@ -425,7 +425,7 @@ static void belkin_sa_set_termios(struct tty_struct *tty, else urb_value = BELKIN_SA_PARITY_NONE; if (BSA_USB_CMD(BELKIN_SA_SET_PARITY_REQUEST, urb_value) < 0) - err("Set parity error"); + dev_err(&port->dev, "Set parity error\n"); } /* set the number of data bits */ @@ -448,7 +448,7 @@ static void belkin_sa_set_termios(struct tty_struct *tty, break; } if (BSA_USB_CMD(BELKIN_SA_SET_DATA_BITS_REQUEST, urb_value) < 0) - err("Set data bits error"); + dev_err(&port->dev, "Set data bits error\n"); } /* set the number of stop bits */ @@ -457,7 +457,7 @@ static void belkin_sa_set_termios(struct tty_struct *tty, : BELKIN_SA_STOP_BITS(1); if (BSA_USB_CMD(BELKIN_SA_SET_STOP_BITS_REQUEST, urb_value) < 0) - err("Set stop bits error"); + dev_err(&port->dev, "Set stop bits error\n"); } /* Set flow control */ @@ -478,7 +478,7 @@ static void belkin_sa_set_termios(struct tty_struct *tty, urb_value &= ~(BELKIN_SA_FLOW_IRTS); if (BSA_USB_CMD(BELKIN_SA_SET_FLOW_CTRL_REQUEST, urb_value) < 0) - err("Set flow control error"); + dev_err(&port->dev, "Set flow control error\n"); } /* save off the modified port settings */ @@ -494,7 +494,7 @@ static void belkin_sa_break_ctl(struct tty_struct *tty, int break_state) struct usb_serial *serial = port->serial; if (BSA_USB_CMD(BELKIN_SA_SET_BREAK_REQUEST, break_state ? 1 : 0) < 0) - err("Set break_ctl %d", break_state); + dev_err(&port->dev, "Set break_ctl %d\n", break_state); } @@ -554,13 +554,13 @@ static int belkin_sa_tiocmset(struct tty_struct *tty, struct file *file, retval = BSA_USB_CMD(BELKIN_SA_SET_RTS_REQUEST, rts); if (retval < 0) { - err("Set RTS error %d", retval); + dev_err(&port->dev, "Set RTS error %d\n", retval); goto exit; } retval = BSA_USB_CMD(BELKIN_SA_SET_DTR_REQUEST, dtr); if (retval < 0) { - err("Set DTR error %d", retval); + dev_err(&port->dev, "Set DTR error %d\n", retval); goto exit; } exit: diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index 068680f9929..858bdd038fb 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -141,7 +141,8 @@ static int cyberjack_startup(struct usb_serial *serial) result = usb_submit_urb(serial->port[i]->interrupt_in_urb, GFP_KERNEL); if (result) - err(" usb_submit_urb(read int) failed"); + dev_err(&serial->dev->dev, + "usb_submit_urb(read int) failed\n"); dbg("%s - usb_submit_urb(int urb)", __func__); } @@ -274,8 +275,9 @@ static int cyberjack_write(struct tty_struct *tty, /* send the data out the bulk port */ result = usb_submit_urb(port->write_urb, GFP_ATOMIC); if (result) { - err("%s - failed submitting write urb, error %d", - __func__, result); + dev_err(&port->dev, + "%s - failed submitting write urb, error %d", + __func__, result); /* Throw away data. No better idea what to do with it. */ priv->wrfilled = 0; priv->wrsent = 0; @@ -351,7 +353,9 @@ static void cyberjack_read_int_callback(struct urb *urb) port->read_urb->dev = port->serial->dev; result = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (result) - err("%s - failed resubmitting read urb, error %d", __func__, result); + dev_err(&port->dev, "%s - failed resubmitting " + "read urb, error %d\n", + __func__, result); dbg("%s - usb_submit_urb(read urb)", __func__); } } @@ -360,7 +364,7 @@ resubmit: port->interrupt_in_urb->dev = port->serial->dev; result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); if (result) - err(" usb_submit_urb(read int) failed"); + dev_err(&port->dev, "usb_submit_urb(read int) failed\n"); dbg("%s - usb_submit_urb(int urb)", __func__); } @@ -414,8 +418,8 @@ static void cyberjack_read_bulk_callback(struct urb *urb) port->read_urb->dev = port->serial->dev; result = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (result) - err("%s - failed resubmitting read urb, error %d", - __func__, result); + dev_err(&port->dev, "%s - failed resubmitting read " + "urb, error %d\n", __func__, result); dbg("%s - usb_submit_urb(read urb)", __func__); } } @@ -462,8 +466,9 @@ static void cyberjack_write_bulk_callback(struct urb *urb) /* send the data out the bulk port */ result = usb_submit_urb(port->write_urb, GFP_ATOMIC); if (result) { - err("%s - failed submitting write urb, error %d", - __func__, result); + dev_err(&port->dev, + "%s - failed submitting write urb, error %d\n", + __func__, result); /* Throw away data. No better idea what to do with it. */ priv->wrfilled = 0; priv->wrsent = 0; diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index e0ca809f75f..eae4740d448 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -404,8 +404,8 @@ static int cypress_serial_control(struct tty_struct *tty, retval != -ENODEV); if (retval != sizeof(feature_buffer)) { - err("%s - failed sending serial line settings - %d", - __func__, retval); + dev_err(&port->dev, "%s - failed sending serial " + "line settings - %d\n", __func__, retval); cypress_set_dead(port); } else { spin_lock_irqsave(&priv->lock, flags); @@ -443,7 +443,8 @@ static int cypress_serial_control(struct tty_struct *tty, && retval != -ENODEV); if (retval != sizeof(feature_buffer)) { - err("%s - failed to retrieve serial line settings - %d", __func__, retval); + dev_err(&port->dev, "%s - failed to retrieve serial " + "line settings - %d\n", __func__, retval); cypress_set_dead(port); return retval; } else { @@ -476,8 +477,8 @@ static void cypress_set_dead(struct usb_serial_port *port) priv->comm_is_ok = 0; spin_unlock_irqrestore(&priv->lock, flags); - err("cypress_m8 suspending failing port %d - interval might be too short", - port->number); + dev_err(&port->dev, "cypress_m8 suspending failing port %d - " + "interval might be too short\n", port->number); } @@ -679,7 +680,8 @@ static int cypress_open(struct tty_struct *tty, /* setup the port and start reading from the device */ if (!port->interrupt_in_urb) { - err("%s - interrupt_in_urb is empty!", __func__); + dev_err(&port->dev, "%s - interrupt_in_urb is empty!\n", + __func__); return -1; } @@ -1107,8 +1109,8 @@ static void cypress_set_termios(struct tty_struct *tty, data_bits = 3; break; default: - err("%s - CSIZE was set, but not CS5-CS8", - __func__); + dev_err(&port->dev, "%s - CSIZE was set, but not CS5-CS8\n", + __func__); data_bits = 3; } spin_lock_irqsave(&priv->lock, flags); diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index ebc2918719a..69f84f0ea6f 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -661,7 +661,8 @@ static int digi_write_oob_command(struct usb_serial_port *port, } spin_unlock_irqrestore(&oob_priv->dp_port_lock, flags); if (ret) - err("%s: usb_submit_urb failed, ret=%d", __func__, ret); + dev_err(&port->dev, "%s: usb_submit_urb failed, ret=%d\n", + __func__, ret); return ret; } @@ -743,7 +744,8 @@ static int digi_write_inb_command(struct usb_serial_port *port, spin_unlock_irqrestore(&priv->dp_port_lock, flags); if (ret) - err("%s: usb_submit_urb failed, ret=%d, port=%d", + dev_err(&port->dev, + "%s: usb_submit_urb failed, ret=%d, port=%d\n", __func__, ret, priv->dp_port_num); return ret; } @@ -812,7 +814,8 @@ static int digi_set_modem_signals(struct usb_serial_port *port, spin_unlock(&port_priv->dp_port_lock); spin_unlock_irqrestore(&oob_priv->dp_port_lock, flags); if (ret) - err("%s: usb_submit_urb failed, ret=%d", __func__, ret); + dev_err(&port->dev, "%s: usb_submit_urb failed, ret=%d\n", + __func__, ret); return ret; } @@ -907,7 +910,8 @@ static void digi_rx_unthrottle(struct tty_struct *tty) spin_unlock_irqrestore(&priv->dp_port_lock, flags); if (ret) - err("%s: usb_submit_urb failed, ret=%d, port=%d", + dev_err(&port->dev, + "%s: usb_submit_urb failed, ret=%d, port=%d\n", __func__, ret, priv->dp_port_num); } @@ -1214,7 +1218,8 @@ static int digi_write(struct tty_struct *tty, struct usb_serial_port *port, /* return length of new data written, or error */ spin_unlock_irqrestore(&priv->dp_port_lock, flags); if (ret < 0) - err("%s: usb_submit_urb failed, ret=%d, port=%d", + dev_err(&port->dev, + "%s: usb_submit_urb failed, ret=%d, port=%d\n", __func__, ret, priv->dp_port_num); dbg("digi_write: returning %d", ret); return ret; @@ -1235,14 +1240,16 @@ static void digi_write_bulk_callback(struct urb *urb) /* port and serial sanity check */ if (port == NULL || (priv = usb_get_serial_port_data(port)) == NULL) { - err("%s: port or port->private is NULL, status=%d", - __func__, status); + dev_err(&port->dev, + "%s: port or port->private is NULL, status=%d\n", + __func__, status); return; } serial = port->serial; if (serial == NULL || (serial_priv = usb_get_serial_data(serial)) == NULL) { - err("%s: serial or serial->private is NULL, status=%d", - __func__, status); + dev_err(&port->dev, + "%s: serial or serial->private is NULL, status=%d\n", + __func__, status); return; } @@ -1284,7 +1291,8 @@ static void digi_write_bulk_callback(struct urb *urb) spin_unlock(&priv->dp_port_lock); if (ret) - err("%s: usb_submit_urb failed, ret=%d, port=%d", + dev_err(&port->dev, + "%s: usb_submit_urb failed, ret=%d, port=%d\n", __func__, ret, priv->dp_port_num); } @@ -1518,8 +1526,9 @@ static int digi_startup_device(struct usb_serial *serial) port->write_urb->dev = port->serial->dev; ret = usb_submit_urb(port->read_urb, GFP_KERNEL); if (ret != 0) { - err("%s: usb_submit_urb failed, ret=%d, port=%d", - __func__, ret, i); + dev_err(&port->dev, + "%s: usb_submit_urb failed, ret=%d, port=%d\n", + __func__, ret, i); break; } } @@ -1618,22 +1627,26 @@ static void digi_read_bulk_callback(struct urb *urb) dbg("digi_read_bulk_callback: TOP"); /* port sanity check, do not resubmit if port is not valid */ - if (port == NULL || (priv = usb_get_serial_port_data(port)) == NULL) { - err("%s: port or port->private is NULL, status=%d", - __func__, status); + if (port == NULL) + return; + priv = usb_get_serial_port_data(port); + if (priv == NULL) { + dev_err(&port->dev, "%s: port->private is NULL, status=%d\n", + __func__, status); return; } if (port->serial == NULL || (serial_priv = usb_get_serial_data(port->serial)) == NULL) { - err("%s: serial is bad or serial->private is NULL, status=%d", - __func__, status); + dev_err(&port->dev, "%s: serial is bad or serial->private " + "is NULL, status=%d\n", __func__, status); return; } /* do not resubmit urb if it has any status error */ if (status) { - err("%s: nonzero read bulk status: status=%d, port=%d", - __func__, status, priv->dp_port_num); + dev_err(&port->dev, + "%s: nonzero read bulk status: status=%d, port=%d\n", + __func__, status, priv->dp_port_num); return; } @@ -1650,8 +1663,9 @@ static void digi_read_bulk_callback(struct urb *urb) urb->dev = port->serial->dev; ret = usb_submit_urb(urb, GFP_ATOMIC); if (ret != 0) { - err("%s: failed resubmitting urb, ret=%d, port=%d", - __func__, ret, priv->dp_port_num); + dev_err(&port->dev, + "%s: failed resubmitting urb, ret=%d, port=%d\n", + __func__, ret, priv->dp_port_num); } } @@ -1687,10 +1701,11 @@ static int digi_read_inb_callback(struct urb *urb) /* short/multiple packet check */ if (urb->actual_length != len + 2) { - err("%s: INCOMPLETE OR MULTIPLE PACKET, urb->status=%d, " - "port=%d, opcode=%d, len=%d, actual_length=%d, " - "status=%d", __func__, status, priv->dp_port_num, - opcode, len, urb->actual_length, port_status); + dev_err(&port->dev, "%s: INCOMPLETE OR MULTIPLE PACKET, " + "urb->status=%d, port=%d, opcode=%d, len=%d, " + "actual_length=%d, status=%d\n", __func__, status, + priv->dp_port_num, opcode, len, urb->actual_length, + port_status); return -1; } diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c index fdd28e940bc..8a69cce40b6 100644 --- a/drivers/usb/serial/empeg.c +++ b/drivers/usb/serial/empeg.c @@ -416,7 +416,7 @@ static int empeg_startup(struct usb_serial *serial) dbg("%s", __func__); if (serial->dev->actconfig->desc.bConfigurationValue != 1) { - err("active config #%d != 1 ??", + dev_err(&serial->dev->dev, "active config #%d != 1 ??\n", serial->dev->actconfig->desc.bConfigurationValue); return -ENODEV; } @@ -499,15 +499,15 @@ static int __init empeg_init(void) urb = usb_alloc_urb(0, GFP_KERNEL); write_urb_pool[i] = urb; if (urb == NULL) { - err("No more urbs???"); + printk(KERN_ERR "empeg: No more urbs???\n"); continue; } urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL); if (!urb->transfer_buffer) { - err("%s - out of memory for urb buffers.", - __func__); + printk(KERN_ERR "empeg: %s - out of memory for urb " + "buffers.", __func__); continue; } } diff --git a/drivers/usb/serial/ezusb.c b/drivers/usb/serial/ezusb.c index 711e84f6ed8..3cfc762f505 100644 --- a/drivers/usb/serial/ezusb.c +++ b/drivers/usb/serial/ezusb.c @@ -28,7 +28,8 @@ int ezusb_writememory(struct usb_serial *serial, int address, /* dbg("ezusb_writememory %x, %d", address, length); */ if (!serial->dev) { - err("%s - no physical device present, failing.", __func__); + printk(KERN_ERR "ezusb: %s - no physical device present, " + "failing.\n", __func__); return -ENODEV; } diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index bcadb1f4f5d..51d7bdea286 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1327,7 +1327,7 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port) priv = kzalloc(sizeof(struct ftdi_private), GFP_KERNEL); if (!priv) { - err("%s- kmalloc(%Zd) failed.", __func__, + dev_err(&port->dev, "%s- kmalloc(%Zd) failed.\n", __func__, sizeof(struct ftdi_private)); return -ENOMEM; } @@ -1524,8 +1524,9 @@ static int ftdi_open(struct tty_struct *tty, ftdi_read_bulk_callback, port); result = usb_submit_urb(port->read_urb, GFP_KERNEL); if (result) - err("%s - failed submitting read urb, error %d", - __func__, result); + dev_err(&port->dev, + "%s - failed submitting read urb, error %d\n", + __func__, result); return result; @@ -1559,7 +1560,7 @@ static void ftdi_close(struct tty_struct *tty, FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, 0, priv->interface, buf, 0, WDR_TIMEOUT) < 0) { - err("error from flowcontrol urb"); + dev_err(&port->dev, "error from flowcontrol urb\n"); } /* drop RTS and DTR */ @@ -1624,14 +1625,15 @@ static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port, buffer = kmalloc(transfer_size, GFP_ATOMIC); if (!buffer) { - err("%s ran out of kernel memory for urb ...", __func__); + dev_err(&port->dev, + "%s ran out of kernel memory for urb ...\n", __func__); count = -ENOMEM; goto error_no_buffer; } urb = usb_alloc_urb(0, GFP_ATOMIC); if (!urb) { - err("%s - no more free urbs", __func__); + dev_err(&port->dev, "%s - no more free urbs\n", __func__); count = -ENOMEM; goto error_no_urb; } @@ -1675,8 +1677,9 @@ static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port, status = usb_submit_urb(urb, GFP_ATOMIC); if (status) { - err("%s - failed submitting write urb, error %d", - __func__, status); + dev_err(&port->dev, + "%s - failed submitting write urb, error %d\n", + __func__, status); count = status; goto error; } else { @@ -1783,7 +1786,8 @@ static int ftdi_chars_in_buffer(struct tty_struct *tty) buffered = (int)priv->tx_outstanding_bytes; spin_unlock_irqrestore(&priv->tx_lock, flags); if (buffered < 0) { - err("%s outstanding tx bytes is negative!", __func__); + dev_err(&port->dev, "%s outstanding tx bytes is negative!\n", + __func__); buffered = 0; } return buffered; @@ -1799,11 +1803,12 @@ static void ftdi_read_bulk_callback(struct urb *urb) int status = urb->status; if (urb->number_of_packets > 0) { - err("%s transfer_buffer_length %d actual_length %d number of packets %d", - __func__, - urb->transfer_buffer_length, - urb->actual_length, urb->number_of_packets); - err("%s transfer_flags %x ", __func__, urb->transfer_flags); + dev_err(&port->dev, "%s transfer_buffer_length %d " + "actual_length %d number of packets %d\n", __func__, + urb->transfer_buffer_length, + urb->actual_length, urb->number_of_packets); + dev_err(&port->dev, "%s transfer_flags %x\n", __func__, + urb->transfer_flags); } dbg("%s - port %d", __func__, port->number); @@ -1824,7 +1829,7 @@ static void ftdi_read_bulk_callback(struct urb *urb) } if (urb != port->read_urb) - err("%s - Not my urb!", __func__); + dev_err(&port->dev, "%s - Not my urb!\n", __func__); if (status) { /* This will happen at close every time so it is a dbg not an @@ -1927,7 +1932,8 @@ static void ftdi_process_read(struct work_struct *work) length = min(PKTSZ, urb->actual_length-packet_offset)-2; if (length < 0) { - err("%s - bad packet length: %d", __func__, length+2); + dev_err(&port->dev, "%s - bad packet length: %d\n", + __func__, length+2); length = 0; } @@ -2042,8 +2048,9 @@ static void ftdi_process_read(struct work_struct *work) result = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (result) - err("%s - failed resubmitting read urb, error %d", - __func__, result); + dev_err(&port->dev, + "%s - failed resubmitting read urb, error %d\n", + __func__, result); } out: tty_kref_put(tty); @@ -2072,8 +2079,8 @@ static void ftdi_break_ctl(struct tty_struct *tty, int break_state) FTDI_SIO_SET_DATA_REQUEST_TYPE, urb_value , priv->interface, buf, 0, WDR_TIMEOUT) < 0) { - err("%s FAILED to enable/disable break state (state was %d)", - __func__, break_state); + dev_err(&port->dev, "%s FAILED to enable/disable break state " + "(state was %d)\n", __func__, break_state); } dbg("%s break state is %d - urb is %d", __func__, @@ -2145,7 +2152,7 @@ static void ftdi_set_termios(struct tty_struct *tty, case CS7: urb_value |= 7; dbg("Setting CS7"); break; case CS8: urb_value |= 8; dbg("Setting CS8"); break; default: - err("CSIZE was set but not CS5-CS8"); + dev_err(&port->dev, "CSIZE was set but not CS5-CS8\n"); } } @@ -2158,7 +2165,8 @@ static void ftdi_set_termios(struct tty_struct *tty, FTDI_SIO_SET_DATA_REQUEST_TYPE, urb_value , priv->interface, buf, 0, WDR_SHORT_TIMEOUT) < 0) { - err("%s FAILED to set databits/stopbits/parity", __func__); + dev_err(&port->dev, "%s FAILED to set " + "databits/stopbits/parity\n", __func__); } /* Now do the baudrate */ @@ -2169,14 +2177,17 @@ static void ftdi_set_termios(struct tty_struct *tty, FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, 0, priv->interface, buf, 0, WDR_TIMEOUT) < 0) { - err("%s error from disable flowcontrol urb", __func__); + dev_err(&port->dev, + "%s error from disable flowcontrol urb\n", + __func__); } /* Drop RTS and DTR */ clear_mctrl(port, TIOCM_DTR | TIOCM_RTS); } else { /* set the baudrate determined before */ if (change_speed(tty, port)) - err("%s urb failed to set baudrate", __func__); + dev_err(&port->dev, "%s urb failed to set baudrate\n", + __func__); /* Ensure RTS and DTR are raised when baudrate changed from 0 */ if (!old_termios || (old_termios->c_cflag & CBAUD) == B0) set_mctrl(port, TIOCM_DTR | TIOCM_RTS); @@ -2192,7 +2203,8 @@ static void ftdi_set_termios(struct tty_struct *tty, FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, 0 , (FTDI_SIO_RTS_CTS_HS | priv->interface), buf, 0, WDR_TIMEOUT) < 0) { - err("urb failed to set to rts/cts flow control"); + dev_err(&port->dev, + "urb failed to set to rts/cts flow control\n"); } } else { @@ -2223,7 +2235,8 @@ static void ftdi_set_termios(struct tty_struct *tty, urb_value , (FTDI_SIO_XON_XOFF_HS | priv->interface), buf, 0, WDR_TIMEOUT) < 0) { - err("urb failed to set to xon/xoff flow control"); + dev_err(&port->dev, "urb failed to set to " + "xon/xoff flow control\n"); } } else { /* else clause to only run if cflag ! CRTSCTS and iflag @@ -2236,7 +2249,8 @@ static void ftdi_set_termios(struct tty_struct *tty, FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, 0, priv->interface, buf, 0, WDR_TIMEOUT) < 0) { - err("urb failed to clear flow control"); + dev_err(&port->dev, + "urb failed to clear flow control\n"); } } diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index eb95efdfbe8..e85c8c0d1ad 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -3109,13 +3109,13 @@ static int edge_startup(struct usb_serial *serial) edge_serial->interrupt_read_urb = usb_alloc_urb(0, GFP_KERNEL); if (!edge_serial->interrupt_read_urb) { - err("out of memory"); + dev_err(&dev->dev, "out of memory\n"); return -ENOMEM; } edge_serial->interrupt_in_buffer = kmalloc(buffer_size, GFP_KERNEL); if (!edge_serial->interrupt_in_buffer) { - err("out of memory"); + dev_err(&dev->dev, "out of memory\n"); usb_free_urb(edge_serial->interrupt_read_urb); return -ENOMEM; } @@ -3146,13 +3146,13 @@ static int edge_startup(struct usb_serial *serial) edge_serial->read_urb = usb_alloc_urb(0, GFP_KERNEL); if (!edge_serial->read_urb) { - err("out of memory"); + dev_err(&dev->dev, "out of memory\n"); return -ENOMEM; } edge_serial->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL); if (!edge_serial->bulk_in_buffer) { - err("out of memory"); + dev_err(&dev->dev, "out of memory\n"); usb_free_urb(edge_serial->read_urb); return -ENOMEM; } @@ -3181,7 +3181,8 @@ static int edge_startup(struct usb_serial *serial) } if (!interrupt_in_found || !bulk_in_found || !bulk_out_found) { - err("Error - the proper endpoints were not found!"); + dev_err(&dev->dev, "Error - the proper endpoints " + "were not found!\n"); return -ENODEV; } @@ -3190,8 +3191,9 @@ static int edge_startup(struct usb_serial *serial) response = usb_submit_urb(edge_serial->interrupt_read_urb, GFP_KERNEL); if (response) - err("%s - Error %d submitting control urb", - __func__, response); + dev_err(&dev->dev, + "%s - Error %d submitting control urb\n", + __func__, response); } return response; } diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index 5108cbc64a5..132be74d2b8 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -608,7 +608,7 @@ static int ipaq_open(struct tty_struct *tty, bytes_out = 0; priv = kmalloc(sizeof(struct ipaq_private), GFP_KERNEL); if (priv == NULL) { - err("%s - Out of memory", __func__); + dev_err(&port->dev, "%s - Out of memory\n", __func__); return -ENOMEM; } usb_set_serial_port_data(port, priv); @@ -693,8 +693,7 @@ static int ipaq_open(struct tty_struct *tty, } if (!retries && result) { - err("%s - failed doing control urb, error %d", __func__, - result); + dev_err(&port->dev, "%s - failed doing control urb, error %d\n", __func__, result); goto error; } @@ -707,8 +706,9 @@ static int ipaq_open(struct tty_struct *tty, result = usb_submit_urb(port->read_urb, GFP_KERNEL); if (result) { - err("%s - failed submitting read urb, error %d", - __func__, result); + dev_err(&port->dev, + "%s - failed submitting read urb, error %d\n", + __func__, result); goto error; } @@ -716,7 +716,7 @@ static int ipaq_open(struct tty_struct *tty, enomem: result = -ENOMEM; - err("%s - Out of memory", __func__); + dev_err(&port->dev, "%s - Out of memory\n", __func__); error: ipaq_destroy_lists(port); kfree(priv); @@ -781,8 +781,9 @@ static void ipaq_read_bulk_callback(struct urb *urb) ipaq_read_bulk_callback, port); result = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (result) - err("%s - failed resubmitting read urb, error %d", - __func__, result); + dev_err(&port->dev, + "%s - failed resubmitting read urb, error %d\n", + __func__, result); return; } @@ -847,7 +848,8 @@ static int ipaq_write_bulk(struct usb_serial_port *port, spin_unlock_irqrestore(&write_list_lock, flags); result = usb_submit_urb(port->write_urb, GFP_ATOMIC); if (result) - err("%s - failed submitting write urb, error %d", + dev_err(&port->dev, + "%s - failed submitting write urb, error %d\n", __func__, result); } else { spin_unlock_irqrestore(&write_list_lock, flags); @@ -909,8 +911,9 @@ static void ipaq_write_bulk_callback(struct urb *urb) spin_unlock_irqrestore(&write_list_lock, flags); result = usb_submit_urb(port->write_urb, GFP_ATOMIC); if (result) - err("%s - failed submitting write urb, error %d", - __func__, result); + dev_err(&port->dev, + "%s - failed submitting write urb, error %d\n", + __func__, result); } else { priv->active = 0; spin_unlock_irqrestore(&write_list_lock, flags); @@ -957,7 +960,7 @@ static int ipaq_startup(struct usb_serial *serial) { dbg("%s", __func__); if (serial->dev->actconfig->desc.bConfigurationValue != 1) { - err("active config #%d != 1 ??", + dev_err(&serial->dev->dev, "active config #%d != 1 ??\n", serial->dev->actconfig->desc.bConfigurationValue); return -ENODEV; } diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index 2928ba84439..bf1ae247da6 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -742,11 +742,13 @@ static int keyspan_pda_fake_startup(struct usb_serial *serial) fw_name = "keyspan_pda/xircom_pgs.fw"; #endif else { - err("%s: unknown vendor, aborting.", __func__); + dev_err(&serial->dev->dev, "%s: unknown vendor, aborting.\n", + __func__); return -ENODEV; } if (request_ihex_firmware(&fw, fw_name, &serial->dev->dev)) { - err("failed to load firmware \"%s\"\n", fw_name); + dev_err(&serial->dev->dev, "failed to load firmware \"%s\"\n", + fw_name); return -ENOENT; } record = (const struct ihex_binrec *)fw->data; @@ -756,10 +758,10 @@ static int keyspan_pda_fake_startup(struct usb_serial *serial) (unsigned char *)record->data, be16_to_cpu(record->len), 0xa0); if (response < 0) { - err("ezusb_writememory failed for Keyspan PDA " - "firmware (%d %04X %p %d)", - response, be32_to_cpu(record->addr), - record->data, be16_to_cpu(record->len)); + dev_err(&serial->dev->dev, "ezusb_writememory failed " + "for Keyspan PDA firmware (%d %04X %p %d)\n", + response, be32_to_cpu(record->addr), + record->data, be16_to_cpu(record->len)); break; } record = ihex_next_binrec(record); diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index 573c6972fae..dc36a052766 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -182,7 +182,8 @@ static int klsi_105_chg_port_settings(struct usb_serial_port *port, sizeof(struct klsi_105_port_settings), KLSI_TIMEOUT); if (rc < 0) - err("Change port settings failed (error = %d)", rc); + dev_err(&port->dev, + "Change port settings failed (error = %d)\n", rc); dev_info(&port->serial->dev->dev, "%d byte block, baudrate %x, databits %d, u1 %d, u2 %d\n", settings->pktlen, settings->baudrate, settings->databits, @@ -225,7 +226,8 @@ static int klsi_105_get_line_state(struct usb_serial_port *port, 10000 ); if (rc < 0) - err("Reading line status failed (error = %d)", rc); + dev_err(&port->dev, "Reading line status failed (error = %d)\n", + rc); else { status = get_unaligned_le16(status_buf); @@ -279,15 +281,16 @@ static int klsi_105_startup(struct usb_serial *serial) priv->write_urb_pool[j] = urb; if (urb == NULL) { - err("No more urbs???"); + dev_err(&serial->dev->dev, "No more urbs???\n"); goto err_cleanup; } urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL); if (!urb->transfer_buffer) { - err("%s - out of memory for urb buffers.", - __func__); + dev_err(&serial->dev->dev, + "%s - out of memory for urb buffers.\n", + __func__); goto err_cleanup; } } @@ -408,7 +411,8 @@ static int klsi_105_open(struct tty_struct *tty, rc = usb_submit_urb(port->read_urb, GFP_KERNEL); if (rc) { - err("%s - failed submitting read urb, error %d", __func__, rc); + dev_err(&port->dev, "%s - failed submitting read urb, " + "error %d\n", __func__, rc); retval = rc; goto exit; } @@ -423,7 +427,7 @@ static int klsi_105_open(struct tty_struct *tty, 0, KLSI_TIMEOUT); if (rc < 0) { - err("Enabling read failed (error = %d)", rc); + dev_err(&port->dev, "Enabling read failed (error = %d)\n", rc); retval = rc; } else dbg("%s - enabled reading", __func__); @@ -463,7 +467,8 @@ static void klsi_105_close(struct tty_struct *tty, NULL, 0, KLSI_TIMEOUT); if (rc < 0) - err("Disabling read failed (error = %d)", rc); + dev_err(&port->dev, + "Disabling read failed (error = %d)\n", rc); } mutex_unlock(&port->serial->disc_mutex); @@ -522,7 +527,9 @@ static int klsi_105_write(struct tty_struct *tty, urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_ATOMIC); if (urb->transfer_buffer == NULL) { - err("%s - no more kernel memory...", __func__); + dev_err(&port->dev, + "%s - no more kernel memory...\n", + __func__); goto exit; } } @@ -549,8 +556,9 @@ static int klsi_105_write(struct tty_struct *tty, /* send the data out the bulk port */ result = usb_submit_urb(urb, GFP_ATOMIC); if (result) { - err("%s - failed submitting write urb, error %d", - __func__, result); + dev_err(&port->dev, + "%s - failed submitting write urb, error %d\n", + __func__, result); goto exit; } buf += size; @@ -694,8 +702,9 @@ static void klsi_105_read_bulk_callback(struct urb *urb) port); rc = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (rc) - err("%s - failed resubmitting read urb, error %d", - __func__, rc); + dev_err(&port->dev, + "%s - failed resubmitting read urb, error %d\n", + __func__, rc); } /* klsi_105_read_bulk_callback */ @@ -799,7 +808,8 @@ static void klsi_105_set_termios(struct tty_struct *tty, priv->cfg.databits = kl5kusb105a_dtb_8; break; default: - err("CSIZE was not CS5-CS8, using default of 8"); + dev_err(&port->dev, + "CSIZE was not CS5-CS8, using default of 8\n"); priv->cfg.databits = kl5kusb105a_dtb_8; break; } @@ -886,7 +896,8 @@ static int klsi_105_tiocmget(struct tty_struct *tty, struct file *file) rc = klsi_105_get_line_state(port, &line_state); if (rc < 0) { - err("Reading line control failed (error = %d)", rc); + dev_err(&port->dev, + "Reading line control failed (error = %d)\n", rc); /* better return value? EAGAIN? */ return rc; } @@ -944,8 +955,9 @@ static void klsi_105_unthrottle(struct tty_struct *tty) port->read_urb->dev = port->serial->dev; result = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (result) - err("%s - failed submitting read urb, error %d", __func__, - result); + dev_err(&port->dev, + "%s - failed submitting read urb, error %d\n", + __func__, result); } diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index 29fa66ea2d2..07710cf31d0 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -246,7 +246,8 @@ static int mct_u232_set_baud_rate(struct tty_struct *tty, 0, 0, &divisor, MCT_U232_SET_BAUD_RATE_SIZE, WDR_TIMEOUT); if (rc < 0) /*FIXME: What value speed results */ - err("Set BAUD RATE %d failed (error = %d)", value, rc); + dev_err(&port->dev, "Set BAUD RATE %d failed (error = %d)\n", + value, rc); else tty_encode_baud_rate(tty, speed, speed); dbg("set_baud_rate: value: 0x%x, divisor: 0x%x", value, divisor); @@ -274,8 +275,9 @@ static int mct_u232_set_baud_rate(struct tty_struct *tty, 0, 0, &zero_byte, MCT_U232_SET_UNKNOWN1_SIZE, WDR_TIMEOUT); if (rc < 0) - err("Sending USB device request code %d failed (error = %d)", - MCT_U232_SET_UNKNOWN1_REQUEST, rc); + dev_err(&port->dev, "Sending USB device request code %d " + "failed (error = %d)\n", MCT_U232_SET_UNKNOWN1_REQUEST, + rc); if (port && C_CRTSCTS(tty)) cts_enable_byte = 1; @@ -288,8 +290,8 @@ static int mct_u232_set_baud_rate(struct tty_struct *tty, 0, 0, &cts_enable_byte, MCT_U232_SET_CTS_SIZE, WDR_TIMEOUT); if (rc < 0) - err("Sending USB device request code %d failed (error = %d)", - MCT_U232_SET_CTS_REQUEST, rc); + dev_err(&port->dev, "Sending USB device request code %d " + "failed (error = %d)\n", MCT_U232_SET_CTS_REQUEST, rc); return rc; } /* mct_u232_set_baud_rate */ @@ -303,7 +305,8 @@ static int mct_u232_set_line_ctrl(struct usb_serial *serial, unsigned char lcr) 0, 0, &lcr, MCT_U232_SET_LINE_CTRL_SIZE, WDR_TIMEOUT); if (rc < 0) - err("Set LINE CTRL 0x%x failed (error = %d)", lcr, rc); + dev_err(&serial->dev->dev, + "Set LINE CTRL 0x%x failed (error = %d)\n", lcr, rc); dbg("set_line_ctrl: 0x%x", lcr); return rc; } /* mct_u232_set_line_ctrl */ @@ -325,7 +328,8 @@ static int mct_u232_set_modem_ctrl(struct usb_serial *serial, 0, 0, &mcr, MCT_U232_SET_MODEM_CTRL_SIZE, WDR_TIMEOUT); if (rc < 0) - err("Set MODEM CTRL 0x%x failed (error = %d)", mcr, rc); + dev_err(&serial->dev->dev, + "Set MODEM CTRL 0x%x failed (error = %d)\n", mcr, rc); dbg("set_modem_ctrl: state=0x%x ==> mcr=0x%x", control_state, mcr); return rc; @@ -341,7 +345,8 @@ static int mct_u232_get_modem_stat(struct usb_serial *serial, 0, 0, msr, MCT_U232_GET_MODEM_STAT_SIZE, WDR_TIMEOUT); if (rc < 0) { - err("Get MODEM STATus failed (error = %d)", rc); + dev_err(&serial->dev->dev, + "Get MODEM STATus failed (error = %d)\n", rc); *msr = 0; } dbg("get_modem_stat: 0x%x", *msr); @@ -470,8 +475,9 @@ static int mct_u232_open(struct tty_struct *tty, port->read_urb->dev = port->serial->dev; retval = usb_submit_urb(port->read_urb, GFP_KERNEL); if (retval) { - err("usb_submit_urb(read bulk) failed pipe 0x%x err %d", - port->read_urb->pipe, retval); + dev_err(&port->dev, + "usb_submit_urb(read bulk) failed pipe 0x%x err %d\n", + port->read_urb->pipe, retval); goto error; } @@ -479,8 +485,9 @@ static int mct_u232_open(struct tty_struct *tty, retval = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (retval) { usb_kill_urb(port->read_urb); - err(" usb_submit_urb(read int) failed pipe 0x%x err %d", - port->interrupt_in_urb->pipe, retval); + dev_err(&port->dev, + "usb_submit_urb(read int) failed pipe 0x%x err %d", + port->interrupt_in_urb->pipe, retval); goto error; } return 0; @@ -612,8 +619,9 @@ static void mct_u232_read_int_callback(struct urb *urb) exit: retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval) - err("%s - usb_submit_urb failed with result %d", - __func__, retval); + dev_err(&port->dev, + "%s - usb_submit_urb failed with result %d\n", + __func__, retval); } /* mct_u232_read_int_callback */ static void mct_u232_set_termios(struct tty_struct *tty, @@ -680,7 +688,8 @@ static void mct_u232_set_termios(struct tty_struct *tty, case CS8: last_lcr |= MCT_U232_DATA_BITS_8; break; default: - err("CSIZE was not CS5-CS8, using default of 8"); + dev_err(&port->dev, + "CSIZE was not CS5-CS8, using default of 8\n"); last_lcr |= MCT_U232_DATA_BITS_8; break; } diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index 5711aa55d24..e772cc0a97f 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -355,14 +355,16 @@ static int mos7720_open(struct tty_struct *tty, mos7720_port->write_urb_pool[j] = urb; if (urb == NULL) { - err("No more urbs???"); + dev_err(&port->dev, "No more urbs???\n"); continue; } urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL); if (!urb->transfer_buffer) { - err("%s-out of memory for urb buffers.", __func__); + dev_err(&port->dev, + "%s-out of memory for urb buffers.\n", + __func__); usb_free_urb(mos7720_port->write_urb_pool[j]); mos7720_port->write_urb_pool[j] = NULL; continue; @@ -694,7 +696,8 @@ static int mos7720_write(struct tty_struct *tty, struct usb_serial_port *port, urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL); if (urb->transfer_buffer == NULL) { - err("%s no more kernel memory...", __func__); + dev_err(&port->dev, "%s no more kernel memory...\n", + __func__); goto exit; } } @@ -714,8 +717,8 @@ static int mos7720_write(struct tty_struct *tty, struct usb_serial_port *port, /* send it down the pipe */ status = usb_submit_urb(urb, GFP_ATOMIC); if (status) { - err("%s - usb_submit_urb(write bulk) failed with status = %d", - __func__, status); + dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed " + "with status = %d\n", __func__, status); bytes_sent = status; goto exit; } @@ -975,7 +978,7 @@ static int send_cmd_write_baud_rate(struct moschip_port *mos7720_port, /* Calculate the Divisor */ status = calc_baud_rate_divisor(baudrate, &divisor); if (status) { - err("%s - bad baud rate", __func__); + dev_err(&port->dev, "%s - bad baud rate\n", __func__); return status; } @@ -1478,7 +1481,7 @@ static int mos7720_startup(struct usb_serial *serial) /* create our private serial structure */ mos7720_serial = kzalloc(sizeof(struct moschip_serial), GFP_KERNEL); if (mos7720_serial == NULL) { - err("%s - Out of memory", __func__); + dev_err(&dev->dev, "%s - Out of memory\n", __func__); return -ENOMEM; } @@ -1491,7 +1494,7 @@ static int mos7720_startup(struct usb_serial *serial) for (i = 0; i < serial->num_ports; ++i) { mos7720_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL); if (mos7720_port == NULL) { - err("%s - Out of memory", __func__); + dev_err(&dev->dev, "%s - Out of memory\n", __func__); usb_set_serial_data(serial, NULL); kfree(mos7720_serial); return -ENOMEM; diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index d5f682626e7..fda4a6421c4 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -844,7 +844,7 @@ static int mos7840_open(struct tty_struct *tty, mos7840_port->write_urb_pool[j] = urb; if (urb == NULL) { - err("No more urbs???"); + dev_err(&port->dev, "No more urbs???\n"); continue; } @@ -853,7 +853,9 @@ static int mos7840_open(struct tty_struct *tty, if (!urb->transfer_buffer) { usb_free_urb(urb); mos7840_port->write_urb_pool[j] = NULL; - err("%s-out of memory for urb buffers.", __func__); + dev_err(&port->dev, + "%s-out of memory for urb buffers.\n", + __func__); continue; } } @@ -1021,8 +1023,8 @@ static int mos7840_open(struct tty_struct *tty, usb_submit_urb(serial->port[0]->interrupt_in_urb, GFP_KERNEL); if (response) { - err("%s - Error %d submitting interrupt urb", - __func__, response); + dev_err(&port->dev, "%s - Error %d submitting " + "interrupt urb\n", __func__, response); } } @@ -1055,8 +1057,8 @@ static int mos7840_open(struct tty_struct *tty, port->bulk_in_endpointAddress); response = usb_submit_urb(mos7840_port->read_urb, GFP_KERNEL); if (response) { - err("%s - Error %d submitting control urb", __func__, - response); + dev_err(&port->dev, "%s - Error %d submitting control urb\n", + __func__, response); } /* initialize our wait queues */ @@ -1492,7 +1494,8 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port, kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL); if (urb->transfer_buffer == NULL) { - err("%s no more kernel memory...", __func__); + dev_err(&port->dev, "%s no more kernel memory...\n", + __func__); goto exit; } } @@ -1517,8 +1520,8 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port, if (status) { mos7840_port->busy[i] = 0; - err("%s - usb_submit_urb(write bulk) failed with status = %d", - __func__, status); + dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed " + "with status = %d\n", __func__, status); bytes_sent = status; goto exit; } @@ -1856,8 +1859,7 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port, /* Calculate the Divisor */ if (status) { - err("%s - bad baud rate", __func__); - dbg("%s\n", "bad baud rate"); + dev_err(&port->dev, "%s - bad baud rate\n", __func__); return status; } /* Enable access to divisor latch */ @@ -2446,7 +2448,7 @@ static int mos7840_startup(struct usb_serial *serial) for (i = 0; i < serial->num_ports; ++i) { mos7840_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL); if (mos7840_port == NULL) { - err("%s - Out of memory", __func__); + dev_err(&dev->dev, "%s - Out of memory\n", __func__); status = -ENOMEM; i--; /* don't follow NULL pointer cleaning up */ goto error; diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index 9890f26cd91..df653971272 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -154,8 +154,8 @@ static int omninet_attach(struct usb_serial *serial) od = kmalloc(sizeof(struct omninet_data), GFP_KERNEL); if (!od) { - err("%s- kmalloc(%Zd) failed.", - __func__, sizeof(struct omninet_data)); + dev_err(&port->dev, "%s- kmalloc(%Zd) failed.\n", + __func__, sizeof(struct omninet_data)); return -ENOMEM; } usb_set_serial_port_data(port, od); @@ -183,8 +183,9 @@ static int omninet_open(struct tty_struct *tty, omninet_read_bulk_callback, port); result = usb_submit_urb(port->read_urb, GFP_KERNEL); if (result) - err("%s - failed submitting read urb, error %d", - __func__, result); + dev_err(&port->dev, + "%s - failed submitting read urb, error %d\n", + __func__, result); return result; } @@ -244,8 +245,9 @@ static void omninet_read_bulk_callback(struct urb *urb) omninet_read_bulk_callback, port); result = usb_submit_urb(urb, GFP_ATOMIC); if (result) - err("%s - failed resubmitting read urb, error %d", - __func__, result); + dev_err(&port->dev, + "%s - failed resubmitting read urb, error %d\n", + __func__, result); return; } @@ -298,8 +300,9 @@ static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port, result = usb_submit_urb(wport->write_urb, GFP_ATOMIC); if (result) { wport->write_urb_busy = 0; - err("%s - failed submitting write urb, error %d", - __func__, result); + dev_err(&port->dev, + "%s - failed submitting write urb, error %d\n", + __func__, result); } else result = count; diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c index 40cff61cb4a..4b463cd140e 100644 --- a/drivers/usb/serial/safe_serial.c +++ b/drivers/usb/serial/safe_serial.c @@ -256,11 +256,12 @@ static void safe_read_bulk_callback(struct urb *urb) data, actual_length); tty_flip_buffer_push(tty); } else { - err("%s - inconsistent lengths %d:%d", + dev_err(&port->dev, + "%s - inconsistent lengths %d:%d\n", __func__, actual_length, length); } } else { - err("%s - bad CRC %x", __func__, fcs); + dev_err(&port->dev, "%s - bad CRC %x\n", __func__, fcs); } } else { tty_insert_flip_string(tty, data, length); @@ -277,8 +278,9 @@ static void safe_read_bulk_callback(struct urb *urb) result = usb_submit_urb(urb, GFP_ATOMIC); if (result) - err("%s - failed resubmitting read urb, error %d", - __func__, result); + dev_err(&port->dev, + "%s - failed resubmitting read urb, error %d\n", + __func__, result); /* FIXME: Need a mechanism to retry later if this happens */ } @@ -369,8 +371,9 @@ static int safe_write(struct tty_struct *tty, struct usb_serial_port *port, result = usb_submit_urb(port->write_urb, GFP_KERNEL); if (result) { port->write_urb_busy = 0; - err("%s - failed submitting write urb, error %d", - __func__, result); + dev_err(&port->dev, + "%s - failed submitting write urb, error %d\n", + __func__, result); return 0; } dbg("%s urb: %p submitted", __func__, port->write_urb); diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index 96aeec74619..a65bc2bd8e7 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -589,8 +589,8 @@ static void spcp8x5_set_termios(struct tty_struct *tty, case 1000000: buf[0] = 0x0b; break; default: - err("spcp825 driver does not support the baudrate " - "requested, using default of 9600."); + dev_err(&port->dev, "spcp825 driver does not support the " + "baudrate requested, using default of 9600.\n"); } /* Set Data Length : 00:5bit, 01:6bit, 10:7bit, 11:8bit */ @@ -629,7 +629,8 @@ static void spcp8x5_set_termios(struct tty_struct *tty, SET_UART_FORMAT_TYPE, SET_UART_FORMAT, uartdata, 0, NULL, 0, 100); if (i < 0) - err("Set UART format %#x failed (error = %d)", uartdata, i); + dev_err(&port->dev, "Set UART format %#x failed (error = %d)\n", + uartdata, i); dbg("0x21:0x40:0:0 %d\n", i); if (cflag & CRTSCTS) { diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 92ba4f7361e..8be3f39891c 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -1121,7 +1121,8 @@ static int __init usb_serial_init(void) result = bus_register(&usb_serial_bus_type); if (result) { - err("%s - registering bus driver failed", __func__); + printk(KERN_ERR "usb-serial: %s - registering bus driver " + "failed\n", __func__); goto exit_bus; } @@ -1142,21 +1143,24 @@ static int __init usb_serial_init(void) tty_set_operations(usb_serial_tty_driver, &serial_ops); result = tty_register_driver(usb_serial_tty_driver); if (result) { - err("%s - tty_register_driver failed", __func__); + printk(KERN_ERR "usb-serial: %s - tty_register_driver failed\n", + __func__); goto exit_reg_driver; } /* register the USB driver */ result = usb_register(&usb_serial_driver); if (result < 0) { - err("%s - usb_register failed", __func__); + printk(KERN_ERR "usb-serial: %s - usb_register failed\n", + __func__); goto exit_tty; } /* register the generic driver, if we should */ result = usb_serial_generic_register(debug); if (result < 0) { - err("%s - registering generic driver failed", __func__); + printk(KERN_ERR "usb-serial: %s - registering generic " + "driver failed\n", __func__); goto exit_generic; } @@ -1174,7 +1178,8 @@ exit_reg_driver: bus_unregister(&usb_serial_bus_type); exit_bus: - err("%s - returning with error %d", __func__, result); + printk(KERN_ERR "usb-serial: %s - returning with error %d\n", + __func__, result); put_tty_driver(usb_serial_tty_driver); return result; } @@ -1233,8 +1238,8 @@ int usb_serial_register(struct usb_serial_driver *driver) retval = usb_serial_bus_register(driver); if (retval) { - err("problem %d when registering driver %s", - retval, driver->description); + printk(KERN_ERR "usb-serial: problem %d when registering " + "driver %s\n", retval, driver->description); list_del(&driver->driver_list); } else printk(KERN_INFO "USB Serial support registered for %s\n", diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index de4b5f0e7f3..4facce3d936 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -768,7 +768,7 @@ static int visor_probe(struct usb_serial *serial, dbg("%s", __func__); if (serial->dev->actconfig->desc.bConfigurationValue != 1) { - err("active config #%d != 1 ??", + dev_err(&serial->dev->dev, "active config #%d != 1 ??\n", serial->dev->actconfig->desc.bConfigurationValue); return -ENODEV; } diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index 39f7f8d291d..5335d3211c0 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -303,12 +303,15 @@ static int whiteheat_firmware_download(struct usb_serial *serial, if (request_ihex_firmware(&firmware_fw, "whiteheat.fw", &serial->dev->dev)) { - err("%s - request \"whiteheat.fw\" failed", __func__); + dev_err(&serial->dev->dev, + "%s - request \"whiteheat.fw\" failed\n", __func__); goto out; } if (request_ihex_firmware(&loader_fw, "whiteheat_loader.fw", &serial->dev->dev)) { - err("%s - request \"whiteheat_loader.fw\" failed", __func__); + dev_err(&serial->dev->dev, + "%s - request \"whiteheat_loader.fw\" failed\n", + __func__); goto out; } ret = 0; @@ -320,9 +323,10 @@ static int whiteheat_firmware_download(struct usb_serial *serial, (unsigned char *)record->data, be16_to_cpu(record->len), 0xa0); if (response < 0) { - err("%s - ezusb_writememory failed for loader (%d %04X %p %d)", - __func__, response, be32_to_cpu(record->addr), - record->data, be16_to_cpu(record->len)); + dev_err(&serial->dev->dev, "%s - ezusb_writememory " + "failed for loader (%d %04X %p %d)\n", + __func__, response, be32_to_cpu(record->addr), + record->data, be16_to_cpu(record->len)); break; } record = ihex_next_binrec(record); @@ -338,9 +342,11 @@ static int whiteheat_firmware_download(struct usb_serial *serial, (unsigned char *)record->data, be16_to_cpu(record->len), 0xa3); if (response < 0) { - err("%s - ezusb_writememory failed for first firmware step (%d %04X %p %d)", - __func__, response, be32_to_cpu(record->addr), - record->data, be16_to_cpu(record->len)); + dev_err(&serial->dev->dev, "%s - ezusb_writememory " + "failed for first firmware step " + "(%d %04X %p %d)\n", __func__, response, + be32_to_cpu(record->addr), record->data, + be16_to_cpu(record->len)); break; } ++record; @@ -354,9 +360,11 @@ static int whiteheat_firmware_download(struct usb_serial *serial, (unsigned char *)record->data, be16_to_cpu(record->len), 0xa0); if (response < 0) { - err("%s - ezusb_writememory failed for second firmware step (%d %04X %p %d)", - __func__, response, be32_to_cpu(record->addr), - record->data, be16_to_cpu(record->len)); + dev_err(&serial->dev->dev, "%s - ezusb_writememory " + "failed for second firmware step " + "(%d %04X %p %d)\n", __func__, response, + be32_to_cpu(record->addr), record->data, + be16_to_cpu(record->len)); break; } ++record; @@ -421,12 +429,12 @@ static int whiteheat_attach(struct usb_serial *serial) ret = usb_bulk_msg(serial->dev, pipe, command, 2, &alen, COMMAND_TIMEOUT_MS); if (ret) { - err("%s: Couldn't send command [%d]", - serial->type->description, ret); + dev_err(&serial->dev->dev, "%s: Couldn't send command [%d]\n", + serial->type->description, ret); goto no_firmware; } else if (alen != 2) { - err("%s: Send command incomplete [%d]", - serial->type->description, alen); + dev_err(&serial->dev->dev, "%s: Send command incomplete [%d]\n", + serial->type->description, alen); goto no_firmware; } @@ -437,16 +445,16 @@ static int whiteheat_attach(struct usb_serial *serial) ret = usb_bulk_msg(serial->dev, pipe, result, sizeof(*hw_info) + 1, &alen, COMMAND_TIMEOUT_MS); if (ret) { - err("%s: Couldn't get results [%d]", - serial->type->description, ret); + dev_err(&serial->dev->dev, "%s: Couldn't get results [%d]\n", + serial->type->description, ret); goto no_firmware; } else if (alen != sizeof(*hw_info) + 1) { - err("%s: Get results incomplete [%d]", - serial->type->description, alen); + dev_err(&serial->dev->dev, "%s: Get results incomplete [%d]\n", + serial->type->description, alen); goto no_firmware; } else if (result[0] != command[0]) { - err("%s: Command failed [%d]", - serial->type->description, result[0]); + dev_err(&serial->dev->dev, "%s: Command failed [%d]\n", + serial->type->description, result[0]); goto no_firmware; } @@ -461,8 +469,9 @@ static int whiteheat_attach(struct usb_serial *serial) info = kmalloc(sizeof(struct whiteheat_private), GFP_KERNEL); if (info == NULL) { - err("%s: Out of memory for port structures\n", - serial->type->description); + dev_err(&port->dev, + "%s: Out of memory for port structures\n", + serial->type->description); goto no_private; } @@ -482,18 +491,20 @@ static int whiteheat_attach(struct usb_serial *serial) for (j = 0; j < urb_pool_size; j++) { urb = usb_alloc_urb(0, GFP_KERNEL); if (!urb) { - err("No free urbs available"); + dev_err(&port->dev, "No free urbs available\n"); goto no_rx_urb; } buf_size = port->read_urb->transfer_buffer_length; urb->transfer_buffer = kmalloc(buf_size, GFP_KERNEL); if (!urb->transfer_buffer) { - err("Couldn't allocate urb buffer"); + dev_err(&port->dev, + "Couldn't allocate urb buffer\n"); goto no_rx_buf; } wrap = kmalloc(sizeof(*wrap), GFP_KERNEL); if (!wrap) { - err("Couldn't allocate urb wrapper"); + dev_err(&port->dev, + "Couldn't allocate urb wrapper\n"); goto no_rx_wrap; } usb_fill_bulk_urb(urb, serial->dev, @@ -506,18 +517,20 @@ static int whiteheat_attach(struct usb_serial *serial) urb = usb_alloc_urb(0, GFP_KERNEL); if (!urb) { - err("No free urbs available"); + dev_err(&port->dev, "No free urbs available\n"); goto no_tx_urb; } buf_size = port->write_urb->transfer_buffer_length; urb->transfer_buffer = kmalloc(buf_size, GFP_KERNEL); if (!urb->transfer_buffer) { - err("Couldn't allocate urb buffer"); + dev_err(&port->dev, + "Couldn't allocate urb buffer\n"); goto no_tx_buf; } wrap = kmalloc(sizeof(*wrap), GFP_KERNEL); if (!wrap) { - err("Couldn't allocate urb wrapper"); + dev_err(&port->dev, + "Couldn't allocate urb wrapper\n"); goto no_tx_wrap; } usb_fill_bulk_urb(urb, serial->dev, @@ -535,8 +548,9 @@ static int whiteheat_attach(struct usb_serial *serial) command_info = kmalloc(sizeof(struct whiteheat_command_private), GFP_KERNEL); if (command_info == NULL) { - err("%s: Out of memory for port structures\n", - serial->type->description); + dev_err(&serial->dev->dev, + "%s: Out of memory for port structures\n", + serial->type->description); goto no_command_private; } @@ -553,12 +567,15 @@ static int whiteheat_attach(struct usb_serial *serial) no_firmware: /* Firmware likely not running */ - err("%s: Unable to retrieve firmware version, try replugging\n", - serial->type->description); - err("%s: If the firmware is not running (status led not blinking)\n", - serial->type->description); - err("%s: please contact support@connecttech.com\n", - serial->type->description); + dev_err(&serial->dev->dev, + "%s: Unable to retrieve firmware version, try replugging\n", + serial->type->description); + dev_err(&serial->dev->dev, + "%s: If the firmware is not running (status led not blinking)\n", + serial->type->description); + dev_err(&serial->dev->dev, + "%s: please contact support@connecttech.com\n", + serial->type->description); kfree(result); return -ENODEV; @@ -681,8 +698,9 @@ static int whiteheat_open(struct tty_struct *tty, /* Start reading from the device */ retval = start_port_read(port); if (retval) { - err("%s - failed submitting read urb, error %d", - __func__, retval); + dev_err(&port->dev, + "%s - failed submitting read urb, error %d\n", + __func__, retval); firm_close(port); stop_command_port(port->serial); goto exit; @@ -807,8 +825,9 @@ static int whiteheat_write(struct tty_struct *tty, urb->transfer_buffer_length = bytes; result = usb_submit_urb(urb, GFP_ATOMIC); if (result) { - err("%s - failed submitting write urb, error %d", - __func__, result); + dev_err(&port->dev, + "%s - failed submitting write urb, error %d\n", + __func__, result); sent = result; spin_lock_irqsave(&info->lock, flags); list_add(tmp, &info->tx_urbs_free); @@ -1076,7 +1095,7 @@ static void whiteheat_read_callback(struct urb *urb) wrap = urb_to_wrap(urb, &info->rx_urbs_submitted); if (!wrap) { spin_unlock(&info->lock); - err("%s - Not my urb!", __func__); + dev_err(&port->dev, "%s - Not my urb!\n", __func__); return; } list_del(&wrap->list); @@ -1120,7 +1139,7 @@ static void whiteheat_write_callback(struct urb *urb) wrap = urb_to_wrap(urb, &info->tx_urbs_submitted); if (!wrap) { spin_unlock(&info->lock); - err("%s - Not my urb!", __func__); + dev_err(&port->dev, "%s - Not my urb!\n", __func__); return; } list_move(&wrap->list, &info->tx_urbs_free); @@ -1384,8 +1403,9 @@ static int start_command_port(struct usb_serial *serial) command_port->read_urb->dev = serial->dev; retval = usb_submit_urb(command_port->read_urb, GFP_KERNEL); if (retval) { - err("%s - failed submitting read urb, error %d", - __func__, retval); + dev_err(&serial->dev->dev, + "%s - failed submitting read urb, error %d\n", + __func__, retval); goto exit; } } @@ -1523,7 +1543,8 @@ static void rx_data_softint(struct work_struct *work) urb->dev = port->serial->dev; result = usb_submit_urb(urb, GFP_ATOMIC); if (result) { - err("%s - failed resubmitting read urb, error %d", + dev_err(&port->dev, + "%s - failed resubmitting read urb, error %d\n", __func__, result); spin_lock_irqsave(&info->lock, flags); list_add(tmp, &info->rx_urbs_free);