From: Silvester Erdeg Date: Wed, 6 Feb 2008 09:38:12 +0000 (-0800) Subject: atmel_spi: chain DMA transfers X-Git-Tag: v2.6.25-rc1~656 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=154443c72f47169ebcb3a7befbff0e934c49bff3;p=linux-2.6-omap-h63xx.git atmel_spi: chain DMA transfers Add support for chained transfers in the atmel_spi driver, letting the DMA controller switch to the next buffer pair without CPU intervention. This reduced I/O latencies by about 2% in one bulk I/O test. It should also help work around several interrelated errata affecting chipselect 0 on at91rm9200 chips. Almost all of the changes are in the reworked atmel_spi_next_xfer() function. That's now called with the driver in one of three states: 1. It isn't transferring anything (in which case the first transfer of the current message is going to be sent) 2. It has finished transfering a non-chainable transfer (in which case it will go to the next transfer in the message) 3. It has finished transfering a chained transfer (in which case the next transfer is already queued) After that it will queue the next transfer if it can be chained. Signed-off-by: Szilveszter Ordog Acked-by: Haavard Skinnemoen Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c index b09d33678dd..545519a063b 100644 --- a/drivers/spi/atmel_spi.c +++ b/drivers/spi/atmel_spi.c @@ -51,7 +51,9 @@ struct atmel_spi { u8 stopping; struct list_head queue; struct spi_transfer *current_transfer; - unsigned long remaining_bytes; + unsigned long current_remaining_bytes; + struct spi_transfer *next_transfer; + unsigned long next_remaining_bytes; void *buffer; dma_addr_t buffer_dma; @@ -121,6 +123,48 @@ static void cs_deactivate(struct atmel_spi *as, struct spi_device *spi) gpio_set_value(gpio, !active); } +static inline int atmel_spi_xfer_is_last(struct spi_message *msg, + struct spi_transfer *xfer) +{ + return msg->transfers.prev == &xfer->transfer_list; +} + +static inline int atmel_spi_xfer_can_be_chained(struct spi_transfer *xfer) +{ + return xfer->delay_usecs == 0 && !xfer->cs_change; +} + +static void atmel_spi_next_xfer_data(struct spi_master *master, + struct spi_transfer *xfer, + dma_addr_t *tx_dma, + dma_addr_t *rx_dma, + u32 *plen) +{ + struct atmel_spi *as = spi_master_get_devdata(master); + u32 len = *plen; + + /* use scratch buffer only when rx or tx data is unspecified */ + if (xfer->rx_buf) + *rx_dma = xfer->rx_dma + xfer->len - len; + else { + *rx_dma = as->buffer_dma; + if (len > BUFFER_SIZE) + len = BUFFER_SIZE; + } + if (xfer->tx_buf) + *tx_dma = xfer->tx_dma + xfer->len - len; + else { + *tx_dma = as->buffer_dma; + if (len > BUFFER_SIZE) + len = BUFFER_SIZE; + memset(as->buffer, 0, len); + dma_sync_single_for_device(&as->pdev->dev, + as->buffer_dma, len, DMA_TO_DEVICE); + } + + *plen = len; +} + /* * Submit next transfer for DMA. * lock is held, spi irq is blocked @@ -130,53 +174,68 @@ static void atmel_spi_next_xfer(struct spi_master *master, { struct atmel_spi *as = spi_master_get_devdata(master); struct spi_transfer *xfer; - u32 len; + u32 len, remaining, total; dma_addr_t tx_dma, rx_dma; - xfer = as->current_transfer; - if (!xfer || as->remaining_bytes == 0) { - if (xfer) - xfer = list_entry(xfer->transfer_list.next, - struct spi_transfer, transfer_list); - else - xfer = list_entry(msg->transfers.next, - struct spi_transfer, transfer_list); - as->remaining_bytes = xfer->len; - as->current_transfer = xfer; - } + if (!as->current_transfer) + xfer = list_entry(msg->transfers.next, + struct spi_transfer, transfer_list); + else if (!as->next_transfer) + xfer = list_entry(as->current_transfer->transfer_list.next, + struct spi_transfer, transfer_list); + else + xfer = NULL; - len = as->remaining_bytes; + if (xfer) { + len = xfer->len; + atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len); + remaining = xfer->len - len; - tx_dma = xfer->tx_dma + xfer->len - len; - rx_dma = xfer->rx_dma + xfer->len - len; + spi_writel(as, RPR, rx_dma); + spi_writel(as, TPR, tx_dma); - /* use scratch buffer only when rx or tx data is unspecified */ - if (!xfer->rx_buf) { - rx_dma = as->buffer_dma; - if (len > BUFFER_SIZE) - len = BUFFER_SIZE; - } - if (!xfer->tx_buf) { - tx_dma = as->buffer_dma; - if (len > BUFFER_SIZE) - len = BUFFER_SIZE; - memset(as->buffer, 0, len); - dma_sync_single_for_device(&as->pdev->dev, - as->buffer_dma, len, DMA_TO_DEVICE); + if (msg->spi->bits_per_word > 8) + len >>= 1; + spi_writel(as, RCR, len); + spi_writel(as, TCR, len); + } else { + xfer = as->next_transfer; + remaining = as->next_remaining_bytes; } - spi_writel(as, RPR, rx_dma); - spi_writel(as, TPR, tx_dma); + as->current_transfer = xfer; + as->current_remaining_bytes = remaining; - as->remaining_bytes -= len; - if (msg->spi->bits_per_word > 8) - len >>= 1; + if (remaining > 0) + len = remaining; + else if (!atmel_spi_xfer_is_last(msg, xfer) && + atmel_spi_xfer_can_be_chained(xfer)) { + xfer = list_entry(xfer->transfer_list.next, + struct spi_transfer, transfer_list); + len = xfer->len; + } else + xfer = NULL; - /* REVISIT: when xfer->delay_usecs == 0, the PDC "next transfer" - * mechanism might help avoid the IRQ latency between transfers - * (and improve the nCS0 errata handling on at91rm9200 chips) - * - * We're also waiting for ENDRX before we start the next + as->next_transfer = xfer; + + if (xfer) { + total = len; + atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len); + as->next_remaining_bytes = total - len; + + spi_writel(as, RNPR, rx_dma); + spi_writel(as, TNPR, tx_dma); + + if (msg->spi->bits_per_word > 8) + len >>= 1; + spi_writel(as, RNCR, len); + spi_writel(as, TNCR, len); + } else { + spi_writel(as, RNCR, 0); + spi_writel(as, TNCR, 0); + } + + /* REVISIT: We're waiting for ENDRX before we start the next * transfer because we need to handle some difficult timing * issues otherwise. If we wait for ENDTX in one transfer and * then starts waiting for ENDRX in the next, it's difficult @@ -186,8 +245,6 @@ static void atmel_spi_next_xfer(struct spi_master *master, * * It should be doable, though. Just not now... */ - spi_writel(as, TNCR, 0); - spi_writel(as, RNCR, 0); spi_writel(as, IER, SPI_BIT(ENDRX) | SPI_BIT(OVRES)); dev_dbg(&msg->spi->dev, @@ -195,8 +252,6 @@ static void atmel_spi_next_xfer(struct spi_master *master, xfer, xfer->len, xfer->tx_buf, xfer->tx_dma, xfer->rx_buf, xfer->rx_dma, spi_readl(as, IMR)); - spi_writel(as, RCR, len); - spi_writel(as, TCR, len); spi_writel(as, PTCR, SPI_BIT(TXTEN) | SPI_BIT(RXTEN)); } @@ -294,6 +349,7 @@ atmel_spi_msg_done(struct spi_master *master, struct atmel_spi *as, spin_lock(&as->lock); as->current_transfer = NULL; + as->next_transfer = NULL; /* continue if needed */ if (list_empty(&as->queue) || as->stopping) @@ -377,7 +433,7 @@ atmel_spi_interrupt(int irq, void *dev_id) spi_writel(as, IDR, pending); - if (as->remaining_bytes == 0) { + if (as->current_remaining_bytes == 0) { msg->actual_length += xfer->len; if (!msg->is_dma_mapped) @@ -387,7 +443,7 @@ atmel_spi_interrupt(int irq, void *dev_id) if (xfer->delay_usecs) udelay(xfer->delay_usecs); - if (msg->transfers.prev == &xfer->transfer_list) { + if (atmel_spi_xfer_is_last(msg, xfer)) { /* report completed message */ atmel_spi_msg_done(master, as, msg, 0, xfer->cs_change);