From: Bartlomiej Zolnierkiewicz Date: Tue, 24 Mar 2009 22:22:47 +0000 (+0100) Subject: ide: checkpatch.pl fixes for ide-iops.c X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=122f06f8bce406169d61242a3eb667027e27cca7;p=linux-2.6-omap-h63xx.git ide: checkpatch.pl fixes for ide-iops.c Fix following checkpatch.pl warnings/errors: - WARNING: space prohibited between function name and open parenthesis '(' - WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable - WARNING: line over 80 characters - ERROR: trailing whitespace - ERROR: space required before the open parenthesis '(' Signed-off-by: Bartlomiej Zolnierkiewicz --- diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 73ff16bf9f1..cf6c3036ae7 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -27,7 +27,7 @@ #include #include -void SELECT_DRIVE (ide_drive_t *drive) +void SELECT_DRIVE(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; const struct ide_port_ops *port_ops = hwif->port_ops; @@ -84,7 +84,7 @@ void ide_fix_driveid(u16 *id) * returned by the ATA_CMD_ID_ATA[PI] commands. */ -void ide_fixstring (u8 *s, const int bytecount, const int byteswap) +void ide_fixstring(u8 *s, const int bytecount, const int byteswap) { u8 *p, *end = &s[bytecount & ~1]; /* bytecount must be even */ @@ -107,7 +107,6 @@ void ide_fixstring (u8 *s, const int bytecount, const int byteswap) while (p != end) *p++ = '\0'; } - EXPORT_SYMBOL(ide_fixstring); /* @@ -121,7 +120,8 @@ EXPORT_SYMBOL(ide_fixstring); * setting a timer to wake up at half second intervals thereafter, * until timeout is achieved, before timing out. */ -static int __ide_wait_stat(ide_drive_t *drive, u8 good, u8 bad, unsigned long timeout, u8 *rstat) +static int __ide_wait_stat(ide_drive_t *drive, u8 good, u8 bad, + unsigned long timeout, u8 *rstat) { ide_hwif_t *hwif = drive->hwif; const struct ide_tp_ops *tp_ops = hwif->tp_ops; @@ -179,7 +179,8 @@ static int __ide_wait_stat(ide_drive_t *drive, u8 good, u8 bad, unsigned long ti * The caller should return the updated value of "startstop" in this case, * "startstop" is unchanged when the function returns 0. */ -int ide_wait_stat(ide_startstop_t *startstop, ide_drive_t *drive, u8 good, u8 bad, unsigned long timeout) +int ide_wait_stat(ide_startstop_t *startstop, ide_drive_t *drive, u8 good, + u8 bad, unsigned long timeout) { int err; u8 stat; @@ -199,7 +200,6 @@ int ide_wait_stat(ide_startstop_t *startstop, ide_drive_t *drive, u8 good, u8 ba return err; } - EXPORT_SYMBOL(ide_wait_stat); /** @@ -220,7 +220,6 @@ int ide_in_drive_list(u16 *id, const struct drive_list_entry *table) return 1; return 0; } - EXPORT_SYMBOL_GPL(ide_in_drive_list); /* @@ -245,7 +244,7 @@ static const struct drive_list_entry ivb_list[] = { * All hosts that use the 80c ribbon must use! * The name is derived from upper byte of word 93 and the 80c ribbon. */ -u8 eighty_ninty_three (ide_drive_t *drive) +u8 eighty_ninty_three(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; u16 *id = drive->id; @@ -470,9 +469,8 @@ void ide_set_handler (ide_drive_t *drive, ide_handler_t *handler, __ide_set_handler(drive, handler, timeout, expiry); spin_unlock_irqrestore(&hwif->lock, flags); } - EXPORT_SYMBOL(ide_set_handler); - + /** * ide_execute_command - execute an IDE command * @drive: IDE drive to issue the command against @@ -482,7 +480,7 @@ EXPORT_SYMBOL(ide_set_handler); * @expiry: handler to run on timeout * * Helper function to issue an IDE command. This handles the - * atomicity requirements, command timing and ensures that the + * atomicity requirements, command timing and ensures that the * handler and IRQ setup do not race. All IDE command kick off * should go via this function or do equivalent locking. */ @@ -528,28 +526,29 @@ static inline void ide_complete_drive_reset(ide_drive_t *drive, int err) } /* needed below */ -static ide_startstop_t do_reset1 (ide_drive_t *, int); +static ide_startstop_t do_reset1(ide_drive_t *, int); /* - * atapi_reset_pollfunc() gets invoked to poll the interface for completion every 50ms - * during an atapi drive reset operation. If the drive has not yet responded, - * and we have not yet hit our maximum waiting time, then the timer is restarted - * for another 50ms. + * atapi_reset_pollfunc() gets invoked to poll the interface for completion + * every 50ms during an atapi drive reset operation. If the drive has not yet + * responded, and we have not yet hit our maximum waiting time, then the timer + * is restarted for another 50ms. */ -static ide_startstop_t atapi_reset_pollfunc (ide_drive_t *drive) +static ide_startstop_t atapi_reset_pollfunc(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; u8 stat; SELECT_DRIVE(drive); - udelay (10); + udelay(10); stat = hwif->tp_ops->read_status(hwif); if (OK_STAT(stat, 0, ATA_BUSY)) printk(KERN_INFO "%s: ATAPI reset complete\n", drive->name); else { if (time_before(jiffies, hwif->poll_timeout)) { - ide_set_handler(drive, &atapi_reset_pollfunc, HZ/20, NULL); + ide_set_handler(drive, &atapi_reset_pollfunc, HZ/20, + NULL); /* continue polling */ return ide_started; } @@ -591,7 +590,7 @@ static void ide_reset_report_error(ide_hwif_t *hwif, u8 err) * and we have not yet hit our maximum waiting time, then the timer is restarted * for another 50ms. */ -static ide_startstop_t reset_pollfunc (ide_drive_t *drive) +static ide_startstop_t reset_pollfunc(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; const struct ide_port_ops *port_ops = hwif->port_ops; @@ -703,7 +702,7 @@ static void pre_reset(ide_drive_t *drive) * (up to 30 seconds worstcase). So, instead of busy-waiting here for it, * we set a timer to poll at 50ms intervals. */ -static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi) +static ide_startstop_t do_reset1(ide_drive_t *drive, int do_not_try_atapi) { ide_hwif_t *hwif = drive->hwif; struct ide_io_ports *io_ports = &hwif->io_ports; @@ -723,7 +722,7 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi) if (drive->media != ide_disk && !do_not_try_atapi) { pre_reset(drive); SELECT_DRIVE(drive); - udelay (20); + udelay(20); tp_ops->exec_command(hwif, ATA_CMD_DEV_RESET); ndelay(400); hwif->poll_timeout = jiffies + WAIT_WORSTCASE; @@ -807,11 +806,10 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi) * ide_do_reset() is the entry point to the drive/interface reset code. */ -ide_startstop_t ide_do_reset (ide_drive_t *drive) +ide_startstop_t ide_do_reset(ide_drive_t *drive) { return do_reset1(drive, 0); } - EXPORT_SYMBOL(ide_do_reset); /* @@ -822,7 +820,7 @@ int ide_wait_not_busy(ide_hwif_t *hwif, unsigned long timeout) { u8 stat = 0; - while(timeout--) { + while (timeout--) { /* * Turn this into a schedule() sleep once I'm sure * about locking issues (2.5 work ?).