From: Hannes Eder Date: Fri, 26 Dec 2008 08:13:46 +0000 (-0800) Subject: drivers/net/wireless/b43: fix sparse warnings: make symbols static X-Git-Tag: v2.6.29-rc1~581^2~32 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=11ab72a7c94f3ccac05b85928875fdc4f1ed5e9b;p=linux-2.6-omap-h63xx.git drivers/net/wireless/b43: fix sparse warnings: make symbols static Fix this sparse warnings: drivers/net/wireless/b43/phy_a.c:80:6: warning: symbol 'b43_radio_set_tx_iq' was not declared. Should it be static? drivers/net/wireless/b43/phy_a.c:150:6: warning: symbol 'b43_radio_init2060' was not declared. Should it be static? drivers/net/wireless/b43/phy_g.c:57:10: warning: symbol 'b43_radio_channel_codes_bg' was not declared. Should it be static? drivers/net/wireless/b43/phy_g.c:218:6: warning: symbol 'b43_set_txpower_g' was not declared. Should it be static? drivers/net/wireless/b43/phy_g.c:386:6: warning: symbol 'b43_nrssi_hw_write' was not declared. Should it be static? drivers/net/wireless/b43/phy_g.c:393:5: warning: symbol 'b43_nrssi_hw_read' was not declared. Should it be static? drivers/net/wireless/b43/phy_g.c:404:6: warning: symbol 'b43_nrssi_hw_update' was not declared. Should it be static? drivers/net/wireless/b43/phy_g.c:418:6: warning: symbol 'b43_nrssi_mem_update' was not declared. Should it be static? drivers/net/wireless/b43/phy_g.c:592:6: warning: symbol 'b43_calc_nrssi_slope' was not declared. Should it be static? drivers/net/wireless/b43/phy_g.c:1357:5: warning: symbol 'b43_radio_init2050' was not declared. Should it be static? Signed-off-by: Hannes Eder Signed-off-by: David S. Miller --- diff --git a/drivers/net/wireless/b43/phy_a.c b/drivers/net/wireless/b43/phy_a.c index 0f1a84c9de6..7fe9d170162 100644 --- a/drivers/net/wireless/b43/phy_a.c +++ b/drivers/net/wireless/b43/phy_a.c @@ -77,7 +77,7 @@ static s8 b43_aphy_estimate_power_out(struct b43_wldev *dev, s8 tssi) } #endif -void b43_radio_set_tx_iq(struct b43_wldev *dev) +static void b43_radio_set_tx_iq(struct b43_wldev *dev) { static const u8 data_high[5] = { 0x00, 0x40, 0x80, 0x90, 0xD0 }; static const u8 data_low[5] = { 0x00, 0x01, 0x05, 0x06, 0x0A }; @@ -147,7 +147,7 @@ static void aphy_channel_switch(struct b43_wldev *dev, unsigned int channel) //FIXME b43_phy_xmitpower(dev); } -void b43_radio_init2060(struct b43_wldev *dev) +static void b43_radio_init2060(struct b43_wldev *dev) { b43_radio_write16(dev, 0x0004, 0x00C0); b43_radio_write16(dev, 0x0005, 0x0008); diff --git a/drivers/net/wireless/b43/phy_g.c b/drivers/net/wireless/b43/phy_g.c index 3b1d673796c..caac4a45f0b 100644 --- a/drivers/net/wireless/b43/phy_g.c +++ b/drivers/net/wireless/b43/phy_g.c @@ -54,7 +54,7 @@ static const s8 b43_tssi2dbm_g_table[] = { -20, -20, -20, -20, }; -const u8 b43_radio_channel_codes_bg[] = { +static const u8 b43_radio_channel_codes_bg[] = { 12, 17, 22, 27, 32, 37, 42, 47, 52, 57, 62, 67, @@ -215,9 +215,9 @@ void b43_gphy_set_baseband_attenuation(struct b43_wldev *dev, } /* Adjust the transmission power output (G-PHY) */ -void b43_set_txpower_g(struct b43_wldev *dev, - const struct b43_bbatt *bbatt, - const struct b43_rfatt *rfatt, u8 tx_control) +static void b43_set_txpower_g(struct b43_wldev *dev, + const struct b43_bbatt *bbatt, + const struct b43_rfatt *rfatt, u8 tx_control) { struct b43_phy *phy = &dev->phy; struct b43_phy_g *gphy = phy->g; @@ -383,14 +383,14 @@ static void b43_set_original_gains(struct b43_wldev *dev) } /* http://bcm-specs.sipsolutions.net/NRSSILookupTable */ -void b43_nrssi_hw_write(struct b43_wldev *dev, u16 offset, s16 val) +static void b43_nrssi_hw_write(struct b43_wldev *dev, u16 offset, s16 val) { b43_phy_write(dev, B43_PHY_NRSSILT_CTRL, offset); b43_phy_write(dev, B43_PHY_NRSSILT_DATA, (u16) val); } /* http://bcm-specs.sipsolutions.net/NRSSILookupTable */ -s16 b43_nrssi_hw_read(struct b43_wldev *dev, u16 offset) +static s16 b43_nrssi_hw_read(struct b43_wldev *dev, u16 offset) { u16 val; @@ -401,7 +401,7 @@ s16 b43_nrssi_hw_read(struct b43_wldev *dev, u16 offset) } /* http://bcm-specs.sipsolutions.net/NRSSILookupTable */ -void b43_nrssi_hw_update(struct b43_wldev *dev, u16 val) +static void b43_nrssi_hw_update(struct b43_wldev *dev, u16 val) { u16 i; s16 tmp; @@ -415,7 +415,7 @@ void b43_nrssi_hw_update(struct b43_wldev *dev, u16 val) } /* http://bcm-specs.sipsolutions.net/NRSSILookupTable */ -void b43_nrssi_mem_update(struct b43_wldev *dev) +static void b43_nrssi_mem_update(struct b43_wldev *dev) { struct b43_phy_g *gphy = dev->phy.g; s16 i, delta; @@ -589,7 +589,7 @@ static void b43_calc_nrssi_offset(struct b43_wldev *dev) b43_phy_write(dev, 0x0811, backup[1]); } -void b43_calc_nrssi_slope(struct b43_wldev *dev) +static void b43_calc_nrssi_slope(struct b43_wldev *dev) { struct b43_phy *phy = &dev->phy; struct b43_phy_g *gphy = phy->g; @@ -1354,7 +1354,7 @@ struct init2050_saved_values { u16 phy_syncctl; }; -u16 b43_radio_init2050(struct b43_wldev *dev) +static u16 b43_radio_init2050(struct b43_wldev *dev) { struct b43_phy *phy = &dev->phy; struct init2050_saved_values sav;