From: Andrea Merello Date: Sat, 10 May 2008 11:32:34 +0000 (+0200) Subject: rtl8180: fix wrong parameter in max2820_rf_set_channel X-Git-Tag: v2.6.26-rc5~34^2~2^2~18 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=0a0ab41e833c8184c6d4ab663f137d5bbd50e049;p=linux-2.6-omap-h63xx.git rtl8180: fix wrong parameter in max2820_rf_set_channel The max2820 RF code needs to invoke max2820_write_phy_antenna every time the channel is being switch. This should be done passing the channel number to that function. Incorrectly we were passing the same value that is written on the channel RF register. This may cause problems when operating on ch 14. This patch fixes it. Thanks to Alessandro Di Marco who found this issue! Signed-off-by: Andrea Merello Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/rtl8180_max2820.c b/drivers/net/wireless/rtl8180_max2820.c index a140c802264..6c825fd7f3b 100644 --- a/drivers/net/wireless/rtl8180_max2820.c +++ b/drivers/net/wireless/rtl8180_max2820.c @@ -88,7 +88,7 @@ static void max2820_rf_set_channel(struct ieee80211_hw *dev, * sa2400, for MAXIM we do this directly from BB */ rtl8180_write_phy(dev, 3, txpw); - max2820_write_phy_antenna(dev, chan); + max2820_write_phy_antenna(dev, channel); write_max2820(dev, 3, chan); }