From: Larry Finger Date: Tue, 19 Aug 2008 17:50:31 +0000 (-0500) Subject: ssb: Update for Rev. 5 SPROM X-Git-Tag: v2.6.28-rc1~717^2~384^2~32 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=095f695cbb07281682462da0618fffabb499d0be;p=linux-2.6-omap-h63xx.git ssb: Update for Rev. 5 SPROM Although a revision 5 SPROM has not been seen in the wild, the open-source portion of the MIPS driver 4.150.10.5 describes its layout, which is mostly inherited from revision 4. This patch implements the differences. Signed-off-by: Larry Finger Acked-by: Michael Buesch Signed-off-by: John W. Linville --- diff --git a/drivers/ssb/pci.c b/drivers/ssb/pci.c index f883dcfffe0..0de4b5e0450 100644 --- a/drivers/ssb/pci.c +++ b/drivers/ssb/pci.c @@ -399,14 +399,19 @@ static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in) out->antenna_gain.ghz5.a3 = gain; } -static void sprom_extract_r4(struct ssb_sprom *out, const u16 *in) +static void sprom_extract_r45(struct ssb_sprom *out, const u16 *in) { int i; u16 v; + u16 il0mac_offset; + if (out->revision == 4) + il0mac_offset = SSB_SPROM4_IL0MAC; + else + il0mac_offset = SSB_SPROM5_IL0MAC; /* extract the equivalent of the r1 variables */ for (i = 0; i < 3; i++) { - v = in[SPOFF(SSB_SPROM4_IL0MAC) + i]; + v = in[SPOFF(il0mac_offset) + i]; *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v); } for (i = 0; i < 3; i++) { @@ -420,9 +425,15 @@ static void sprom_extract_r4(struct ssb_sprom *out, const u16 *in) SPEX(et0phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET0A, 0); SPEX(et1phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET1A, SSB_SPROM4_ETHPHY_ET1A_SHIFT); - SPEX(country_code, SSB_SPROM4_CCODE, 0xFFFF, 0); - SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0); - SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0); + if (out->revision == 4) { + SPEX(country_code, SSB_SPROM4_CCODE, 0xFFFF, 0); + SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0); + SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0); + } else { + SPEX(country_code, SSB_SPROM5_CCODE, 0xFFFF, 0); + SPEX(boardflags_lo, SSB_SPROM5_BFLLO, 0xFFFF, 0); + SPEX(boardflags_hi, SSB_SPROM5_BFLHI, 0xFFFF, 0); + } SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A, SSB_SPROM4_ANTAVAIL_A_SHIFT); SPEX(ant_available_bg, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_BG, @@ -433,12 +444,21 @@ static void sprom_extract_r4(struct ssb_sprom *out, const u16 *in) SPEX(maxpwr_a, SSB_SPROM4_MAXP_A, SSB_SPROM4_MAXP_A_MASK, 0); SPEX(itssi_a, SSB_SPROM4_MAXP_A, SSB_SPROM4_ITSSI_A, SSB_SPROM4_ITSSI_A_SHIFT); - SPEX(gpio0, SSB_SPROM4_GPIOA, SSB_SPROM4_GPIOA_P0, 0); - SPEX(gpio1, SSB_SPROM4_GPIOA, SSB_SPROM4_GPIOA_P1, - SSB_SPROM4_GPIOA_P1_SHIFT); - SPEX(gpio2, SSB_SPROM4_GPIOB, SSB_SPROM4_GPIOB_P2, 0); - SPEX(gpio3, SSB_SPROM4_GPIOB, SSB_SPROM4_GPIOB_P3, - SSB_SPROM4_GPIOB_P3_SHIFT); + if (out->revision == 4) { + SPEX(gpio0, SSB_SPROM4_GPIOA, SSB_SPROM4_GPIOA_P0, 0); + SPEX(gpio1, SSB_SPROM4_GPIOA, SSB_SPROM4_GPIOA_P1, + SSB_SPROM4_GPIOA_P1_SHIFT); + SPEX(gpio2, SSB_SPROM4_GPIOB, SSB_SPROM4_GPIOB_P2, 0); + SPEX(gpio3, SSB_SPROM4_GPIOB, SSB_SPROM4_GPIOB_P3, + SSB_SPROM4_GPIOB_P3_SHIFT); + } else { + SPEX(gpio0, SSB_SPROM5_GPIOA, SSB_SPROM5_GPIOA_P0, 0); + SPEX(gpio1, SSB_SPROM5_GPIOA, SSB_SPROM5_GPIOA_P1, + SSB_SPROM5_GPIOA_P1_SHIFT); + SPEX(gpio2, SSB_SPROM5_GPIOB, SSB_SPROM5_GPIOB_P2, 0); + SPEX(gpio3, SSB_SPROM5_GPIOB, SSB_SPROM5_GPIOB_P3, + SSB_SPROM5_GPIOB_P3_SHIFT); + } /* Extract the antenna gain values. */ SPEX(antenna_gain.ghz24.a0, SSB_SPROM4_AGAIN01, @@ -471,16 +491,16 @@ static int sprom_extract(struct ssb_bus *bus, struct ssb_sprom *out, } else if (bus->chip_id == 0x4321) { /* the BCM4328 has a chipid == 0x4321 and a rev 4 SPROM */ out->revision = 4; - sprom_extract_r4(out, in); + sprom_extract_r45(out, in); } else { if (out->revision == 0) goto unsupported; if (out->revision >= 1 && out->revision <= 3) { sprom_extract_r123(out, in); } - if (out->revision == 4) - sprom_extract_r4(out, in); - if (out->revision >= 5) + if (out->revision == 4 || out->revision == 5) + sprom_extract_r45(out, in); + if (out->revision > 5) goto unsupported; } diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h index ebad0bac980..271bb4b6446 100644 --- a/include/linux/ssb/ssb_regs.h +++ b/include/linux/ssb/ssb_regs.h @@ -316,6 +316,21 @@ #define SSB_SPROM4_PA1B1 0x1090 #define SSB_SPROM4_PA1B2 0x1092 +/* SPROM Revision 5 (inherits most data from rev 4) */ +#define SSB_SPROM5_BFLLO 0x104A /* Boardflags (low 16 bits) */ +#define SSB_SPROM5_BFLHI 0x104C /* Board Flags Hi */ +#define SSB_SPROM5_IL0MAC 0x1052 /* 6 byte MAC address for a/b/g/n */ +#define SSB_SPROM5_CCODE 0x1044 /* Country Code (2 bytes) */ +#define SSB_SPROM5_GPIOA 0x1076 /* Gen. Purpose IO # 0 and 1 */ +#define SSB_SPROM5_GPIOA_P0 0x00FF /* Pin 0 */ +#define SSB_SPROM5_GPIOA_P1 0xFF00 /* Pin 1 */ +#define SSB_SPROM5_GPIOA_P1_SHIFT 8 +#define SSB_SPROM5_GPIOB 0x1078 /* Gen. Purpose IO # 2 and 3 */ +#define SSB_SPROM5_GPIOB_P2 0x00FF /* Pin 2 */ +#define SSB_SPROM5_GPIOB_P3 0xFF00 /* Pin 3 */ +#define SSB_SPROM5_GPIOB_P3_SHIFT 8 + + /* Values for SSB_SPROM1_BINF_CCODE */ enum { SSB_SPROM1CCODE_WORLD = 0,