From: Martyn Welch Date: Tue, 18 Nov 2008 10:55:45 +0000 (+0000) Subject: powerpc: Use generic PHY driver for Marvell 88E1111 PHY on GE Fanuc SBC610 X-Git-Tag: v2.6.28-rc7~37^2~10 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=06597aa90a75621639dcaaf5fc07bcb01f752d45;p=linux-2.6-omap-h63xx.git powerpc: Use generic PHY driver for Marvell 88E1111 PHY on GE Fanuc SBC610 The Marvell PHY driver is currently being used for the 88E1111 on the SBC610. This driver is causing the link to run in 10/Half mode, the generic PHY driver is correctly configuring the PHY as 1000/Full. Edit default config to use generic PHY driver. Signed-off-by: Martyn Welch Signed-off-by: Kumar Gala --- diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig index 2da13e00a80..07ccaf89f37 100644 --- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig +++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig @@ -838,7 +838,7 @@ CONFIG_PHYLIB=y # # MII PHY device drivers # -CONFIG_MARVELL_PHY=y +# CONFIG_MARVELL_PHY is not set # CONFIG_DAVICOM_PHY is not set # CONFIG_QSEMI_PHY is not set # CONFIG_LXT_PHY is not set