From: Chandra shekhar <x0044955@ti.com>
Date: Fri, 16 Nov 2007 13:46:52 +0000 (+0530)
Subject: I2C and TWL4030 suport on 34xx
X-Git-Tag: v2.6.24-omap1~209
X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=033a23d1f5114f692c7772feea24c328097689bb;p=linux-2.6-omap-h63xx.git

I2C and TWL4030 suport on 34xx

Resubmitting the I2C patch for 3430, after Jarkko's I2C registration helper changes.

Signed-off-by: chandra shekhar <x0044955@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---

diff --git a/arch/arm/configs/omap_3430sdp_defconfig b/arch/arm/configs/omap_3430sdp_defconfig
index 8278bd858d9..5f718f69717 100644
--- a/arch/arm/configs/omap_3430sdp_defconfig
+++ b/arch/arm/configs/omap_3430sdp_defconfig
@@ -601,7 +601,10 @@ CONFIG_HW_RANDOM=y
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_OMAP=y
 
 #
 # SPI support
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 7b65e19896d..50f05ca7dbb 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -167,6 +167,13 @@ static struct omap_uart_config sdp3430_uart_config __initdata = {
 static struct omap_board_config_kernel sdp3430_config[] = {
 	{ OMAP_TAG_UART,	&sdp3430_uart_config },
 };
+static int __init omap3430_i2c_init(void)
+{
+	omap_register_i2c_bus(1, 2600, NULL, 0);
+	omap_register_i2c_bus(2, 400, NULL, 0);
+	omap_register_i2c_bus(3, 400, NULL, 0);
+	return 0;
+}
 
 static void __init omap_3430sdp_init(void)
 {
@@ -180,6 +187,7 @@ static void __init omap_3430sdp_map_io(void)
 {
 	omap2_map_common_io();
 }
+arch_initcall(omap3430_i2c_init);
 
 MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
 	/* Maintainer: Syed Khasim - Texas Instruments Inc */
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index b771a5d7b1a..237a168963c 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -88,7 +88,7 @@ static void omap_i2c_mux_pins(int bus_id)
 		if (cpu_class_is_omap1()) {
 			omap_cfg_reg(I2C_SCL);
 			omap_cfg_reg(I2C_SDA);
-		} else if (cpu_class_is_omap2()) {
+		} else if (cpu_is_omap24xx()) {
 			omap_cfg_reg(M19_24XX_I2C1_SCL);
 			omap_cfg_reg(L15_24XX_I2C1_SDA);
 		}
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 1441ac87dbc..94c29135e55 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -160,7 +160,7 @@ static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg)
 
 static int omap_i2c_get_clocks(struct omap_i2c_dev *dev)
 {
-	if (cpu_is_omap16xx() || cpu_is_omap24xx()) {
+	if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
 		dev->iclk = clk_get(dev->dev, "i2c_ick");
 		if (IS_ERR(dev->iclk)) {
 			dev->iclk = NULL;
@@ -265,7 +265,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
 			psc = fclk_rate / 12000000;
 	}
 
-	if (cpu_is_omap2430()) {
+	if (cpu_is_omap2430() || cpu_is_omap34xx()) {
 
 		/* HSI2C controller internal clk rate should be 19.2 Mhz */
 		internal_clk = 19200;
@@ -603,10 +603,9 @@ omap_i2c_isr(int this_irq, void *dev_id)
 				if (dev->buf_len) {
 					*dev->buf++ = w;
 					dev->buf_len--;
-					/*
-					 * Data reg in 2430 is 8 bit wide,
-					 */
-					if (!cpu_is_omap2430()) {
+					/* Data reg from 2430 is 8 bit wide */
+					if (!cpu_is_omap2430() &&
+							!cpu_is_omap34xx()) {
 						if (dev->buf_len) {
 							*dev->buf++ = w >> 8;
 							dev->buf_len--;
@@ -637,10 +636,9 @@ omap_i2c_isr(int this_irq, void *dev_id)
 				if (dev->buf_len) {
 					w = *dev->buf++;
 					dev->buf_len--;
-					/*
-					 * Data reg in 2430 is 8 bit wide,
-					 */
-					if (!cpu_is_omap2430()) {
+					/* Data reg from  2430 is 8 bit wide */
+					if (!cpu_is_omap2430() &&
+							!cpu_is_omap34xx()) {
 						if (dev->buf_len) {
 							w |= *dev->buf++ << 8;
 							dev->buf_len--;
@@ -740,7 +738,7 @@ omap_i2c_probe(struct platform_device *pdev)
 	if (cpu_is_omap15xx())
 		dev->rev1 = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) < 0x20;
 
-	if (cpu_is_omap2430()) {
+	if (cpu_is_omap2430() || cpu_is_omap34xx()) {
 		/* Set up the fifo size - Get total size */
 		dev->fifo_size = 0x8 <<
 			((omap_i2c_read_reg(dev, OMAP_I2C_BUFSTAT_REG) >> 14) & 0x3);