]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
[PATCH] USB: usbtest updates
authorDavid Brownell <david-b@pacbell.net>
Fri, 22 Apr 2005 20:17:00 +0000 (13:17 -0700)
committerGreg Kroah-Hartman <gregkh@suse.de>
Mon, 27 Jun 2005 21:43:46 +0000 (14:43 -0700)
Updates to "usbtest" driver:

  * Improve some diagnostics.  One path that never generated diagnostics
    before should now generate two ... unless you hit a GCC bug that
    all my compilers seem to have, go figure.

  * Add suspend/resume support, so this behaves when the Linux host
    being used for testing suspends.

  * Don't test the "zero byte ep0 read" case unless real-world relevance
    for the testing is is irrelevant.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/usb/misc/usbtest.c

index 3104f28f6aa8d130206cacdaf7999cbf63e48f1f..cda7249a90b285225df15bb99b2d3af6e5b91589 100644 (file)
@@ -461,7 +461,7 @@ static int perform_sglist (
 
 static unsigned realworld = 1;
 module_param (realworld, uint, 0);
-MODULE_PARM_DESC (realworld, "clear to demand stricter ch9 compliance");
+MODULE_PARM_DESC (realworld, "clear to demand stricter spec compliance");
 
 static int get_altsetting (struct usbtest_dev *dev)
 {
@@ -604,9 +604,8 @@ static int ch9_postconfig (struct usbtest_dev *dev)
                                USB_DIR_IN | USB_RECIP_DEVICE,
                                0, 0, dev->buf, 1, USB_CTRL_GET_TIMEOUT);
                if (retval != 1 || dev->buf [0] != expected) {
-                       dev_dbg (&iface->dev,
-                               "get config --> %d (%d)\n", retval,
-                               expected);
+                       dev_dbg (&iface->dev, "get config --> %d %d (1 %d)\n",
+                               retval, dev->buf[0], expected);
                        return (retval < 0) ? retval : -EDOM;
                }
        }
@@ -1243,7 +1242,7 @@ static int ctrl_out (struct usbtest_dev *dev,
        char                    *what = "?";
        struct usb_device       *udev;
        
-       if (length > 0xffff || vary >= length)
+       if (length < 1 || length > 0xffff || vary >= length)
                return -EINVAL;
 
        buf = kmalloc(length, SLAB_KERNEL);
@@ -1266,6 +1265,11 @@ static int ctrl_out (struct usbtest_dev *dev,
                                0, 0, buf, len, USB_CTRL_SET_TIMEOUT);
                if (retval != len) {
                        what = "write";
+                       if (retval >= 0) {
+                               INFO(dev, "ctrl_out, wlen %d (expected %d)\n",
+                                               retval, len);
+                               retval = -EBADMSG;
+                       }
                        break;
                }
 
@@ -1275,6 +1279,11 @@ static int ctrl_out (struct usbtest_dev *dev,
                                0, 0, buf, len, USB_CTRL_GET_TIMEOUT);
                if (retval != len) {
                        what = "read";
+                       if (retval >= 0) {
+                               INFO(dev, "ctrl_out, rlen %d (expected %d)\n",
+                                               retval, len);
+                               retval = -EBADMSG;
+                       }
                        break;
                }
 
@@ -1293,8 +1302,13 @@ static int ctrl_out (struct usbtest_dev *dev,
                }
 
                len += vary;
+
+               /* [real world] the "zero bytes IN" case isn't really used.
+                * hardware can easily trip up in this wierd case, since its
+                * status stage is IN, not OUT like other ep0in transfers.
+                */
                if (len > length)
-                       len = 0;
+                       len = realworld ? 1 : 0;
        }
 
        if (retval < 0)
@@ -1519,6 +1533,11 @@ usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf)
        if (down_interruptible (&dev->sem))
                return -ERESTARTSYS;
 
+       if (intf->dev.power.power_state != PMSG_ON) {
+               up (&dev->sem);
+               return -EHOSTUNREACH;
+       }
+
        /* some devices, like ez-usb default devices, need a non-default
         * altsetting to have any active endpoints.  some tests change
         * altsettings; force a default so most tests don't need to check.
@@ -1762,8 +1781,10 @@ usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf)
        case 14:
                if (!dev->info->ctrl_out)
                        break;
-               dev_dbg (&intf->dev, "TEST 14:  %d ep0out, 0..%d vary %d\n",
-                               param->iterations, param->length, param->vary);
+               dev_dbg (&intf->dev, "TEST 14:  %d ep0out, %d..%d vary %d\n",
+                               param->iterations,
+                               realworld ? 1 : 0, param->length,
+                               param->vary);
                retval = ctrl_out (dev, param->iterations, 
                                param->length, param->vary);
                break;
@@ -1927,6 +1948,27 @@ usbtest_probe (struct usb_interface *intf, const struct usb_device_id *id)
        return 0;
 }
 
+static int usbtest_suspend (struct usb_interface *intf, pm_message_t message)
+{
+       struct usbtest_dev      *dev = usb_get_intfdata (intf);
+
+       down (&dev->sem);
+       intf->dev.power.power_state = PMSG_SUSPEND;
+       up (&dev->sem);
+       return 0;
+}
+
+static int usbtest_resume (struct usb_interface *intf)
+{
+       struct usbtest_dev      *dev = usb_get_intfdata (intf);
+
+       down (&dev->sem);
+       intf->dev.power.power_state = PMSG_ON;
+       up (&dev->sem);
+       return 0;
+}
+
+
 static void usbtest_disconnect (struct usb_interface *intf)
 {
        struct usbtest_dev      *dev = usb_get_intfdata (intf);
@@ -2115,6 +2157,8 @@ static struct usb_driver usbtest_driver = {
        .probe =        usbtest_probe,
        .ioctl =        usbtest_ioctl,
        .disconnect =   usbtest_disconnect,
+       .suspend =      usbtest_suspend,
+       .resume =       usbtest_resume,
 };
 
 /*-------------------------------------------------------------------------*/