--- /dev/null
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?>
+
+<cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+ <storageModule moduleId="org.eclipse.cdt.core.settings">
+ <cconfiguration id="cdt.managedbuild.config.gnu.exe.debug.1197314700">
+ <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="cdt.managedbuild.config.gnu.exe.debug.1197314700" moduleId="org.eclipse.cdt.core.settings" name="Debug">
+ <externalSettings/>
+ <extensions>
+ <extension id="org.eclipse.cdt.core.ELF" point="org.eclipse.cdt.core.BinaryParser"/>
+ <extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ </extensions>
+ </storageModule>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <configuration artifactName="${ProjName}" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildType=org.eclipse.cdt.build.core.buildType.debug,org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe" cleanCommand="rm -rf" description="" id="cdt.managedbuild.config.gnu.exe.debug.1197314700" name="Debug" parent="cdt.managedbuild.config.gnu.exe.debug">
+ <folderInfo id="cdt.managedbuild.config.gnu.exe.debug.1197314700." name="/" resourcePath="">
+ <toolChain id="cdt.managedbuild.toolchain.gnu.exe.debug.1864928771" name="Linux GCC" superClass="cdt.managedbuild.toolchain.gnu.exe.debug">
+ <targetPlatform id="cdt.managedbuild.target.gnu.platform.exe.debug.693951810" name="Debug Platform" superClass="cdt.managedbuild.target.gnu.platform.exe.debug"/>
+ <builder buildPath="${workspace_loc:/nws-1wire}" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="cdt.managedbuild.target.gnu.builder.exe.debug.75526737" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" superClass="cdt.managedbuild.target.gnu.builder.exe.debug"/>
+ <tool id="cdt.managedbuild.tool.gnu.archiver.base.532459675" name="GCC Archiver" superClass="cdt.managedbuild.tool.gnu.archiver.base"/>
+ <tool id="cdt.managedbuild.tool.gnu.cpp.compiler.exe.debug.1103546535" name="GCC C++ Compiler" superClass="cdt.managedbuild.tool.gnu.cpp.compiler.exe.debug">
+ <option id="gnu.cpp.compiler.exe.debug.option.optimization.level.2116807624" name="Optimization Level" superClass="gnu.cpp.compiler.exe.debug.option.optimization.level" value="gnu.cpp.compiler.optimization.level.none" valueType="enumerated"/>
+ <option id="gnu.cpp.compiler.exe.debug.option.debugging.level.818770153" name="Debug Level" superClass="gnu.cpp.compiler.exe.debug.option.debugging.level" value="gnu.cpp.compiler.debugging.level.max" valueType="enumerated"/>
+ <inputType id="cdt.managedbuild.tool.gnu.cpp.compiler.input.617172525" superClass="cdt.managedbuild.tool.gnu.cpp.compiler.input"/>
+ </tool>
+ <tool id="cdt.managedbuild.tool.gnu.c.compiler.exe.debug.941137148" name="GCC C Compiler" superClass="cdt.managedbuild.tool.gnu.c.compiler.exe.debug">
+ <option defaultValue="gnu.c.optimization.level.none" id="gnu.c.compiler.exe.debug.option.optimization.level.1635527309" name="Optimization Level" superClass="gnu.c.compiler.exe.debug.option.optimization.level" valueType="enumerated"/>
+ <option id="gnu.c.compiler.exe.debug.option.debugging.level.1174881886" name="Debug Level" superClass="gnu.c.compiler.exe.debug.option.debugging.level" value="gnu.c.debugging.level.max" valueType="enumerated"/>
+ <inputType id="cdt.managedbuild.tool.gnu.c.compiler.input.2085730901" superClass="cdt.managedbuild.tool.gnu.c.compiler.input"/>
+ </tool>
+ <tool id="cdt.managedbuild.tool.gnu.c.linker.exe.debug.2134309318" name="GCC C Linker" superClass="cdt.managedbuild.tool.gnu.c.linker.exe.debug"/>
+ <tool id="cdt.managedbuild.tool.gnu.cpp.linker.exe.debug.1670710263" name="GCC C++ Linker" superClass="cdt.managedbuild.tool.gnu.cpp.linker.exe.debug">
+ <inputType id="cdt.managedbuild.tool.gnu.cpp.linker.input.1905544494" superClass="cdt.managedbuild.tool.gnu.cpp.linker.input">
+ <additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/>
+ <additionalInput kind="additionalinput" paths="$(LIBS)"/>
+ </inputType>
+ </tool>
+ <tool id="cdt.managedbuild.tool.gnu.assembler.exe.debug.61232757" name="GCC Assembler" superClass="cdt.managedbuild.tool.gnu.assembler.exe.debug">
+ <inputType id="cdt.managedbuild.tool.gnu.assembler.input.63739431" superClass="cdt.managedbuild.tool.gnu.assembler.input"/>
+ </tool>
+ </toolChain>
+ </folderInfo>
+ </configuration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+ <storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings"/>
+ <storageModule moduleId="org.eclipse.cdt.core.language.mapping"/>
+ <storageModule moduleId="scannerConfiguration">
+ <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+ <profile id="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile">
+ <buildOutputProvider>
+ <openAction enabled="true" filePath=""/>
+ <parser enabled="true"/>
+ </buildOutputProvider>
+ <scannerInfoProvider id="specsFile">
+ <runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
+ <parser enabled="true"/>
+ </scannerInfoProvider>
+ </profile>
+ <profile id="org.eclipse.cdt.make.core.GCCStandardMakePerFileProfile">
+ <buildOutputProvider>
+ <openAction enabled="true" filePath=""/>
+ <parser enabled="true"/>
+ </buildOutputProvider>
+ <scannerInfoProvider id="makefileGenerator">
+ <runAction arguments="-E -P -v -dD" command="" useDefault="true"/>
+ <parser enabled="true"/>
+ </scannerInfoProvider>
+ </profile>
+ <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfile">
+ <buildOutputProvider>
+ <openAction enabled="true" filePath=""/>
+ <parser enabled="true"/>
+ </buildOutputProvider>
+ <scannerInfoProvider id="specsFile">
+ <runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
+ <parser enabled="true"/>
+ </scannerInfoProvider>
+ </profile>
+ <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileCPP">
+ <buildOutputProvider>
+ <openAction enabled="true" filePath=""/>
+ <parser enabled="true"/>
+ </buildOutputProvider>
+ <scannerInfoProvider id="specsFile">
+ <runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.cpp" command="g++" useDefault="true"/>
+ <parser enabled="true"/>
+ </scannerInfoProvider>
+ </profile>
+ <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC">
+ <buildOutputProvider>
+ <openAction enabled="true" filePath=""/>
+ <parser enabled="true"/>
+ </buildOutputProvider>
+ <scannerInfoProvider id="specsFile">
+ <runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.c" command="gcc" useDefault="true"/>
+ <parser enabled="true"/>
+ </scannerInfoProvider>
+ </profile>
+ <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfile">
+ <buildOutputProvider>
+ <openAction enabled="true" filePath=""/>
+ <parser enabled="true"/>
+ </buildOutputProvider>
+ <scannerInfoProvider id="specsFile">
+ <runAction arguments="-c 'gcc -E -P -v -dD "${plugin_state_location}/${specs_file}"'" command="sh" useDefault="true"/>
+ <parser enabled="true"/>
+ </scannerInfoProvider>
+ </profile>
+ <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileCPP">
+ <buildOutputProvider>
+ <openAction enabled="true" filePath=""/>
+ <parser enabled="true"/>
+ </buildOutputProvider>
+ <scannerInfoProvider id="specsFile">
+ <runAction arguments="-c 'g++ -E -P -v -dD "${plugin_state_location}/specs.cpp"'" command="sh" useDefault="true"/>
+ <parser enabled="true"/>
+ </scannerInfoProvider>
+ </profile>
+ <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileC">
+ <buildOutputProvider>
+ <openAction enabled="true" filePath=""/>
+ <parser enabled="true"/>
+ </buildOutputProvider>
+ <scannerInfoProvider id="specsFile">
+ <runAction arguments="-c 'gcc -E -P -v -dD "${plugin_state_location}/specs.c"'" command="sh" useDefault="true"/>
+ <parser enabled="true"/>
+ </scannerInfoProvider>
+ </profile>
+ <scannerConfigBuildInfo instanceId="cdt.managedbuild.config.gnu.exe.release.1622260442;cdt.managedbuild.config.gnu.exe.release.1622260442.;cdt.managedbuild.tool.gnu.cpp.compiler.exe.release.1185874448;cdt.managedbuild.tool.gnu.cpp.compiler.input.541154833">
+ <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileCPP"/>
+ <profile id="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile">
+ <buildOutputProvider>
+ <openAction enabled="true" filePath=""/>
+ <parser enabled="true"/>
+ </buildOutputProvider>
+ <scannerInfoProvider id="specsFile">
+ <runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
+ <parser enabled="true"/>
+ </scannerInfoProvider>
+ </profile>
+ <profile id="org.eclipse.cdt.make.core.GCCStandardMakePerFileProfile">
+ <buildOutputProvider>
+ <openAction enabled="true" filePath=""/>
+ <parser enabled="true"/>
+ </buildOutputProvider>
+ <scannerInfoProvider id="makefileGenerator">
+ <runAction arguments="-E -P -v -dD" command="" useDefault="true"/>
+ <parser enabled="true"/>
+ </scannerInfoProvider>
+ </profile>
+ <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfile">
+ <buildOutputProvider>
+ <openAction enabled="true" filePath=""/>
+ <parser enabled="true"/>
+ </buildOutputProvider>
+ <scannerInfoProvider id="specsFile">
+ <runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
+ <parser enabled="true"/>
+ </scannerInfoProvider>
+ </profile>
+ <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileCPP">
+ <buildOutputProvider>
+ <openAction enabled="true" filePath=""/>
+ <parser enabled="true"/>
+ </buildOutputProvider>
+ <scannerInfoProvider id="specsFile">
+ <runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.cpp" command="g++" useDefault="true"/>
+ <parser enabled="true"/>
+ </scannerInfoProvider>
+ </profile>
+ <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC">
+ <buildOutputProvider>
+ <openAction enabled="true" filePath=""/>
+ <parser enabled="true"/>
+ </buildOutputProvider>
+ <scannerInfoProvider id="specsFile">
+ <runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.c" command="gcc" useDefault="true"/>
+ <parser enabled="true"/>
+ </scannerInfoProvider>
+ </profile>
+ <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfile">
+ <buildOutputProvider>
+ <openAction enabled="true" filePath=""/>
+ <parser enabled="true"/>
+ </buildOutputProvider>
+ <scannerInfoProvider id="specsFile">
+ <runAction arguments="-c 'gcc -E -P -v -dD "${plugin_state_location}/${specs_file}"'" command="sh" useDefault="true"/>
+ <parser enabled="true"/>
+ </scannerInfoProvider>
+ </profile>
+ <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileCPP">
+ <buildOutputProvider>
+ <openAction enabled="true" filePath=""/>
+ <parser enabled="true"/>
+ </buildOutputProvider>
+ <scannerInfoProvider id="specsFile">
+ <runAction arguments="-c 'g++ -E -P -v -dD "${plugin_state_location}/specs.cpp"'" command="sh" useDefault="true"/>
+ <parser enabled="true"/>
+ </scannerInfoProvider>
+ </profile>
+ <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileC">
+ <buildOutputProvider>
+ <openAction enabled="true" filePath=""/>
+ <parser enabled="true"/>
+ </buildOutputProvider>
+ <scannerInfoProvider id="specsFile">
+ <runAction arguments="-c 'gcc -E -P -v -dD "${plugin_state_location}/specs.c"'" command="sh" useDefault="true"/>
+ <parser enabled="true"/>
+ </scannerInfoProvider>
+ </profile>
+ </scannerConfigBuildInfo>
+ <scannerConfigBuildInfo instanceId="cdt.managedbuild.config.gnu.exe.debug.1197314700;cdt.managedbuild.config.gnu.exe.debug.1197314700.;cdt.managedbuild.tool.gnu.c.compiler.exe.debug.941137148;cdt.managedbuild.tool.gnu.c.compiler.input.2085730901">
+ <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerFileProfile"/>
+ <profile id="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile">
+ <buildOutputProvider>
+ <openAction enabled="true" filePath=""/>
+ <parser enabled="true"/>
+ </buildOutputProvider>
+ <scannerInfoProvider id="specsFile">
+ <runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
+ <parser enabled="true"/>
+ </scannerInfoProvider>
+ </profile>
+ <profile id="org.eclipse.cdt.make.core.GCCStandardMakePerFileProfile">
+ <buildOutputProvider>
+ <openAction enabled="true" filePath=""/>
+ <parser enabled="true"/>
+ </buildOutputProvider>
+ <scannerInfoProvider id="makefileGenerator">
+ <runAction arguments="-E -P -v -dD" command="" useDefault="true"/>
+ <parser enabled="true"/>
+ </scannerInfoProvider>
+ </profile>
+ <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfile">
+ <buildOutputProvider>
+ <openAction enabled="true" filePath=""/>
+ <parser enabled="true"/>
+ </buildOutputProvider>
+ <scannerInfoProvider id="specsFile">
+ <runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
+ <parser enabled="true"/>
+ </scannerInfoProvider>
+ </profile>
+ <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileCPP">
+ <buildOutputProvider>
+ <openAction enabled="true" filePath=""/>
+ <parser enabled="true"/>
+ </buildOutputProvider>
+ <scannerInfoProvider id="specsFile">
+ <runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.cpp" command="g++" useDefault="true"/>
+ <parser enabled="true"/>
+ </scannerInfoProvider>
+ </profile>
+ <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC">
+ <buildOutputProvider>
+ <openAction enabled="true" filePath=""/>
+ <parser enabled="true"/>
+ </buildOutputProvider>
+ <scannerInfoProvider id="specsFile">
+ <runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.c" command="gcc" useDefault="true"/>
+ <parser enabled="true"/>
+ </scannerInfoProvider>
+ </profile>
+ <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfile">
+ <buildOutputProvider>
+ <openAction enabled="true" filePath=""/>
+ <parser enabled="true"/>
+ </buildOutputProvider>
+ <scannerInfoProvider id="specsFile">
+ <runAction arguments="-c 'gcc -E -P -v -dD "${plugin_state_location}/${specs_file}"'" command="sh" useDefault="true"/>
+ <parser enabled="true"/>
+ </scannerInfoProvider>
+ </profile>
+ <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileCPP">
+ <buildOutputProvider>
+ <openAction enabled="true" filePath=""/>
+ <parser enabled="true"/>
+ </buildOutputProvider>
+ <scannerInfoProvider id="specsFile">
+ <runAction arguments="-c 'g++ -E -P -v -dD "${plugin_state_location}/specs.cpp"'" command="sh" useDefault="true"/>
+ <parser enabled="true"/>
+ </scannerInfoProvider>
+ </profile>
+ <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileC">
+ <buildOutputProvider>
+ <openAction enabled="true" filePath=""/>
+ <parser enabled="true"/>
+ </buildOutputProvider>
+ <scannerInfoProvider id="specsFile">
+ <runAction arguments="-c 'gcc -E -P -v -dD "${plugin_state_location}/specs.c"'" command="sh" useDefault="true"/>
+ <parser enabled="true"/>
+ </scannerInfoProvider>
+ </profile>
+ </scannerConfigBuildInfo>
+ <scannerConfigBuildInfo instanceId="cdt.managedbuild.config.gnu.exe.debug.1197314700;cdt.managedbuild.config.gnu.exe.debug.1197314700.;cdt.managedbuild.tool.gnu.cpp.compiler.exe.debug.1103546535;cdt.managedbuild.tool.gnu.cpp.compiler.input.617172525">
+ <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerFileProfile"/>
+ <profile id="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile">
+ <buildOutputProvider>
+ <openAction enabled="true" filePath=""/>
+ <parser enabled="true"/>
+ </buildOutputProvider>
+ <scannerInfoProvider id="specsFile">
+ <runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
+ <parser enabled="true"/>
+ </scannerInfoProvider>
+ </profile>
+ <profile id="org.eclipse.cdt.make.core.GCCStandardMakePerFileProfile">
+ <buildOutputProvider>
+ <openAction enabled="true" filePath=""/>
+ <parser enabled="true"/>
+ </buildOutputProvider>
+ <scannerInfoProvider id="makefileGenerator">
+ <runAction arguments="-E -P -v -dD" command="" useDefault="true"/>
+ <parser enabled="true"/>
+ </scannerInfoProvider>
+ </profile>
+ <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfile">
+ <buildOutputProvider>
+ <openAction enabled="true" filePath=""/>
+ <parser enabled="true"/>
+ </buildOutputProvider>
+ <scannerInfoProvider id="specsFile">
+ <runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
+ <parser enabled="true"/>
+ </scannerInfoProvider>
+ </profile>
+ <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileCPP">
+ <buildOutputProvider>
+ <openAction enabled="true" filePath=""/>
+ <parser enabled="true"/>
+ </buildOutputProvider>
+ <scannerInfoProvider id="specsFile">
+ <runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.cpp" command="g++" useDefault="true"/>
+ <parser enabled="true"/>
+ </scannerInfoProvider>
+ </profile>
+ <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC">
+ <buildOutputProvider>
+ <openAction enabled="true" filePath=""/>
+ <parser enabled="true"/>
+ </buildOutputProvider>
+ <scannerInfoProvider id="specsFile">
+ <runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.c" command="gcc" useDefault="true"/>
+ <parser enabled="true"/>
+ </scannerInfoProvider>
+ </profile>
+ <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfile">
+ <buildOutputProvider>
+ <openAction enabled="true" filePath=""/>
+ <parser enabled="true"/>
+ </buildOutputProvider>
+ <scannerInfoProvider id="specsFile">
+ <runAction arguments="-c 'gcc -E -P -v -dD "${plugin_state_location}/${specs_file}"'" command="sh" useDefault="true"/>
+ <parser enabled="true"/>
+ </scannerInfoProvider>
+ </profile>
+ <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileCPP">
+ <buildOutputProvider>
+ <openAction enabled="true" filePath=""/>
+ <parser enabled="true"/>
+ </buildOutputProvider>
+ <scannerInfoProvider id="specsFile">
+ <runAction arguments="-c 'g++ -E -P -v -dD "${plugin_state_location}/specs.cpp"'" command="sh" useDefault="true"/>
+ <parser enabled="true"/>
+ </scannerInfoProvider>
+ </profile>
+ <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileC">
+ <buildOutputProvider>
+ <openAction enabled="true" filePath=""/>
+ <parser enabled="true"/>
+ </buildOutputProvider>
+ <scannerInfoProvider id="specsFile">
+ <runAction arguments="-c 'gcc -E -P -v -dD "${plugin_state_location}/specs.c"'" command="sh" useDefault="true"/>
+ <parser enabled="true"/>
+ </scannerInfoProvider>
+ </profile>
+ </scannerConfigBuildInfo>
+ <scannerConfigBuildInfo instanceId="cdt.managedbuild.config.gnu.exe.release.1622260442;cdt.managedbuild.config.gnu.exe.release.1622260442.;cdt.managedbuild.tool.gnu.c.compiler.exe.release.524603195;cdt.managedbuild.tool.gnu.c.compiler.input.573451085">
+ <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC"/>
+ <profile id="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile">
+ <buildOutputProvider>
+ <openAction enabled="true" filePath=""/>
+ <parser enabled="true"/>
+ </buildOutputProvider>
+ <scannerInfoProvider id="specsFile">
+ <runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
+ <parser enabled="true"/>
+ </scannerInfoProvider>
+ </profile>
+ <profile id="org.eclipse.cdt.make.core.GCCStandardMakePerFileProfile">
+ <buildOutputProvider>
+ <openAction enabled="true" filePath=""/>
+ <parser enabled="true"/>
+ </buildOutputProvider>
+ <scannerInfoProvider id="makefileGenerator">
+ <runAction arguments="-E -P -v -dD" command="" useDefault="true"/>
+ <parser enabled="true"/>
+ </scannerInfoProvider>
+ </profile>
+ <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfile">
+ <buildOutputProvider>
+ <openAction enabled="true" filePath=""/>
+ <parser enabled="true"/>
+ </buildOutputProvider>
+ <scannerInfoProvider id="specsFile">
+ <runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
+ <parser enabled="true"/>
+ </scannerInfoProvider>
+ </profile>
+ <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileCPP">
+ <buildOutputProvider>
+ <openAction enabled="true" filePath=""/>
+ <parser enabled="true"/>
+ </buildOutputProvider>
+ <scannerInfoProvider id="specsFile">
+ <runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.cpp" command="g++" useDefault="true"/>
+ <parser enabled="true"/>
+ </scannerInfoProvider>
+ </profile>
+ <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC">
+ <buildOutputProvider>
+ <openAction enabled="true" filePath=""/>
+ <parser enabled="true"/>
+ </buildOutputProvider>
+ <scannerInfoProvider id="specsFile">
+ <runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.c" command="gcc" useDefault="true"/>
+ <parser enabled="true"/>
+ </scannerInfoProvider>
+ </profile>
+ <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfile">
+ <buildOutputProvider>
+ <openAction enabled="true" filePath=""/>
+ <parser enabled="true"/>
+ </buildOutputProvider>
+ <scannerInfoProvider id="specsFile">
+ <runAction arguments="-c 'gcc -E -P -v -dD "${plugin_state_location}/${specs_file}"'" command="sh" useDefault="true"/>
+ <parser enabled="true"/>
+ </scannerInfoProvider>
+ </profile>
+ <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileCPP">
+ <buildOutputProvider>
+ <openAction enabled="true" filePath=""/>
+ <parser enabled="true"/>
+ </buildOutputProvider>
+ <scannerInfoProvider id="specsFile">
+ <runAction arguments="-c 'g++ -E -P -v -dD "${plugin_state_location}/specs.cpp"'" command="sh" useDefault="true"/>
+ <parser enabled="true"/>
+ </scannerInfoProvider>
+ </profile>
+ <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileC">
+ <buildOutputProvider>
+ <openAction enabled="true" filePath=""/>
+ <parser enabled="true"/>
+ </buildOutputProvider>
+ <scannerInfoProvider id="specsFile">
+ <runAction arguments="-c 'gcc -E -P -v -dD "${plugin_state_location}/specs.c"'" command="sh" useDefault="true"/>
+ <parser enabled="true"/>
+ </scannerInfoProvider>
+ </profile>
+ </scannerConfigBuildInfo>
+ </storageModule>
+ </cconfiguration>
+ </storageModule>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <project id="nws-1wire.cdt.managedbuild.target.gnu.exe.1068375922" name="Executable" projectType="cdt.managedbuild.target.gnu.exe"/>
+ </storageModule>
+</cproject>
--- /dev/null
+m4
+autom4te.cache
--- /dev/null
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+ <name>nws-1wire</name>
+ <comment></comment>
+ <projects>
+ <project>libplp</project>
+ </projects>
+ <buildSpec>
+ <buildCommand>
+ <name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+ <triggers>clean,full,incremental,</triggers>
+ <arguments>
+ <dictionary>
+ <key>?name?</key>
+ <value></value>
+ </dictionary>
+ <dictionary>
+ <key>org.eclipse.cdt.make.core.append_environment</key>
+ <value>true</value>
+ </dictionary>
+ <dictionary>
+ <key>org.eclipse.cdt.make.core.autoBuildTarget</key>
+ <value>all</value>
+ </dictionary>
+ <dictionary>
+ <key>org.eclipse.cdt.make.core.buildArguments</key>
+ <value></value>
+ </dictionary>
+ <dictionary>
+ <key>org.eclipse.cdt.make.core.buildCommand</key>
+ <value>make</value>
+ </dictionary>
+ <dictionary>
+ <key>org.eclipse.cdt.make.core.buildLocation</key>
+ <value>${workspace_loc:/nws-1wire}</value>
+ </dictionary>
+ <dictionary>
+ <key>org.eclipse.cdt.make.core.cleanBuildTarget</key>
+ <value>clean</value>
+ </dictionary>
+ <dictionary>
+ <key>org.eclipse.cdt.make.core.contents</key>
+ <value>org.eclipse.cdt.make.core.activeConfigSettings</value>
+ </dictionary>
+ <dictionary>
+ <key>org.eclipse.cdt.make.core.enableAutoBuild</key>
+ <value>false</value>
+ </dictionary>
+ <dictionary>
+ <key>org.eclipse.cdt.make.core.enableCleanBuild</key>
+ <value>true</value>
+ </dictionary>
+ <dictionary>
+ <key>org.eclipse.cdt.make.core.enableFullBuild</key>
+ <value>true</value>
+ </dictionary>
+ <dictionary>
+ <key>org.eclipse.cdt.make.core.fullBuildTarget</key>
+ <value>all</value>
+ </dictionary>
+ <dictionary>
+ <key>org.eclipse.cdt.make.core.stopOnError</key>
+ <value>true</value>
+ </dictionary>
+ <dictionary>
+ <key>org.eclipse.cdt.make.core.useDefaultBuildCmd</key>
+ <value>true</value>
+ </dictionary>
+ </arguments>
+ </buildCommand>
+ <buildCommand>
+ <name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+ <triggers>full,incremental,</triggers>
+ <arguments>
+ </arguments>
+ </buildCommand>
+ </buildSpec>
+ <natures>
+ <nature>org.eclipse.cdt.core.cnature</nature>
+ <nature>org.eclipse.cdt.core.ccnature</nature>
+ <nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+ <nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+ </natures>
+</projectDescription>
--- /dev/null
+#Mon Nov 22 23:52:54 EET 2010
+eclipse.preferences.version=1
+org.eclipse.ltk.core.refactoring.enable.project.refactoring.history=false
--- /dev/null
+Mika Laitio <lamikr at pilppa dot org>
--- /dev/null
+ GNU LESSER GENERAL PUBLIC LICENSE
+ Version 3, 29 June 2007
+
+ Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+
+ This version of the GNU Lesser General Public License incorporates
+the terms and conditions of version 3 of the GNU General Public
+License, supplemented by the additional permissions listed below.
+
+ 0. Additional Definitions.
+
+ As used herein, "this License" refers to version 3 of the GNU Lesser
+General Public License, and the "GNU GPL" refers to version 3 of the GNU
+General Public License.
+
+ "The Library" refers to a covered work governed by this License,
+other than an Application or a Combined Work as defined below.
+
+ An "Application" is any work that makes use of an interface provided
+by the Library, but which is not otherwise based on the Library.
+Defining a subclass of a class defined by the Library is deemed a mode
+of using an interface provided by the Library.
+
+ A "Combined Work" is a work produced by combining or linking an
+Application with the Library. The particular version of the Library
+with which the Combined Work was made is also called the "Linked
+Version".
+
+ The "Minimal Corresponding Source" for a Combined Work means the
+Corresponding Source for the Combined Work, excluding any source code
+for portions of the Combined Work that, considered in isolation, are
+based on the Application, and not on the Linked Version.
+
+ The "Corresponding Application Code" for a Combined Work means the
+object code and/or source code for the Application, including any data
+and utility programs needed for reproducing the Combined Work from the
+Application, but excluding the System Libraries of the Combined Work.
+
+ 1. Exception to Section 3 of the GNU GPL.
+
+ You may convey a covered work under sections 3 and 4 of this License
+without being bound by section 3 of the GNU GPL.
+
+ 2. Conveying Modified Versions.
+
+ If you modify a copy of the Library, and, in your modifications, a
+facility refers to a function or data to be supplied by an Application
+that uses the facility (other than as an argument passed when the
+facility is invoked), then you may convey a copy of the modified
+version:
+
+ a) under this License, provided that you make a good faith effort to
+ ensure that, in the event an Application does not supply the
+ function or data, the facility still operates, and performs
+ whatever part of its purpose remains meaningful, or
+
+ b) under the GNU GPL, with none of the additional permissions of
+ this License applicable to that copy.
+
+ 3. Object Code Incorporating Material from Library Header Files.
+
+ The object code form of an Application may incorporate material from
+a header file that is part of the Library. You may convey such object
+code under terms of your choice, provided that, if the incorporated
+material is not limited to numerical parameters, data structure
+layouts and accessors, or small macros, inline functions and templates
+(ten or fewer lines in length), you do both of the following:
+
+ a) Give prominent notice with each copy of the object code that the
+ Library is used in it and that the Library and its use are
+ covered by this License.
+
+ b) Accompany the object code with a copy of the GNU GPL and this license
+ document.
+
+ 4. Combined Works.
+
+ You may convey a Combined Work under terms of your choice that,
+taken together, effectively do not restrict modification of the
+portions of the Library contained in the Combined Work and reverse
+engineering for debugging such modifications, if you also do each of
+the following:
+
+ a) Give prominent notice with each copy of the Combined Work that
+ the Library is used in it and that the Library and its use are
+ covered by this License.
+
+ b) Accompany the Combined Work with a copy of the GNU GPL and this license
+ document.
+
+ c) For a Combined Work that displays copyright notices during
+ execution, include the copyright notice for the Library among
+ these notices, as well as a reference directing the user to the
+ copies of the GNU GPL and this license document.
+
+ d) Do one of the following:
+
+ 0) Convey the Minimal Corresponding Source under the terms of this
+ License, and the Corresponding Application Code in a form
+ suitable for, and under terms that permit, the user to
+ recombine or relink the Application with a modified version of
+ the Linked Version to produce a modified Combined Work, in the
+ manner specified by section 6 of the GNU GPL for conveying
+ Corresponding Source.
+
+ 1) Use a suitable shared library mechanism for linking with the
+ Library. A suitable mechanism is one that (a) uses at run time
+ a copy of the Library already present on the user's computer
+ system, and (b) will operate properly with a modified version
+ of the Library that is interface-compatible with the Linked
+ Version.
+
+ e) Provide Installation Information, but only if you would otherwise
+ be required to provide such information under section 6 of the
+ GNU GPL, and only to the extent that such information is
+ necessary to install and execute a modified version of the
+ Combined Work produced by recombining or relinking the
+ Application with a modified version of the Linked Version. (If
+ you use option 4d0, the Installation Information must accompany
+ the Minimal Corresponding Source and Corresponding Application
+ Code. If you use option 4d1, you must provide the Installation
+ Information in the manner specified by section 6 of the GNU GPL
+ for conveying Corresponding Source.)
+
+ 5. Combined Libraries.
+
+ You may place library facilities that are a work based on the
+Library side by side in a single library together with other library
+facilities that are not Applications and are not covered by this
+License, and convey such a combined library under terms of your
+choice, if you do both of the following:
+
+ a) Accompany the combined library with a copy of the same work based
+ on the Library, uncombined with any other library facilities,
+ conveyed under the terms of this License.
+
+ b) Give prominent notice with the combined library that part of it
+ is a work based on the Library, and explaining where to find the
+ accompanying uncombined form of the same work.
+
+ 6. Revised Versions of the GNU Lesser General Public License.
+
+ The Free Software Foundation may publish revised and/or new versions
+of the GNU Lesser General Public License from time to time. Such new
+versions will be similar in spirit to the present version, but may
+differ in detail to address new problems or concerns.
+
+ Each version is given a distinguishing version number. If the
+Library as you received it specifies that a certain numbered version
+of the GNU Lesser General Public License "or any later version"
+applies to it, you have the option of following the terms and
+conditions either of that published version or of any later version
+published by the Free Software Foundation. If the Library as you
+received it does not specify a version number of the GNU Lesser
+General Public License, you may choose any version of the GNU Lesser
+General Public License ever published by the Free Software Foundation.
+
+ If the Library as you received it specifies that a proxy can decide
+whether future versions of the GNU Lesser General Public License shall
+apply, that proxy's public statement of acceptance of any version is
+permanent authorization for you to choose that version for the
+Library.
--- /dev/null
+Installation Instructions
+*************************
+
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
+2006, 2007, 2008, 2009 Free Software Foundation, Inc.
+
+ Copying and distribution of this file, with or without modification,
+are permitted in any medium without royalty provided the copyright
+notice and this notice are preserved. This file is offered as-is,
+without warranty of any kind.
+
+Basic Installation
+==================
+
+ Briefly, the shell commands `./configure; make; make install' should
+configure, build, and install this package. The following
+more-detailed instructions are generic; see the `README' file for
+instructions specific to this package. Some packages provide this
+`INSTALL' file but do not implement all of the features documented
+below. The lack of an optional feature in a given package is not
+necessarily a bug. More recommendations for GNU packages can be found
+in *note Makefile Conventions: (standards)Makefile Conventions.
+
+ The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation. It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions. Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+debugging `configure').
+
+ It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring. Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.
+
+ If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release. If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
+
+ The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'. You need `configure.ac' if
+you want to change it or regenerate `configure' using a newer version
+of `autoconf'.
+
+ The simplest way to compile this package is:
+
+ 1. `cd' to the directory containing the package's source code and type
+ `./configure' to configure the package for your system.
+
+ Running `configure' might take a while. While running, it prints
+ some messages telling which features it is checking for.
+
+ 2. Type `make' to compile the package.
+
+ 3. Optionally, type `make check' to run any self-tests that come with
+ the package, generally using the just-built uninstalled binaries.
+
+ 4. Type `make install' to install the programs and any data files and
+ documentation. When installing into a prefix owned by root, it is
+ recommended that the package be configured and built as a regular
+ user, and only the `make install' phase executed with root
+ privileges.
+
+ 5. Optionally, type `make installcheck' to repeat any self-tests, but
+ this time using the binaries in their final installed location.
+ This target does not install anything. Running this target as a
+ regular user, particularly if the prior `make install' required
+ root privileges, verifies that the installation completed
+ correctly.
+
+ 6. You can remove the program binaries and object files from the
+ source code directory by typing `make clean'. To also remove the
+ files that `configure' created (so you can compile the package for
+ a different kind of computer), type `make distclean'. There is
+ also a `make maintainer-clean' target, but that is intended mainly
+ for the package's developers. If you use it, you may have to get
+ all sorts of other programs in order to regenerate files that came
+ with the distribution.
+
+ 7. Often, you can also type `make uninstall' to remove the installed
+ files again. In practice, not all packages have tested that
+ uninstallation works correctly, even though it is required by the
+ GNU Coding Standards.
+
+ 8. Some packages, particularly those that use Automake, provide `make
+ distcheck', which can by used by developers to test that all other
+ targets like `make install' and `make uninstall' work correctly.
+ This target is generally not run by end users.
+
+Compilers and Options
+=====================
+
+ Some systems require unusual options for compilation or linking that
+the `configure' script does not know about. Run `./configure --help'
+for details on some of the pertinent environment variables.
+
+ You can give `configure' initial values for configuration parameters
+by setting variables in the command line or in the environment. Here
+is an example:
+
+ ./configure CC=c99 CFLAGS=-g LIBS=-lposix
+
+ *Note Defining Variables::, for more details.
+
+Compiling For Multiple Architectures
+====================================
+
+ You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory. To do this, you can use GNU `make'. `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script. `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'. This
+is known as a "VPATH" build.
+
+ With a non-GNU `make', it is safer to compile the package for one
+architecture at a time in the source code directory. After you have
+installed the package for one architecture, use `make distclean' before
+reconfiguring for another architecture.
+
+ On MacOS X 10.5 and later systems, you can create libraries and
+executables that work on multiple system types--known as "fat" or
+"universal" binaries--by specifying multiple `-arch' options to the
+compiler but only a single `-arch' option to the preprocessor. Like
+this:
+
+ ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+ CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+ CPP="gcc -E" CXXCPP="g++ -E"
+
+ This is not guaranteed to produce working output in all cases, you
+may have to build one architecture at a time and combine the results
+using the `lipo' tool if you have problems.
+
+Installation Names
+==================
+
+ By default, `make install' installs the package's commands under
+`/usr/local/bin', include files under `/usr/local/include', etc. You
+can specify an installation prefix other than `/usr/local' by giving
+`configure' the option `--prefix=PREFIX', where PREFIX must be an
+absolute file name.
+
+ You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files. If you
+pass the option `--exec-prefix=PREFIX' to `configure', the package uses
+PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files still use the regular prefix.
+
+ In addition, if you use an unusual directory layout you can give
+options like `--bindir=DIR' to specify different values for particular
+kinds of files. Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them. In general, the
+default for these options is expressed in terms of `${prefix}', so that
+specifying just `--prefix' will affect all of the other directory
+specifications that were not explicitly provided.
+
+ The most portable way to affect installation locations is to pass the
+correct locations to `configure'; however, many packages provide one or
+both of the following shortcuts of passing variable assignments to the
+`make install' command line to change installation locations without
+having to reconfigure or recompile.
+
+ The first method involves providing an override variable for each
+affected directory. For example, `make install
+prefix=/alternate/directory' will choose an alternate location for all
+directory configuration variables that were expressed in terms of
+`${prefix}'. Any directories that were specified during `configure',
+but not in terms of `${prefix}', must each be overridden at install
+time for the entire installation to be relocated. The approach of
+makefile variable overrides for each directory variable is required by
+the GNU Coding Standards, and ideally causes no recompilation.
+However, some platforms have known limitations with the semantics of
+shared libraries that end up requiring recompilation when using this
+method, particularly noticeable in packages that use GNU Libtool.
+
+ The second method involves providing the `DESTDIR' variable. For
+example, `make install DESTDIR=/alternate/directory' will prepend
+`/alternate/directory' before all installation names. The approach of
+`DESTDIR' overrides is not required by the GNU Coding Standards, and
+does not work on platforms that have drive letters. On the other hand,
+it does better at avoiding recompilation issues, and works well even
+when some directory options were not specified in terms of `${prefix}'
+at `configure' time.
+
+Optional Features
+=================
+
+ If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+ Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System). The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+ For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+ Some packages offer the ability to configure how verbose the
+execution of `make' will be. For these packages, running `./configure
+--enable-silent-rules' sets the default to minimal output, which can be
+overridden with `make V=1'; while running `./configure
+--disable-silent-rules' sets the default to verbose, which can be
+overridden with `make V=0'.
+
+Particular systems
+==================
+
+ On HP-UX, the default C compiler is not ANSI C compatible. If GNU
+CC is not installed, it is recommended to use the following options in
+order to use an ANSI C compiler:
+
+ ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
+
+and if that doesn't work, install pre-built binaries of GCC for HP-UX.
+
+ On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
+parse its `<wchar.h>' header file. The option `-nodtk' can be used as
+a workaround. If GNU CC is not installed, it is therefore recommended
+to try
+
+ ./configure CC="cc"
+
+and if that doesn't work, try
+
+ ./configure CC="cc -nodtk"
+
+ On Solaris, don't put `/usr/ucb' early in your `PATH'. This
+directory contains several dysfunctional programs; working variants of
+these programs are available in `/usr/bin'. So, if you need `/usr/ucb'
+in your `PATH', put it _after_ `/usr/bin'.
+
+ On Haiku, software installed for all users goes in `/boot/common',
+not `/usr/local'. It is recommended to use the following options:
+
+ ./configure --prefix=/boot/common
+
+Specifying the System Type
+==========================
+
+ There may be some features `configure' cannot figure out
+automatically, but needs to determine by the type of machine the package
+will run on. Usually, assuming the package is built to be run on the
+_same_ architectures, `configure' can figure that out, but if it prints
+a message saying it cannot guess the machine type, give it the
+`--build=TYPE' option. TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
+ CPU-COMPANY-SYSTEM
+
+where SYSTEM can have one of these forms:
+
+ OS
+ KERNEL-OS
+
+ See the file `config.sub' for the possible values of each field. If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the machine type.
+
+ If you are _building_ compiler tools for cross-compiling, you should
+use the option `--target=TYPE' to select the type of system they will
+produce code for.
+
+ If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
+
+Sharing Defaults
+================
+
+ If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists. Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Defining Variables
+==================
+
+ Variables not defined in a site shell script can be set in the
+environment passed to `configure'. However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost. In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'. For example:
+
+ ./configure CC=/usr/local2/bin/gcc
+
+causes the specified `gcc' to be used as the C compiler (unless it is
+overridden in the site shell script).
+
+Unfortunately, this technique does not work for `CONFIG_SHELL' due to
+an Autoconf bug. Until the bug is fixed you can use this workaround:
+
+ CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
+
+`configure' Invocation
+======================
+
+ `configure' recognizes the following options to control how it
+operates.
+
+`--help'
+`-h'
+ Print a summary of all of the options to `configure', and exit.
+
+`--help=short'
+`--help=recursive'
+ Print a summary of the options unique to this package's
+ `configure', and exit. The `short' variant lists options used
+ only in the top level, while the `recursive' variant lists options
+ also present in any nested packages.
+
+`--version'
+`-V'
+ Print the version of Autoconf used to generate the `configure'
+ script, and exit.
+
+`--cache-file=FILE'
+ Enable the cache: use and save the results of the tests in FILE,
+ traditionally `config.cache'. FILE defaults to `/dev/null' to
+ disable caching.
+
+`--config-cache'
+`-C'
+ Alias for `--cache-file=config.cache'.
+
+`--quiet'
+`--silent'
+`-q'
+ Do not print messages saying which checks are being made. To
+ suppress all normal output, redirect it to `/dev/null' (any error
+ messages will still be shown).
+
+`--srcdir=DIR'
+ Look for the package's source code in directory DIR. Usually
+ `configure' can determine that directory automatically.
+
+`--prefix=DIR'
+ Use DIR as the installation prefix. *note Installation Names::
+ for more details, including other options available for fine-tuning
+ the installation locations.
+
+`--no-create'
+`-n'
+ Run the configure checks, but stop before creating any output
+ files.
+
+`configure' also accepts some other, not widely useful, options. Run
+`configure --help' for more details.
+
--- /dev/null
+lib1wire is library for communication between processes in one or many different devices
+Copyright (C) 2010 Mika Laitio <lamikr@pilppa.org>
+You can redistribute it and/or modify it under either the terms of the LGPL version 3
+(see COPYING.txt file), or by obtaining the license from the author.
+
--- /dev/null
+SUBDIRS = src_server \
+ src_client
+pkgconfigdir = $(libdir)/pkgconfig
+DISTCLEANFILES = \
+ aclocal.m4 \
+ config.h \
+ config.h.in \
+ config.log \
+ config.status \
+ config.cache \
+ config.guess \
+ config.sub \
+ configure \
+ depcomp \
+ install-sh \
+ libtool \
+ ltmain.sh \
+ Makefile.in \
+ Makefile \
+ missing \
+ stamp-h \
+ stamp-h1 \
+ compile \
+ autom4te.cache \
+ $(pkgconfig_DATA)
\ No newline at end of file
--- /dev/null
+License
+-------
+GNU LESSER GENERAL PUBLIC LICENSE (lgpl) version 3, for details see the COPYING file
+
+Introduction
+------------
+Network service providing a list of 1-wire devices and data from them.
+Network client connecting to service and requesting data from it.
+Based on to plpbus that uses CORBA.
+
+Requirements
+------------
+libplpdevicebus and lib1wire.
+
+Build, install and clean-up
+---------------------------
+- build with command: ./autobuild.sh (generates required autoconf files)
+- install with command: make install
+- remove all generated build files before creating a new commit or patch: make maintainer-clean
+
+howto run test application
+--------------------------
+1) run test client
+ src_test/test_w1
--- /dev/null
+#!/bin/sh
+
+PREFIX=${PREFIX:=/usr/local}
+
+if ! [ -d /lib64 ] ;
+then
+ LIBDIR=${LIBDIR:=$PREFIX/lib}
+else
+ LIBDIR=${LIBDIR:=$PREFIX/lib64}
+fi
+export PKG_CONFIG_PATH=$LIBDIR/pkgconfig:$PKG_CONFIG_PATH
+
+if ! [ -e Makefile ] ;
+then
+ echo "No Makefile available, generating it."
+ libtoolize --automake --force --copy
+ autoreconf --install
+ ./configure --prefix=$PREFIX --libdir=$LIBDIR
+else
+ echo "Makefile found, no need to generate it."
+fi
+make
--- /dev/null
+AC_INIT(src_server/NetworkServiceServer_W1.cc)
+AM_CONFIG_HEADER(config.h)
+AC_CONFIG_MACRO_DIR([m4])
+
+PACKAGE=nws-1wire
+VERSION=0.1.0
+
+CFLAGS="$CFLAGS -ggdb -Wall -Werror"
+LDFLAGS="$LDFLAGS"
+AC_SUBST(CFLAGS)
+AC_SUBST(LDFLAGS)
+CXXFLAGS="$CXXFLAGS -ggdb -Wall -Werror"
+AC_SUBST(CXXFLAGS)
+AC_MSG_NOTICE([nws-1wire Makefile])
+
+AM_INIT_AUTOMAKE($PACKAGE, $VERSION)
+
+AC_PROG_CXX
+AC_STDC_HEADERS
+AC_PROG_LIBTOOL
+AC_PROG_INSTALL
+AM_PROG_CC_C_O
+
+PKG_PROG_PKG_CONFIG()
+
+PKG_CHECK_MODULES(SRC_SERVER, libplpdevicebus_server lib1wire)
+AC_SUBST(SRC_SERVER_CFLAGS)
+AC_SUBST(SRC_SERVER_LIBS)
+
+PKG_CHECK_MODULES(SRC_CLIENT, libplpdevicebus_client lib1wire)
+AC_SUBST(SRC_CLIENT_CFLAGS)
+AC_SUBST(SRC_CLIENT_LIBS)
+
+AC_OUTPUT([
+Makefile
+src_server/Makefile
+src_client/Makefile
+])
--- /dev/null
+noinst_PROGRAMS = nwc_w1
+
+nwc_w1_SOURCES = NetworkServiceClient_W1.cc
+nwc_w1_LDADD = $(SRC_CLIENT_LIBS)
+
+AM_CPPFLAGS = $(SRC_CLIENT_CFLAGS) \
+ -DPACKAGE_DATA_DIR=\"$(datadir)/$(PACKAGE)\"
+
+DISTCLEANFILES = Makefile.in
+
--- /dev/null
+/*
+ * test_client.cc
+ *
+ * Created on: Jun 9, 2010
+ * Author: lamikr
+ */
+
+#include <plp/log.h>
+#include <plp/bus/BusServer.hh>
+#include <plp/bus/BusClient.hh>
+#include <plp/bus/BusMessage.hh>
+
+#include <plp/devicebus/client/ClientListenerImpl.hh>
+#include <plp/devicebus/client/DeviceManagerClient.hh>
+#include <plp/devicebus/client/DeviceManagerController.hh>
+
+using namespace std;
+using namespace plpbus;
+using namespace plp;
+using namespace plpdevicebus;
+
+int main(int argc, char** argv)
+{
+ DeviceManagerController *controller;
+ const list<Device *> *dev_lst;
+ list<Device *>::iterator dev_iter;
+ Device *device;
+ string id;
+
+ controller = new DeviceManagerController();
+ if (controller != NULL) {
+ dev_lst = controller->get_device_list();
+ if (dev_lst != NULL) {
+ for (dev_iter = ((list<Device *> *)dev_lst)->begin(); dev_iter != ((list<Device *> *)dev_lst)->end(); dev_iter++) {
+ device = (Device *)*dev_iter;
+ id = device->get_id();
+ log_debug("device id: %s\n", id.c_str());
+ //dev_man->send_request__get_latest_data(client, id);
+ }
+ }
+ delete(controller);
+ sleep(3);
+ }
+ return 0;
+}
--- /dev/null
+noinst_PROGRAMS = nws_w1
+
+nws_w1_SOURCES = NetworkServiceServer_W1.cc
+nws_w1_LDADD = $(SRC_SERVER_LIBS)
+
+#AM_CPPFLAGS = -I../src_client
+
+DISTCLEANFILES = Makefile.in
\ No newline at end of file
--- /dev/null
+#include <iostream>
+#include <list>
+
+#include <string.h>
+#include <plp/log.h>
+#include <plp/bus/BusServer.hh>
+
+#include <w1/Factory.hh>
+
+#include <plp/devicebus/DeviceBusMessageId.hh>
+#include <plp/devicebus/server/ServerListenerImpl.hh>
+#include <plp/devicebus/server/DeviceManagerServer.hh>
+
+using namespace std;
+using namespace plp;
+using namespace plpbus;
+using namespace plpdevicebus;
+using namespace w1;
+
+int main(int argc, char** argv)
+{
+ BusServer *server;
+ ServerListenerImpl *listener;
+ DeviceManagerServer *dev_man;
+ string save_loc;
+ string server_name;
+ list<Device *> dev_lst;
+
+ server_name = W1_SERVER_NAME;
+ save_loc = DeviceConfig::get_base_dir_name();
+ if (argc >= 2) {
+ save_loc = argv[1];
+ log_info("storage location: %s\n", save_loc.c_str());
+ DeviceConfig::set_base_dir_name(save_loc);
+ }
+ else {
+ log_warning("No storage location parameter given, using default location: %s\n", save_loc.c_str());
+ }
+ log_info("starting server: %s\n", server_name.c_str());
+ dev_lst = Factory::get_device_list();
+ server = new BusServer();
+ dev_man = new DeviceManagerServer(dev_lst);
+ server->init();
+ listener = new ServerListenerImpl(dev_man);
+ server->add_server_listener(listener);
+ server->launch(server_name.c_str());
+ return 0;
+}
projects / nws-w1.git / commitdiff