]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
gpio: add bt8xxgpio driver
authorMichael Buesch <mb@bu3sch.de>
Fri, 25 Jul 2008 08:46:10 +0000 (01:46 -0700)
committerLinus Torvalds <torvalds@linux-foundation.org>
Fri, 25 Jul 2008 17:53:30 +0000 (10:53 -0700)
This adds the bt8xxgpio driver.  The purpose of the bt8xxgpio driver is to
export all of the 24 GPIO pins available on Brooktree 8xx chips to the
kernel GPIO infrastructure.

This makes it possible to use a physically modified BT8xx card as
cheap digital GPIO card.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Cc: David Brownell <david-b@pacbell.net>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Documentation/bt8xxgpio.txt [new file with mode: 0644]
MAINTAINERS
drivers/gpio/Kconfig
drivers/gpio/Makefile
drivers/gpio/bt8xxgpio.c [new file with mode: 0644]

diff --git a/Documentation/bt8xxgpio.txt b/Documentation/bt8xxgpio.txt
new file mode 100644 (file)
index 0000000..d8297e4
--- /dev/null
@@ -0,0 +1,67 @@
+===============================================================
+==  BT8XXGPIO driver                                         ==
+==                                                           ==
+==  A driver for a selfmade cheap BT8xx based PCI GPIO-card  ==
+==                                                           ==
+==  For advanced documentation, see                          ==
+==  http://www.bu3sch.de/btgpio.php                          ==
+===============================================================
+
+
+A generic digital 24-port PCI GPIO card can be built out of an ordinary
+Brooktree bt848, bt849, bt878 or bt879 based analog TV tuner card. The
+Brooktree chip is used in old analog Hauppauge WinTV PCI cards. You can easily
+find them used for low prices on the net.
+
+The bt8xx chip does have 24 digital GPIO ports.
+These ports are accessible via 24 pins on the SMD chip package.
+
+
+==============================================
+==  How to physically access the GPIO pins  ==
+==============================================
+
+The are several ways to access these pins. One might unsolder the whole chip
+and put it on a custom PCI board, or one might only unsolder each individual
+GPIO pin and solder that to some tiny wire. As the chip package really is tiny
+there are some advanced soldering skills needed in any case.
+
+The physical pinouts are drawn in the following ASCII art.
+The GPIO pins are marked with G00-G23
+
+                                           G G G G G G G G G G G G     G G G G G G
+                                           0 0 0 0 0 0 0 0 0 0 1 1     1 1 1 1 1 1
+                                           0 1 2 3 4 5 6 7 8 9 0 1     2 3 4 5 6 7
+           | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
+           ---------------------------------------------------------------------------
+         --|                               ^                                     ^   |--
+         --|                               pin 86                           pin 67   |--
+         --|                                                                         |--
+         --|                                                               pin 61 >  |-- G18
+         --|                                                                         |-- G19
+         --|                                                                         |-- G20
+         --|                                                                         |-- G21
+         --|                                                                         |-- G22
+         --|                                                               pin 56 >  |-- G23
+         --|                                                                         |--
+         --|                           Brooktree 878/879                             |--
+         --|                                                                         |--
+         --|                                                                         |--
+         --|                                                                         |--
+         --|                                                                         |--
+         --|                                                                         |--
+         --|                                                                         |--
+         --|                                                                         |--
+         --|                                                                         |--
+         --|                                                                         |--
+         --|                                                                         |--
+         --|                                                                         |--
+         --|                                                                         |--
+         --|                                                                         |--
+         --|   O                                                                     |--
+         --|                                                                         |--
+           ---------------------------------------------------------------------------
+           | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
+           ^
+           This is pin 1
+
index be05ef9b7b429541fcff3a55f9355160e1e44dcb..4cbf6016a9b98059f4b4691a9240b646a740daf6 100644 (file)
@@ -1043,6 +1043,12 @@ M:       fujita.tomonori@lab.ntt.co.jp
 L:     linux-scsi@vger.kernel.org
 S:     Supported
 
+BT8XXGPIO DRIVER
+P:     Michael Buesch
+M:     mb@bu3sch.de
+W:     http://bu3sch.de/btgpio.php
+S:     Maintained
+
 BTTV VIDEO4LINUX DRIVER
 P:     Mauro Carvalho Chehab
 M:     mchehab@infradead.org
index 6ec0e35b98e32739cd8fad5fa78716d99fdb6727..de202dbe53008c2a7c8a5e24cf67256292148658 100644 (file)
@@ -83,6 +83,24 @@ config GPIO_PCF857X
          This driver provides an in-kernel interface to those GPIOs using
          platform-neutral GPIO calls.
 
+comment "PCI GPIO expanders:"
+
+config GPIO_BT8XX
+       tristate "BT8XX GPIO abuser"
+       depends on PCI && VIDEO_BT848=n
+       help
+         The BT8xx frame grabber chip has 24 GPIO pins than can be abused
+         as a cheap PCI GPIO card.
+
+         This chip can be found on Miro, Hauppauge and STB TV-cards.
+
+         The card needs to be physically altered for using it as a
+         GPIO card. For more information on how to build a GPIO card
+         from a BT8xx TV card, see the documentation file at
+         Documentation/bt8xxgpio.txt
+
+         If unsure, say N.
+
 comment "SPI GPIO expanders:"
 
 config GPIO_MAX7301
index 16e796dc5410fe8659466d54b250b357eee1a6ac..eeb2f2b20282857c146f751044f8671d506f41aa 100644 (file)
@@ -8,3 +8,4 @@ obj-$(CONFIG_GPIO_MAX7301)      += max7301.o
 obj-$(CONFIG_GPIO_MCP23S08)    += mcp23s08.o
 obj-$(CONFIG_GPIO_PCA953X)     += pca953x.o
 obj-$(CONFIG_GPIO_PCF857X)     += pcf857x.o
+obj-$(CONFIG_GPIO_BT8XX)       += bt8xxgpio.o
diff --git a/drivers/gpio/bt8xxgpio.c b/drivers/gpio/bt8xxgpio.c
new file mode 100644 (file)
index 0000000..7a11682
--- /dev/null
@@ -0,0 +1,348 @@
+/*
+
+    bt8xx GPIO abuser
+
+    Copyright (C) 2008 Michael Buesch <mb@bu3sch.de>
+
+    Please do _only_ contact the people listed _above_ with issues related to this driver.
+    All the other people listed below are not related to this driver. Their names
+    are only here, because this driver is derived from the bt848 driver.
+
+
+    Derived from the bt848 driver:
+
+    Copyright (C) 1996,97,98 Ralph  Metzler
+                          & Marcus Metzler
+    (c) 1999-2002 Gerd Knorr
+
+    some v4l2 code lines are taken from Justin's bttv2 driver which is
+    (c) 2000 Justin Schoeman
+
+    V4L1 removal from:
+    (c) 2005-2006 Nickolay V. Shmyrev
+
+    Fixes to be fully V4L2 compliant by
+    (c) 2006 Mauro Carvalho Chehab
+
+    Cropping and overscan support
+    Copyright (C) 2005, 2006 Michael H. Schimek
+    Sponsored by OPQ Systems AB
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+
+#include <asm/gpio.h>
+
+/* Steal the hardware definitions from the bttv driver. */
+#include "../media/video/bt8xx/bt848.h"
+
+
+#define BT8XXGPIO_NR_GPIOS             24 /* We have 24 GPIO pins */
+
+
+struct bt8xxgpio {
+       spinlock_t lock;
+
+       void __iomem *mmio;
+       struct pci_dev *pdev;
+       struct gpio_chip gpio;
+
+#ifdef CONFIG_PM
+       u32 saved_outen;
+       u32 saved_data;
+#endif
+};
+
+#define bgwrite(dat, adr)      writel((dat), bg->mmio+(adr))
+#define bgread(adr)            readl(bg->mmio+(adr))
+
+
+static int modparam_gpiobase = -1/* dynamic */;
+module_param_named(gpiobase, modparam_gpiobase, int, 0444);
+MODULE_PARM_DESC(gpiobase, "The GPIO number base. -1 means dynamic, which is the default.");
+
+
+static int bt8xxgpio_gpio_direction_input(struct gpio_chip *gpio, unsigned nr)
+{
+       struct bt8xxgpio *bg = container_of(gpio, struct bt8xxgpio, gpio);
+       unsigned long flags;
+       u32 outen, data;
+
+       spin_lock_irqsave(&bg->lock, flags);
+
+       data = bgread(BT848_GPIO_DATA);
+       data &= ~(1 << nr);
+       bgwrite(data, BT848_GPIO_DATA);
+
+       outen = bgread(BT848_GPIO_OUT_EN);
+       outen &= ~(1 << nr);
+       bgwrite(outen, BT848_GPIO_OUT_EN);
+
+       spin_unlock_irqrestore(&bg->lock, flags);
+
+       return 0;
+}
+
+static int bt8xxgpio_gpio_get(struct gpio_chip *gpio, unsigned nr)
+{
+       struct bt8xxgpio *bg = container_of(gpio, struct bt8xxgpio, gpio);
+       unsigned long flags;
+       u32 val;
+
+       spin_lock_irqsave(&bg->lock, flags);
+       val = bgread(BT848_GPIO_DATA);
+       spin_unlock_irqrestore(&bg->lock, flags);
+
+       return !!(val & (1 << nr));
+}
+
+static int bt8xxgpio_gpio_direction_output(struct gpio_chip *gpio,
+                                       unsigned nr, int val)
+{
+       struct bt8xxgpio *bg = container_of(gpio, struct bt8xxgpio, gpio);
+       unsigned long flags;
+       u32 outen, data;
+
+       spin_lock_irqsave(&bg->lock, flags);
+
+       outen = bgread(BT848_GPIO_OUT_EN);
+       outen |= (1 << nr);
+       bgwrite(outen, BT848_GPIO_OUT_EN);
+
+       data = bgread(BT848_GPIO_DATA);
+       if (val)
+               data |= (1 << nr);
+       else
+               data &= ~(1 << nr);
+       bgwrite(data, BT848_GPIO_DATA);
+
+       spin_unlock_irqrestore(&bg->lock, flags);
+
+       return 0;
+}
+
+static void bt8xxgpio_gpio_set(struct gpio_chip *gpio,
+                           unsigned nr, int val)
+{
+       struct bt8xxgpio *bg = container_of(gpio, struct bt8xxgpio, gpio);
+       unsigned long flags;
+       u32 data;
+
+       spin_lock_irqsave(&bg->lock, flags);
+
+       data = bgread(BT848_GPIO_DATA);
+       if (val)
+               data |= (1 << nr);
+       else
+               data &= ~(1 << nr);
+       bgwrite(data, BT848_GPIO_DATA);
+
+       spin_unlock_irqrestore(&bg->lock, flags);
+}
+
+static void bt8xxgpio_gpio_setup(struct bt8xxgpio *bg)
+{
+       struct gpio_chip *c = &bg->gpio;
+
+       c->label = bg->pdev->dev.bus_id;
+       c->owner = THIS_MODULE;
+       c->direction_input = bt8xxgpio_gpio_direction_input;
+       c->get = bt8xxgpio_gpio_get;
+       c->direction_output = bt8xxgpio_gpio_direction_output;
+       c->set = bt8xxgpio_gpio_set;
+       c->dbg_show = NULL;
+       c->base = modparam_gpiobase;
+       c->ngpio = BT8XXGPIO_NR_GPIOS;
+       c->can_sleep = 0;
+}
+
+static int bt8xxgpio_probe(struct pci_dev *dev,
+                       const struct pci_device_id *pci_id)
+{
+       struct bt8xxgpio *bg;
+       int err;
+
+       bg = kzalloc(sizeof(*bg), GFP_KERNEL);
+       if (!bg)
+               return -ENOMEM;
+
+       bg->pdev = dev;
+       spin_lock_init(&bg->lock);
+
+       err = pci_enable_device(dev);
+       if (err) {
+               printk(KERN_ERR "bt8xxgpio: Can't enable device.\n");
+               goto err_freebg;
+       }
+       if (!request_mem_region(pci_resource_start(dev, 0),
+                               pci_resource_len(dev, 0),
+                               "bt8xxgpio")) {
+               printk(KERN_WARNING "bt8xxgpio: Can't request iomem (0x%llx).\n",
+                      (unsigned long long)pci_resource_start(dev, 0));
+               err = -EBUSY;
+               goto err_disable;
+       }
+       pci_set_master(dev);
+       pci_set_drvdata(dev, bg);
+
+       bg->mmio = ioremap(pci_resource_start(dev, 0), 0x1000);
+       if (!bg->mmio) {
+               printk(KERN_ERR "bt8xxgpio: ioremap() failed\n");
+               err = -EIO;
+               goto err_release_mem;
+       }
+
+       /* Disable interrupts */
+       bgwrite(0, BT848_INT_MASK);
+
+       /* gpio init */
+       bgwrite(0, BT848_GPIO_DMA_CTL);
+       bgwrite(0, BT848_GPIO_REG_INP);
+       bgwrite(0, BT848_GPIO_OUT_EN);
+
+       bt8xxgpio_gpio_setup(bg);
+       err = gpiochip_add(&bg->gpio);
+       if (err) {
+               printk(KERN_ERR "bt8xxgpio: Failed to register GPIOs\n");
+               goto err_release_mem;
+       }
+
+       printk(KERN_INFO "bt8xxgpio: Abusing BT8xx card for GPIOs %d to %d\n",
+              bg->gpio.base, bg->gpio.base + BT8XXGPIO_NR_GPIOS - 1);
+
+       return 0;
+
+err_release_mem:
+       release_mem_region(pci_resource_start(dev, 0),
+                          pci_resource_len(dev, 0));
+       pci_set_drvdata(dev, NULL);
+err_disable:
+       pci_disable_device(dev);
+err_freebg:
+       kfree(bg);
+
+       return err;
+}
+
+static void bt8xxgpio_remove(struct pci_dev *pdev)
+{
+       struct bt8xxgpio *bg = pci_get_drvdata(pdev);
+
+       gpiochip_remove(&bg->gpio);
+
+       bgwrite(0, BT848_INT_MASK);
+       bgwrite(~0x0, BT848_INT_STAT);
+       bgwrite(0x0, BT848_GPIO_OUT_EN);
+
+       iounmap(bg->mmio);
+       release_mem_region(pci_resource_start(pdev, 0),
+                          pci_resource_len(pdev, 0));
+       pci_disable_device(pdev);
+
+       pci_set_drvdata(pdev, NULL);
+       kfree(bg);
+}
+
+#ifdef CONFIG_PM
+static int bt8xxgpio_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+       struct bt8xxgpio *bg = pci_get_drvdata(pdev);
+       unsigned long flags;
+
+       spin_lock_irqsave(&bg->lock, flags);
+
+       bg->saved_outen = bgread(BT848_GPIO_OUT_EN);
+       bg->saved_data = bgread(BT848_GPIO_DATA);
+
+       bgwrite(0, BT848_INT_MASK);
+       bgwrite(~0x0, BT848_INT_STAT);
+       bgwrite(0x0, BT848_GPIO_OUT_EN);
+
+       spin_unlock_irqrestore(&bg->lock, flags);
+
+       pci_save_state(pdev);
+       pci_disable_device(pdev);
+       pci_set_power_state(pdev, pci_choose_state(pdev, state));
+
+       return 0;
+}
+
+static int bt8xxgpio_resume(struct pci_dev *pdev)
+{
+       struct bt8xxgpio *bg = pci_get_drvdata(pdev);
+       unsigned long flags;
+       int err;
+
+       pci_set_power_state(pdev, 0);
+       err = pci_enable_device(pdev);
+       if (err)
+               return err;
+       pci_restore_state(pdev);
+
+       spin_lock_irqsave(&bg->lock, flags);
+
+       bgwrite(0, BT848_INT_MASK);
+       bgwrite(0, BT848_GPIO_DMA_CTL);
+       bgwrite(0, BT848_GPIO_REG_INP);
+       bgwrite(bg->saved_outen, BT848_GPIO_OUT_EN);
+       bgwrite(bg->saved_data & bg->saved_outen,
+               BT848_GPIO_DATA);
+
+       spin_unlock_irqrestore(&bg->lock, flags);
+
+       return 0;
+}
+#else
+#define bt8xxgpio_suspend NULL
+#define bt8xxgpio_resume NULL
+#endif /* CONFIG_PM */
+
+static struct pci_device_id bt8xxgpio_pci_tbl[] = {
+       { PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT848) },
+       { PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT849) },
+       { PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT878) },
+       { PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT879) },
+       { 0, },
+};
+MODULE_DEVICE_TABLE(pci, bt8xxgpio_pci_tbl);
+
+static struct pci_driver bt8xxgpio_pci_driver = {
+       .name           = "bt8xxgpio",
+       .id_table       = bt8xxgpio_pci_tbl,
+       .probe          = bt8xxgpio_probe,
+       .remove         = bt8xxgpio_remove,
+       .suspend        = bt8xxgpio_suspend,
+       .resume         = bt8xxgpio_resume,
+};
+
+static int bt8xxgpio_init(void)
+{
+       return pci_register_driver(&bt8xxgpio_pci_driver);
+}
+module_init(bt8xxgpio_init)
+
+static void bt8xxgpio_exit(void)
+{
+       pci_unregister_driver(&bt8xxgpio_pci_driver);
+}
+module_exit(bt8xxgpio_exit)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Michael Buesch");
+MODULE_DESCRIPTION("Abuse a BT8xx framegrabber card as generic GPIO card");