[ARM] 2912/1: PXA Corgi: Cleanup some unneeded code

Patch from Richard Purdie

This patch cleans up the PXA Corgi platform code removing an unneeded
static iomap, an unneeded function and some debug messages.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 426c2bc517eb7ca8fd42a06fa2e6b0d971b24324..be37586cb1b062ba5ec96502b223e6e97ab4d215 100644 (file)
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -198,13 +198,10 @@ static void corgi_mci_setpower(struct device *dev, unsigned int vdd)
 {
        struct pxamci_platform_data* p_d = dev->platform_data;
 
-       if (( 1 << vdd) & p_d->ocr_mask) {
-               printk(KERN_DEBUG "%s: on\n", __FUNCTION__);
+       if (( 1 << vdd) & p_d->ocr_mask)
                GPSR1 = GPIO_bit(CORGI_GPIO_SD_PWR);
-       } else {
-               printk(KERN_DEBUG "%s: off\n", __FUNCTION__);
+       else
                GPCR1 = GPIO_bit(CORGI_GPIO_SD_PWR);
-       }
 }
 
 static int corgi_mci_get_ro(struct device *dev)
@@ -259,6 +256,16 @@ static struct platform_device *devices[] __initdata = {
 
 static void __init corgi_init(void)
 {
+       /* setup sleep mode values */
+       PWER  = 0x00000002;
+       PFER  = 0x00000000;
+       PRER  = 0x00000002;
+       PGSR0 = 0x0158C000;
+       PGSR1 = 0x00FF0080;
+       PGSR2 = 0x0001C004;
+       /* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
+       PCFR |= PCFR_OPDE;
+
        corgi_ssp_set_machinfo(&corgi_ssp_machinfo);
 
        pxa_gpio_mode(CORGI_GPIO_USB_PULLUP | GPIO_OUT);
@@ -285,42 +292,14 @@ static void __init fixup_corgi(struct machine_desc *desc,
                mi->bank[0].size = (64*1024*1024);
 }
 
-static void __init corgi_init_irq(void)
-{
-       pxa_init_irq();
-}
-
-static struct map_desc corgi_io_desc[] __initdata = {
-/*    virtual     physical    length      */
-/*     { 0xf1000000, 0x08000000, 0x01000000, MT_DEVICE },*/ /* LCDC (readable for Qt driver) */
-/*     { 0xef700000, 0x10800000, 0x00001000, MT_DEVICE },*/  /* SCOOP */
-       { 0xef800000, 0x00000000, 0x00800000, MT_DEVICE }, /* Boot Flash */
-};
-
-static void __init corgi_map_io(void)
-{
-       pxa_map_io();
-       iotable_init(corgi_io_desc,ARRAY_SIZE(corgi_io_desc));
-
-       /* setup sleep mode values */
-       PWER  = 0x00000002;
-       PFER  = 0x00000000;
-       PRER  = 0x00000002;
-       PGSR0 = 0x0158C000;
-       PGSR1 = 0x00FF0080;
-       PGSR2 = 0x0001C004;
-       /* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
-       PCFR |= PCFR_OPDE;
-}
-
 #ifdef CONFIG_MACH_CORGI
 MACHINE_START(CORGI, "SHARP Corgi")
        .phys_ram       = 0xa0000000,
        .phys_io        = 0x40000000,
        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
        .fixup          = fixup_corgi,
-       .map_io         = corgi_map_io,
-       .init_irq       = corgi_init_irq,
+       .map_io         = pxa_map_io,
+       .init_irq       = pxa_init_irq,
        .init_machine   = corgi_init,
        .timer          = &pxa_timer,
 MACHINE_END
@@ -332,8 +311,8 @@ MACHINE_START(SHEPHERD, "SHARP Shepherd")
        .phys_io        = 0x40000000,
        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
        .fixup          = fixup_corgi,
-       .map_io         = corgi_map_io,
-       .init_irq       = corgi_init_irq,
+       .map_io         = pxa_map_io,
+       .init_irq       = pxa_init_irq,
        .init_machine   = corgi_init,
        .timer          = &pxa_timer,
 MACHINE_END
@@ -345,8 +324,8 @@ MACHINE_START(HUSKY, "SHARP Husky")
        .phys_io        = 0x40000000,
        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
        .fixup          = fixup_corgi,
-       .map_io         = corgi_map_io,
-       .init_irq       = corgi_init_irq,
+       .map_io         = pxa_map_io,
+       .init_irq       = pxa_init_irq,
        .init_machine   = corgi_init,
        .timer          = &pxa_timer,
 MACHINE_END