- Fixed some bttv card numbers.
- BTTV and SAA7134 version numbers incremented to reflect changes.
- pci_dma_supported() is called after pci_set_dma_mask() which
already did check that for us. This patch removes the unneeded call to
pci_dma_supported() at bttv-driver.c
- Ensure a sufficient I2C bus idle time between 2 messages for
saa7134-i2c.c
- It is important to write at first to MO_GP3_IO for cx88-tvaudio.c
- Use try_to_freeze() instead of refrigerator at msp3400.c
- Recognizing the MFPE05-2 Tuner at tveeprom.c
- Add new parameter to help identify radio chipsets at tuner module:
show_i2c=1 will show 16 reading bytes from detected tuners.
- BTTV does generate some Unimplemented IOCTL log at tuner module:
0x40046d11(dir=1,tp=0x6d,nr=17,sz=4) means that it is sending
MSP3400 calls to non-msp3400 tuners. Warning eliminated.
VIDIOSAUDIO is also called, so debug messages updated. It is still
requiring IOCTL implementation.
- Added two more tuners.
- Add support for the SVideo input on the GDI Black Gold.
Signed-off-by: Peter Missel <peter.missel@onlinehome.de>
Signed-off-by: Graham Bevan <graham.bevan@ntlworld.com>
Signed-off-by: Torsten Seeboth <Torsten.Seeboth@t-online.de>
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t.online.de>
Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
tuner=61 - Tena TNF9533-D/IF/TNF9533-B/DF
tuner=62 - Philips TEA5767HN FM Radio
tuner=63 - Philips FMD1216ME MK3 Hybrid Tuner
+tuner=64 - LG TDVS-H062F/TUA6034
+tuner=65 - Ymec TVF66T5-B/DFF
/*
- $Id: bttv-driver.c,v 1.42 2005/07/05 17:37:35 nsh Exp $
+ $Id: bttv-driver.c,v 1.45 2005/07/20 19:43:24 mkrufky Exp $
bttv - Bt848 frame grabber driver
pci_set_master(dev);
pci_set_command(dev);
pci_set_drvdata(dev,btv);
- if (!pci_dma_supported(dev,0xffffffff)) {
- printk("bttv%d: Oops: no 32bit PCI DMA ???\n", btv->c.nr);
- result = -EIO;
- goto fail1;
- }
pci_read_config_byte(dev, PCI_CLASS_REVISION, &btv->revision);
pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
/*
- * $Id: bttv.h,v 1.18 2005/05/24 23:41:42 nsh Exp $
+ * $Id: bttv.h,v 1.22 2005/07/28 18:41:21 mchehab Exp $
*
* bttv - Bt848 frame grabber driver
*
#define BTTV_DVICO_DVBT_LITE 0x80
#define BTTV_TIBET_CS16 0x83
#define BTTV_KODICOM_4400R 0x84
-#define BTTV_ADLINK_RTV24 0x85
+#define BTTV_ADLINK_RTV24 0x86
+#define BTTV_DVICO_FUSIONHDTV_5_LITE 0x87
+#define BTTV_ACORP_Y878F 0x88
/* i2c address list */
#define I2C_TSA5522 0xc2
/*
- $Id: bttvp.h,v 1.19 2005/06/16 21:38:45 nsh Exp $
+ $Id: bttvp.h,v 1.21 2005/07/15 21:44:14 mchehab Exp $
bttv - Bt848 frame grabber driver
#define _BTTVP_H_
#include <linux/version.h>
-#define BTTV_VERSION_CODE KERNEL_VERSION(0,9,15)
+#define BTTV_VERSION_CODE KERNEL_VERSION(0,9,16)
#include <linux/types.h>
#include <linux/wait.h>
/*
- * $Id: cx88-cards.c,v 1.86 2005/07/14 03:06:43 mchehab Exp $
+ * $Id: cx88-cards.c,v 1.90 2005/07/28 02:47:42 mkrufky Exp $
*
* device driver for Conexant 2388x based TV cards
* card-specific stuff.
.input = {{
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
+ },{
+ .type = CX88_VMUX_SVIDEO,
+ .vmux = 2,
}},
},
[CX88_BOARD_PIXELVIEW] = {
/*
- * $Id: cx88-video.c,v 1.80 2005/07/13 08:49:08 mchehab Exp $
+ * $Id: cx88-video.c,v 1.82 2005/07/22 05:13:34 mkrufky Exp $
*
* device driver for Conexant 2388x based TV cards
* video4linux video interface
struct cx88_core *core = dev->core;
int board = core->board;
dprintk(1,"video_open: setting radio device\n");
+ cx_write(MO_GP3_IO, cx88_boards[board].radio.gpio3);
cx_write(MO_GP0_IO, cx88_boards[board].radio.gpio0);
cx_write(MO_GP1_IO, cx88_boards[board].radio.gpio1);
cx_write(MO_GP2_IO, cx88_boards[board].radio.gpio2);
- cx_write(MO_GP3_IO, cx88_boards[board].radio.gpio3);
dev->core->tvaudio = WW_FM;
cx88_set_tvaudio(core);
cx88_set_stereo(core,V4L2_TUNER_MODE_STEREO,1);
schedule_timeout(msecs_to_jiffies(timeout));
}
}
- if (current->flags & PF_FREEZE) {
- refrigerator ();
- }
remove_wait_queue(&msp->wq, &wait);
+ try_to_freeze();
return msp->restart;
}
/*
- * $Id: saa7134-i2c.c,v 1.19 2005/07/07 01:49:30 mkrufky Exp $
+ * $Id: saa7134-i2c.c,v 1.22 2005/07/22 04:09:41 mkrufky Exp $
*
* device driver for philips saa7134 based TV cards
* i2c interface support
status = i2c_get_status(dev);
if (i2c_is_error(status))
goto err;
+ /* ensure that the bus is idle for at least one bit slot */
+ msleep(1);
d1printk("\n");
return num;
/*
- * $Id: saa7134.h,v 1.48 2005/07/01 08:22:24 nsh Exp $
+ * $Id: saa7134.h,v 1.49 2005/07/13 17:25:25 mchehab Exp $
*
* v4l2 device driver for philips saa7134 based TV cards
*
*/
#include <linux/version.h>
-#define SAA7134_VERSION_CODE KERNEL_VERSION(0,2,13)
+#define SAA7134_VERSION_CODE KERNEL_VERSION(0,2,14)
#include <linux/pci.h>
#include <linux/i2c.h>
* For Philips TEA5767 FM Chip used on some TV Cards like Prolink Pixelview
* I2C address is allways 0xC0.
*
- * $Id: tea5767.c,v 1.21 2005/07/14 03:06:43 mchehab Exp $
+ * $Id: tea5767.c,v 1.26 2005/07/27 12:00:36 mkrufky Exp $
*
* Copyright (c) 2005 Mauro Carvalho Chehab (mchehab@brturbo.com.br)
* This code is placed under the terms of the GNU General Public License
#include <linux/videodev.h>
#include <linux/delay.h>
#include <media/tuner.h>
-#include <media/tuner.h>
#define PREFIX "TEA5767 "
int tea5767_autodetection(struct i2c_client *c)
{
- unsigned char buffer[5] = { 0xff, 0xff, 0xff, 0xff, 0xff };
+ unsigned char buffer[7] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
int rc;
struct tuner *t = i2c_get_clientdata(c);
return EINVAL;
}
- /* If all bytes are the same then it's a TV tuner and not a tea5767 chip. */
+ /* If all bytes are the same then it's a TV tuner and not a tea5767 */
if (buffer[0] == buffer[1] && buffer[0] == buffer[2] &&
buffer[0] == buffer[3] && buffer[0] == buffer[4]) {
tuner_warn("All bytes are equal. It is not a TEA5767\n");
tuner_warn("Chip ID is not zero. It is not a TEA5767\n");
return EINVAL;
}
+ /* It seems that tea5767 returns 0xff after the 5th byte */
+ if ((buffer[5] != 0xff) || (buffer[6] != 0xff)) {
+ tuner_warn("Returned more than 5 bytes. It is not a TEA5767\n");
+ return EINVAL;
+ }
tuner_warn("TEA5767 detected.\n");
return 0;
{
struct tuner *t = i2c_get_clientdata(c);
- if (tea5767_autodetection(c) == EINVAL)
- return EINVAL;
-
tuner_info("type set to %d (%s)\n", t->type, "Philips TEA5767HN FM Radio");
strlcpy(c->name, "tea5767", sizeof(c->name));
/*
- * $Id: tuner-core.c,v 1.58 2005/07/14 03:06:43 mchehab Exp $
+ * $Id: tuner-core.c,v 1.63 2005/07/28 18:19:55 mchehab Exp $
*
* i2c tv tuner chip device driver
* core core, i.e. kernel interfaces, registering and so on
#include <media/tuner.h>
#include <media/audiochip.h>
+#include "msp3400.h"
+
#define UNSET (-1U)
/* standard i2c insmod options */
static unsigned int no_autodetect = 0;
module_param(no_autodetect, int, 0444);
+static unsigned int show_i2c = 0;
+module_param(show_i2c, int, 0444);
+
/* insmod options used at runtime => read/write */
unsigned int tuner_debug = 0;
module_param(tuner_debug, int, 0644);
tuner_info("chip found @ 0x%x (%s)\n", addr << 1, adap->name);
+ if (show_i2c) {
+ unsigned char buffer[16];
+ int i,rc;
+
+ memset(buffer, 0, sizeof(buffer));
+ rc = i2c_master_recv(&t->i2c, buffer, sizeof(buffer));
+ printk("tuner-%04x I2C RECV = ",addr);
+ for (i=0;i<rc;i++)
+ printk("%02x ",buffer[i]);
+ printk("\n");
+ }
/* TEA5767 autodetection code - only for addr = 0xc0 */
if (!no_autodetect) {
if (addr == 0x60) {
break;
}
break;
+ case VIDIOCSAUDIO:
+ if (check_mode(t, "VIDIOCSAUDIO") == EINVAL)
+ return 0;
+ if (check_v4l2(t) == EINVAL)
+ return 0;
+
+ /* Should be implemented, since bttv calls it */
+ tuner_dbg("VIDIOCSAUDIO not implemented.\n");
+
+ break;
+ case MSP_SET_MATRIX:
case TDA9887_SET_CONFIG:
break;
/* --- v4l ioctls --- */
/*
- * $Id: tuner-simple.c,v 1.39 2005/07/07 01:49:30 mkrufky Exp $
+ * $Id: tuner-simple.c,v 1.43 2005/07/28 18:41:21 mchehab Exp $
*
* i2c tv tuner chip device driver
* controls all those simple 4-control-bytes style tuners.
/* see tea5767.c for details */},
{ "Philips FMD1216ME MK3 Hybrid Tuner", Philips, PAL,
16*160.00,16*442.00,0x51,0x52,0x54,0x86,623 },
+
+ { "LG TDVS-H062F/TUA6034", LGINNOTEK, NTSC,
+ 16*160.00,16*455.00,0x01,0x02,0x04,0x8e,732},
+
+ { "Ymec TVF66T5-B/DFF", Philips, PAL,
+ 16*160.25,16*464.25,0x01,0x02,0x08,0x8e,623},
};
unsigned const int tuner_count = ARRAY_SIZE(tuners);
{ TUNER_ABSENT, "Philips FQ1236 MK3"},
{ TUNER_ABSENT, "Samsung TCPN 2121P30A"},
{ TUNER_ABSENT, "Samsung TCPE 4121P30A"},
- { TUNER_ABSENT, "TCL MFPE05 2"},
+ { TUNER_PHILIPS_FM1216ME_MK3, "TCL MFPE05 2"},
/* 90-99 */
{ TUNER_ABSENT, "LG TALN H202T"},
{ TUNER_PHILIPS_FQ1216AME_MK4, "Philips FQ1216AME MK4"},
-/* $Id: tuner.h,v 1.42 2005/07/06 09:42:19 mchehab Exp $
+/* $Id: tuner.h,v 1.45 2005/07/28 18:41:21 mchehab Exp $
*
tuner.h - definition for different tuners
#define TUNER_TEA5767 62 /* Only FM Radio Tuner */
#define TUNER_PHILIPS_FMD1216ME_MK3 63
+#define TUNER_LG_TDVS_H062F 64 /* DViCO FusionHDTV 5 */
+#define TUNER_YMEC_TVF66T5_B_DFF 65 /* Acorp Y878F */
#define NOTUNER 0
#define PAL 1 /* PAL_BG */
projects / linux-2.6-omap-h63xx.git / commitdiff