[MIPS] Alchemy: Fix PCI-memory access

The problem was introduced in 2.6.18.3 with the casting of some
36bit-defines (PCI memory) in au1000.h to resource_size_t which may be
u32 or u64 depending on the experimental CONFIG_RESOURCES_64BIT.

With unset CONFIG_RESOURCES_64BIT, the pci-memory cannot be accessed
because the ioremap in arch/mips/au1000/common/pci.c already used the
truncated addresses.
With set CONFIG_RESOURCES_64BIT, things get even worse, because PCI-scan
aborts, due to resource conflict: request_resource() in arch/mips/pci/pci.c
fails because the maximum iomem-address is 0xffffffff (32bit) but the
pci-memory-start-address is 0x440000000 (36bit).

To get pci working again, I propose the following patch:

1. remove the resource_size_t-casting from au1000.h again
2. make the casting in arch/mips/au1000/common/pci.c (it's allowed and
necessary here. The 36bit-handling will be done in __fixup_bigphys_addr).

With this patch pci works again like in 2.6.18.2, the gcc-compile warnings
in pci.c are gone and it doesn't depend on CONFIG_EXPERIMENTAL.

Signed-off-by: Alexander Bigga <ab@mycable.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

diff --git a/include/asm-mips/mach-au1x00/au1000.h b/include/asm-mips/mach-au1x00/au1000.h
index 43beeaa77b107b1d364234d2de10a9356f04f3cc..58fca8a5a9a69361e4813abad7db7e841a2a878b 100644 (file)
--- a/include/asm-mips/mach-au1x00/au1000.h
+++ b/include/asm-mips/mach-au1x00/au1000.h
@@ -1665,12 +1665,12 @@ extern au1xxx_irq_map_t au1xxx_irq_map[];
  * addresses.  For PCI IO, it's simpler because we get to do the ioremap
  * ourselves and then adjust the device's resources.
  */
-#define Au1500_EXT_CFG            ((resource_size_t) 0x600000000ULL)
-#define Au1500_EXT_CFG_TYPE1      ((resource_size_t) 0x680000000ULL)
-#define Au1500_PCI_IO_START       ((resource_size_t) 0x500000000ULL)
-#define Au1500_PCI_IO_END         ((resource_size_t) 0x5000FFFFFULL)
-#define Au1500_PCI_MEM_START      ((resource_size_t) 0x440000000ULL)
-#define Au1500_PCI_MEM_END        ((resource_size_t) 0x44FFFFFFFULL)
+#define Au1500_EXT_CFG            0x600000000ULL
+#define Au1500_EXT_CFG_TYPE1      0x680000000ULL
+#define Au1500_PCI_IO_START       0x500000000ULL
+#define Au1500_PCI_IO_END         0x5000FFFFFULL
+#define Au1500_PCI_MEM_START      0x440000000ULL
+#define Au1500_PCI_MEM_END        0x44FFFFFFFULL
 
 #define PCI_IO_START    (Au1500_PCI_IO_START + 0x1000)
 #define PCI_IO_END      (Au1500_PCI_IO_END)