]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
isd200: use ATA_* defines instead of *_STAT and *_ERR ones
authorBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Wed, 1 Apr 2009 19:42:25 +0000 (21:42 +0200)
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Wed, 1 Apr 2009 19:42:25 +0000 (21:42 +0200)
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
drivers/usb/storage/isd200.c

index 38caed84c993327ad3eb7eed8dda64d0ae5ec6c4..fdba2f69d4c9ed2d390c69638f37e328960aab2b 100644 (file)
@@ -420,19 +420,19 @@ static void isd200_build_sense(struct us_data *us, struct scsi_cmnd *srb)
                buf->Flags = UNIT_ATTENTION;
                buf->AdditionalSenseCode = 0;
                buf->AdditionalSenseCodeQualifier = 0;
-       } else if(error & MCR_ERR) {
+       } else if (error & ATA_MCR) {
                buf->ErrorCode = 0x70 | SENSE_ERRCODE_VALID;
                buf->AdditionalSenseLength = 0xb;
                buf->Flags =  UNIT_ATTENTION;
                buf->AdditionalSenseCode = 0;
                buf->AdditionalSenseCodeQualifier = 0;
-       } else if(error & TRK0_ERR) {
+       } else if (error & ATA_TRK0NF) {
                buf->ErrorCode = 0x70 | SENSE_ERRCODE_VALID;
                buf->AdditionalSenseLength = 0xb;
                buf->Flags =  NOT_READY;
                buf->AdditionalSenseCode = 0;
                buf->AdditionalSenseCodeQualifier = 0;
-       } else if(error & ECC_ERR) {
+       } else if (error & ATA_UNC) {
                buf->ErrorCode = 0x70 | SENSE_ERRCODE_VALID;
                buf->AdditionalSenseLength = 0xb;
                buf->Flags =  DATA_PROTECT;
@@ -945,22 +945,22 @@ static int isd200_try_enum(struct us_data *us, unsigned char master_slave,
                        break;
 
                if (!detect) {
-                       if (regs[ATA_REG_STATUS_OFFSET] & BUSY_STAT) {
+                       if (regs[ATA_REG_STATUS_OFFSET] & ATA_BUSY) {
                                US_DEBUGP("   %s status is still BSY, try again...\n",mstr);
                        } else {
                                US_DEBUGP("   %s status !BSY, continue with next operation\n",mstr);
                                break;
                        }
                }
-               /* check for BUSY_STAT and */
-               /* WRERR_STAT (workaround ATA Zip drive) and */ 
-               /* ERR_STAT (workaround for Archos CD-ROM) */
+               /* check for ATA_BUSY and */
+               /* ATA_DF (workaround ATA Zip drive) and */
+               /* ATA_ERR (workaround for Archos CD-ROM) */
                else if (regs[ATA_REG_STATUS_OFFSET] &
-                        (BUSY_STAT | WRERR_STAT | ERR_STAT )) {
+                        (ATA_BUSY | ATA_DF | ATA_ERR)) {
                        US_DEBUGP("   Status indicates it is not ready, try again...\n");
                }
                /* check for DRDY, ATA devices set DRDY after SRST */
-               else if (regs[ATA_REG_STATUS_OFFSET] & READY_STAT) {
+               else if (regs[ATA_REG_STATUS_OFFSET] & ATA_DRDY) {
                        US_DEBUGP("   Identified ATA device\n");
                        info->DeviceFlags |= DF_ATA_DEVICE;
                        info->DeviceHead = master_slave;