/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
+ * Copyright (C) 1999, 2000, 2006 MIPS Technologies, Inc.
+ * All rights reserved.
+ * Authors: Carsten Langgaard <carstenl@mips.com>
+ * Maciej W. Rozycki <macro@mips.com>
*
* ########################################################################
*
*/
#include <linux/compiler.h>
#include <linux/init.h>
+#include <linux/irq.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/kernel_stat.h>
-#include <asm/irq.h>
+#include <asm/gdb-stub.h>
#include <asm/io.h>
+#include <asm/irq_cpu.h>
+#include <asm/msc01_ic.h>
+
#include <asm/mips-boards/atlas.h>
#include <asm/mips-boards/atlasint.h>
-#include <asm/gdb-stub.h>
-
+#include <asm/mips-boards/generic.h>
static struct atlas_ictrl_regs *atlas_hw0_icregs;
void disable_atlas_irq(unsigned int irq_nr)
{
- atlas_hw0_icregs->intrsten = (1 << (irq_nr-ATLASINT_BASE));
+ atlas_hw0_icregs->intrsten = 1 << (irq_nr - ATLAS_INT_BASE);
iob();
}
void enable_atlas_irq(unsigned int irq_nr)
{
- atlas_hw0_icregs->intseten = (1 << (irq_nr-ATLASINT_BASE));
+ atlas_hw0_icregs->intseten = 1 << (irq_nr - ATLAS_INT_BASE);
iob();
}
if (unlikely(int_status == 0))
return;
- irq = ATLASINT_BASE + ls1bit32(int_status);
+ irq = ATLAS_INT_BASE + ls1bit32(int_status);
DEBUG_INT("atlas_hw0_irqdispatch: irq=%d\n", irq);
}
/*
- * IRQs on the Atlas board look basically (barring software IRQs which we
- * don't use at all and all external interrupt sources are combined together
- * on hardware interrupt 0 (MIPS IRQ 2)) like:
+ * IRQs on the Atlas board look basically like (all external interrupt
+ * sources are combined together on hardware interrupt 0 (MIPS IRQ 2)):
*
- * MIPS IRQ Source
+ * MIPS IRQ Source
* -------- ------
- * 0 Software (ignored)
- * 1 Software (ignored)
- * 2 Combined hardware interrupt (hw0)
+ * 0 Software 0 (reschedule IPI on MT)
+ * 1 Software 1 (remote call IPI on MT)
+ * 2 Combined Atlas hardware interrupt (hw0)
* 3 Hardware (ignored)
* 4 Hardware (ignored)
* 5 Hardware (ignored)
* We handle the IRQ according to _our_ priority which is:
*
* Highest ---- R4k Timer
- * Lowest ---- Combined hardware interrupt
+ * Lowest ---- Software 0
*
* then we just return, if multiple IRQs are pending then we will just take
* another exception, big deal.
if (irq == MIPSCPU_INT_ATLAS)
atlas_hw0_irqdispatch(regs);
- else if (irq > 0)
+ else if (irq >= 0)
do_IRQ(MIPSCPU_INT_BASE + irq, regs);
else
spurious_interrupt(regs);
}
-void __init arch_init_irq(void)
+static inline void init_atlas_irqs (int base)
{
int i;
- atlas_hw0_icregs = (struct atlas_ictrl_regs *)ioremap (ATLAS_ICTRL_REGS_BASE, sizeof(struct atlas_ictrl_regs *));
+ atlas_hw0_icregs = (struct atlas_ictrl_regs *)
+ ioremap(ATLAS_ICTRL_REGS_BASE,
+ sizeof(struct atlas_ictrl_regs *));
/*
* Mask out all interrupt by writing "1" to all bit position in
*/
atlas_hw0_icregs->intrsten = 0xffffffff;
- for (i = ATLASINT_BASE; i <= ATLASINT_END; i++) {
+ for (i = ATLAS_INT_BASE; i <= ATLAS_INT_END; i++) {
irq_desc[i].status = IRQ_DISABLED;
irq_desc[i].action = 0;
irq_desc[i].depth = 1;
spin_lock_init(&irq_desc[i].lock);
}
}
+
+static struct irqaction atlasirq = {
+ .handler = no_action,
+ .name = "Atlas cascade"
+};
+
+msc_irqmap_t __initdata msc_irqmap[] = {
+ {MSC01C_INT_TMR, MSC01_IRQ_EDGE, 0},
+ {MSC01C_INT_PCI, MSC01_IRQ_LEVEL, 0},
+};
+int __initdata msc_nr_irqs = sizeof(msc_irqmap) / sizeof(*msc_irqmap);
+
+msc_irqmap_t __initdata msc_eicirqmap[] = {
+ {MSC01E_INT_SW0, MSC01_IRQ_LEVEL, 0},
+ {MSC01E_INT_SW1, MSC01_IRQ_LEVEL, 0},
+ {MSC01E_INT_ATLAS, MSC01_IRQ_LEVEL, 0},
+ {MSC01E_INT_TMR, MSC01_IRQ_EDGE, 0},
+ {MSC01E_INT_PCI, MSC01_IRQ_LEVEL, 0},
+ {MSC01E_INT_PERFCTR, MSC01_IRQ_LEVEL, 0},
+ {MSC01E_INT_CPUCTR, MSC01_IRQ_LEVEL, 0}
+};
+int __initdata msc_nr_eicirqs = sizeof(msc_eicirqmap) / sizeof(*msc_eicirqmap);
+
+void __init arch_init_irq(void)
+{
+ init_atlas_irqs(ATLAS_INT_BASE);
+
+ if (!cpu_has_veic)
+ mips_cpu_irq_init(MIPSCPU_INT_BASE);
+
+ switch(mips_revision_corid) {
+ case MIPS_REVISION_CORID_CORE_MSC:
+ case MIPS_REVISION_CORID_CORE_FPGA2:
+ case MIPS_REVISION_CORID_CORE_FPGA3:
+ case MIPS_REVISION_CORID_CORE_24K:
+ case MIPS_REVISION_CORID_CORE_EMUL_MSC:
+ if (cpu_has_veic)
+ init_msc_irqs (MSC01E_INT_BASE,
+ msc_eicirqmap, msc_nr_eicirqs);
+ else
+ init_msc_irqs (MSC01C_INT_BASE,
+ msc_irqmap, msc_nr_irqs);
+ }
+
+
+ if (cpu_has_veic) {
+ set_vi_handler (MSC01E_INT_ATLAS, atlas_hw0_irqdispatch);
+ setup_irq (MSC01E_INT_BASE + MSC01E_INT_ATLAS, &atlasirq);
+ } else if (cpu_has_vint) {
+ set_vi_handler (MIPSCPU_INT_ATLAS, atlas_hw0_irqdispatch);
+#ifdef CONFIG_MIPS_MT_SMTC
+ setup_irq_smtc (MIPSCPU_INT_BASE + MIPSCPU_INT_ATLAS,
+ &atlasirq, (0x100 << MIPSCPU_INT_ATLAS));
+#else /* Not SMTC */
+ setup_irq(MIPSCPU_INT_BASE + MIPSCPU_INT_ATLAS, &atlasirq);
+#endif /* CONFIG_MIPS_MT_SMTC */
+ } else
+ setup_irq(MIPSCPU_INT_BASE + MIPSCPU_INT_ATLAS, &atlasirq);
+}
#else
s.iobase = ATLAS_UART_REGS_BASE+3;
#endif
- s.irq = ATLASINT_UART;
+ s.irq = ATLAS_INT_UART;
s.uartclk = ATLAS_BASE_BAUD * 16;
s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ;
s.iotype = UPIO_PORT;
#include <asm/mips-boards/generic.h>
#include <asm/mips-boards/prom.h>
+
+#ifdef CONFIG_MIPS_ATLAS
+#include <asm/mips-boards/atlasint.h>
+#endif
+#ifdef CONFIG_MIPS_MALTA
#include <asm/mips-boards/maltaint.h>
-#include <asm/mc146818-time.h>
+#endif
unsigned long cpu_khz;
#include <asm/mips-boards/atlasint.h>
-#define PCIA ATLASINT_PCIA
-#define PCIB ATLASINT_PCIB
-#define PCIC ATLASINT_PCIC
-#define PCID ATLASINT_PCID
-#define INTA ATLASINT_INTA
-#define INTB ATLASINT_INTB
-#define ETH ATLASINT_ETH
-#define INTC ATLASINT_INTC
-#define SCSI ATLASINT_SCSI
-#define INTD ATLASINT_INTD
+#define PCIA ATLAS_INT_PCIA
+#define PCIB ATLAS_INT_PCIB
+#define PCIC ATLAS_INT_PCIC
+#define PCID ATLAS_INT_PCID
+#define INTA ATLAS_INT_INTA
+#define INTB ATLAS_INT_INTB
+#define ETH ATLAS_INT_ETH
+#define INTC ATLAS_INT_INTC
+#define SCSI ATLAS_INT_SCSI
+#define INTD ATLAS_INT_INTD
static char irq_tab[][5] __initdata = {
/* INTA INTB INTC INTD */
#define RTC_PORT(x) (ATLAS_RTC_ADR_REG + (x) * 8)
#define RTC_IO_EXTENT 0x100
#define RTC_IOMAPPED 0
-#define RTC_IRQ ATLASINT_RTC
+#define RTC_IRQ ATLAS_INT_RTC
static inline unsigned char CMOS_READ(unsigned long addr)
{
/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999 MIPS Technologies, Inc. All rights reserved.
+ * Copyright (C) 1999, 2006 MIPS Technologies, Inc. All rights reserved.
+ * Authors: Carsten Langgaard <carstenl@mips.com>
+ * Maciej W. Rozycki <macro@mips.com>
*
* ########################################################################
*
#ifndef _MIPS_ATLASINT_H
#define _MIPS_ATLASINT_H
-#define ATLASINT_BASE 1
-#define ATLASINT_UART (ATLASINT_BASE+0)
-#define ATLASINT_TIM0 (ATLASINT_BASE+1)
-#define ATLASINT_RES2 (ATLASINT_BASE+2)
-#define ATLASINT_RES3 (ATLASINT_BASE+3)
-#define ATLASINT_RTC (ATLASINT_BASE+4)
-#define ATLASINT_COREHI (ATLASINT_BASE+5)
-#define ATLASINT_CORELO (ATLASINT_BASE+6)
-#define ATLASINT_RES7 (ATLASINT_BASE+7)
-#define ATLASINT_PCIA (ATLASINT_BASE+8)
-#define ATLASINT_PCIB (ATLASINT_BASE+9)
-#define ATLASINT_PCIC (ATLASINT_BASE+10)
-#define ATLASINT_PCID (ATLASINT_BASE+11)
-#define ATLASINT_ENUM (ATLASINT_BASE+12)
-#define ATLASINT_DEG (ATLASINT_BASE+13)
-#define ATLASINT_ATXFAIL (ATLASINT_BASE+14)
-#define ATLASINT_INTA (ATLASINT_BASE+15)
-#define ATLASINT_INTB (ATLASINT_BASE+16)
-#define ATLASINT_ETH ATLASINT_INTB
-#define ATLASINT_INTC (ATLASINT_BASE+17)
-#define ATLASINT_SCSI ATLASINT_INTC
-#define ATLASINT_INTD (ATLASINT_BASE+18)
-#define ATLASINT_SERR (ATLASINT_BASE+19)
-#define ATLASINT_RES20 (ATLASINT_BASE+20)
-#define ATLASINT_RES21 (ATLASINT_BASE+21)
-#define ATLASINT_RES22 (ATLASINT_BASE+22)
-#define ATLASINT_RES23 (ATLASINT_BASE+23)
-#define ATLASINT_RES24 (ATLASINT_BASE+24)
-#define ATLASINT_RES25 (ATLASINT_BASE+25)
-#define ATLASINT_RES26 (ATLASINT_BASE+26)
-#define ATLASINT_RES27 (ATLASINT_BASE+27)
-#define ATLASINT_RES28 (ATLASINT_BASE+28)
-#define ATLASINT_RES29 (ATLASINT_BASE+29)
-#define ATLASINT_RES30 (ATLASINT_BASE+30)
-#define ATLASINT_RES31 (ATLASINT_BASE+31)
-#define ATLASINT_END (ATLASINT_BASE+31)
+/*
+ * Interrupts 0..7 are used for Atlas CPU interrupts (nonEIC mode)
+ */
+#define MIPSCPU_INT_BASE 0
+
+/* CPU interrupt offsets */
+#define MIPSCPU_INT_SW0 0
+#define MIPSCPU_INT_SW1 1
+#define MIPSCPU_INT_MB0 2
+#define MIPSCPU_INT_ATLAS MIPSCPU_INT_MB0
+#define MIPSCPU_INT_MB1 3
+#define MIPSCPU_INT_MB2 4
+#define MIPSCPU_INT_MB3 5
+#define MIPSCPU_INT_MB4 6
+#define MIPSCPU_INT_CPUCTR 7
+
+/*
+ * Interrupts 8..39 are used for Atlas interrupt controller interrupts
+ */
+#define ATLAS_INT_BASE 8
+#define ATLAS_INT_UART (ATLAS_INT_BASE + 0)
+#define ATLAS_INT_TIM0 (ATLAS_INT_BASE + 1)
+#define ATLAS_INT_RES2 (ATLAS_INT_BASE + 2)
+#define ATLAS_INT_RES3 (ATLAS_INT_BASE + 3)
+#define ATLAS_INT_RTC (ATLAS_INT_BASE + 4)
+#define ATLAS_INT_COREHI (ATLAS_INT_BASE + 5)
+#define ATLAS_INT_CORELO (ATLAS_INT_BASE + 6)
+#define ATLAS_INT_RES7 (ATLAS_INT_BASE + 7)
+#define ATLAS_INT_PCIA (ATLAS_INT_BASE + 8)
+#define ATLAS_INT_PCIB (ATLAS_INT_BASE + 9)
+#define ATLAS_INT_PCIC (ATLAS_INT_BASE + 10)
+#define ATLAS_INT_PCID (ATLAS_INT_BASE + 11)
+#define ATLAS_INT_ENUM (ATLAS_INT_BASE + 12)
+#define ATLAS_INT_DEG (ATLAS_INT_BASE + 13)
+#define ATLAS_INT_ATXFAIL (ATLAS_INT_BASE + 14)
+#define ATLAS_INT_INTA (ATLAS_INT_BASE + 15)
+#define ATLAS_INT_INTB (ATLAS_INT_BASE + 16)
+#define ATLAS_INT_ETH ATLAS_INT_INTB
+#define ATLAS_INT_INTC (ATLAS_INT_BASE + 17)
+#define ATLAS_INT_SCSI ATLAS_INT_INTC
+#define ATLAS_INT_INTD (ATLAS_INT_BASE + 18)
+#define ATLAS_INT_SERR (ATLAS_INT_BASE + 19)
+#define ATLAS_INT_RES20 (ATLAS_INT_BASE + 20)
+#define ATLAS_INT_RES21 (ATLAS_INT_BASE + 21)
+#define ATLAS_INT_RES22 (ATLAS_INT_BASE + 22)
+#define ATLAS_INT_RES23 (ATLAS_INT_BASE + 23)
+#define ATLAS_INT_RES24 (ATLAS_INT_BASE + 24)
+#define ATLAS_INT_RES25 (ATLAS_INT_BASE + 25)
+#define ATLAS_INT_RES26 (ATLAS_INT_BASE + 26)
+#define ATLAS_INT_RES27 (ATLAS_INT_BASE + 27)
+#define ATLAS_INT_RES28 (ATLAS_INT_BASE + 28)
+#define ATLAS_INT_RES29 (ATLAS_INT_BASE + 29)
+#define ATLAS_INT_RES30 (ATLAS_INT_BASE + 30)
+#define ATLAS_INT_RES31 (ATLAS_INT_BASE + 31)
+#define ATLAS_INT_END (ATLAS_INT_BASE + 31)
+
+/*
+ * Interrupts 64..127 are used for Soc-it Classic interrupts
+ */
+#define MSC01C_INT_BASE 64
+
+/* SOC-it Classic interrupt offsets */
+#define MSC01C_INT_TMR 0
+#define MSC01C_INT_PCI 1
+
+/*
+ * Interrupts 64..127 are used for Soc-it EIC interrupts
+ */
+#define MSC01E_INT_BASE 64
+
+/* SOC-it EIC interrupt offsets */
+#define MSC01E_INT_SW0 1
+#define MSC01E_INT_SW1 2
+#define MSC01E_INT_MB0 3
+#define MSC01E_INT_ATLAS MSC01E_INT_MB0
+#define MSC01E_INT_MB1 4
+#define MSC01E_INT_MB2 5
+#define MSC01E_INT_MB3 6
+#define MSC01E_INT_MB4 7
+#define MSC01E_INT_TMR 8
+#define MSC01E_INT_PCI 9
+#define MSC01E_INT_PERFCTR 10
+#define MSC01E_INT_CPUCTR 11
#endif /* !(_MIPS_ATLASINT_H) */
projects / linux-2.6-omap-h63xx.git / commitdiff