/* Do we support clones that don't adhere to 14,15 of the SAprom ? */
#define SUPPORT_NE_BAD_CLONES
+/* 0xbad = bad sig or no reset ack */
+#define BAD 0xbad
+
+#define MAX_NE_CARDS 4 /* Max number of NE cards per module */
+static struct platform_device *pdev_ne[MAX_NE_CARDS];
+static int io[MAX_NE_CARDS];
+static int irq[MAX_NE_CARDS];
+static int bad[MAX_NE_CARDS];
+
+#ifdef MODULE
+module_param_array(io, int, NULL, 0);
+module_param_array(irq, int, NULL, 0);
+module_param_array(bad, int, NULL, 0);
+MODULE_PARM_DESC(io, "I/O base address(es),required");
+MODULE_PARM_DESC(irq, "IRQ number(s)");
+MODULE_PARM_DESC(bad, "Accept card(s) with bad signatures");
+MODULE_DESCRIPTION("NE1000/NE2000 ISA/PnP Ethernet driver");
+MODULE_LICENSE("GPL");
+#endif /* MODULE */
/* Do we perform extra sanity checks on stuff ? */
/* #define NE_SANITY_CHECK */
/* Do we have a non std. amount of memory? (in units of 256 byte pages) */
/* #define PACKETBUF_MEMSIZE 0x40 */
+/* This is set up so that no ISA autoprobe takes place. We can't guarantee
+that the ne2k probe is the last 8390 based probe to take place (as it
+is at boot) and so the probe will get confused by any other 8390 cards.
+ISA device autoprobes on a running machine are not recommended anyway. */
#if !defined(MODULE) && (defined(CONFIG_ISA) || defined(CONFIG_M32R))
/* Do we need a portlist for the ISA auto-probe ? */
#define NEEDS_PORTLIST
#endif
/* First check any supplied i/o locations. User knows best. <cough> */
- if (base_addr > 0x1ff) /* Check a single specified location. */
- return ne_probe1(dev, base_addr);
+ if (base_addr > 0x1ff) { /* Check a single specified location. */
+ int ret = ne_probe1(dev, base_addr);
+ if (ret)
+ printk(KERN_WARNING "ne.c: No NE*000 card found at "
+ "i/o = %#lx\n", base_addr);
+ return ret;
+ }
else if (base_addr != 0) /* Don't probe at all. */
return -ENXIO;
return -ENODEV;
}
-#ifndef MODULE
-struct net_device * __init ne_probe(int unit)
-{
- struct net_device *dev = alloc_eip_netdev();
- int err;
-
- if (!dev)
- return ERR_PTR(-ENOMEM);
-
- sprintf(dev->name, "eth%d", unit);
- netdev_boot_setup_check(dev);
-
- err = do_ne_probe(dev);
- if (err)
- goto out;
- return dev;
-out:
- free_netdev(dev);
- return ERR_PTR(err);
-}
-#endif
-
static int __init ne_probe_isapnp(struct net_device *dev)
{
int i;
with an otherwise unused dev->mem_end value of "0xBAD" will
cause the driver to skip these parts of the probe. */
- bad_card = ((dev->base_addr != 0) && (dev->mem_end == 0xbad));
+ bad_card = ((dev->base_addr != 0) && (dev->mem_end == BAD));
/* Reset card. Who knows what dain-bramaged state it was left in. */
static int __init ne_drv_probe(struct platform_device *pdev)
{
struct net_device *dev;
+ int err, this_dev = pdev->id;
struct resource *res;
- int err, irq;
-
- res = platform_get_resource(pdev, IORESOURCE_IO, 0);
- irq = platform_get_irq(pdev, 0);
- if (!res || irq < 0)
- return -ENODEV;
dev = alloc_eip_netdev();
if (!dev)
return -ENOMEM;
- dev->irq = irq;
- dev->base_addr = res->start;
+
+ /* ne.c doesn't populate resources in platform_device, but
+ * rbtx4927_ne_init and rbtx4938_ne_init do register devices
+ * with resources.
+ */
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (res) {
+ dev->base_addr = res->start;
+ dev->irq = platform_get_irq(pdev, 0);
+ } else {
+ if (this_dev < 0 || this_dev >= MAX_NE_CARDS)
+ return -EINVAL;
+ dev->base_addr = io[this_dev];
+ dev->irq = irq[this_dev];
+ dev->mem_end = bad[this_dev];
+ }
err = do_ne_probe(dev);
if (err) {
free_netdev(dev);
return err;
}
platform_set_drvdata(pdev, dev);
+
+ /* Update with any values found by probing, don't update if
+ * resources were specified.
+ */
+ if (!res) {
+ io[this_dev] = dev->base_addr;
+ irq[this_dev] = dev->irq;
+ }
return 0;
}
-static int __exit ne_drv_remove(struct platform_device *pdev)
+static int ne_drv_remove(struct platform_device *pdev)
{
struct net_device *dev = platform_get_drvdata(pdev);
- unregister_netdev(dev);
- free_irq(dev->irq, dev);
- release_region(dev->base_addr, NE_IO_EXTENT);
- free_netdev(dev);
+ if (dev) {
+ struct pnp_dev *idev = (struct pnp_dev *)ei_status.priv;
+ netif_device_detach(dev);
+ unregister_netdev(dev);
+ if (idev)
+ pnp_device_detach(idev);
+ /* Careful ne_drv_remove can be called twice, once from
+ * the platform_driver.remove and again when the
+ * platform_device is being removed.
+ */
+ ei_status.priv = 0;
+ free_irq(dev->irq, dev);
+ release_region(dev->base_addr, NE_IO_EXTENT);
+ free_netdev(dev);
+ platform_set_drvdata(pdev, NULL);
+ }
return 0;
}
+/* Remove unused devices or all if true. */
+static void ne_loop_rm_unreg(int all)
+{
+ int this_dev;
+ struct platform_device *pdev;
+ for (this_dev = 0; this_dev < MAX_NE_CARDS; this_dev++) {
+ pdev = pdev_ne[this_dev];
+ /* No network device == unused */
+ if (pdev && (!platform_get_drvdata(pdev) || all)) {
+ ne_drv_remove(pdev);
+ platform_device_unregister(pdev);
+ pdev_ne[this_dev] = NULL;
+ }
+ }
+}
+
#ifdef CONFIG_PM
static int ne_drv_suspend(struct platform_device *pdev, pm_message_t state)
{
#endif
static struct platform_driver ne_driver = {
- .remove = __exit_p(ne_drv_remove),
+ .remove = ne_drv_remove,
.suspend = ne_drv_suspend,
.resume = ne_drv_resume,
.driver = {
},
};
-static int __init ne_init(void)
+static void __init ne_add_devices(void)
{
- return platform_driver_probe(&ne_driver, ne_drv_probe);
-}
+ int this_dev;
+ struct platform_device *pdev;
-static void __exit ne_exit(void)
-{
- platform_driver_unregister(&ne_driver);
+ for (this_dev = 0; this_dev < MAX_NE_CARDS; this_dev++) {
+ if (pdev_ne[this_dev])
+ continue;
+ pdev = platform_device_register_simple(
+ DRV_NAME, this_dev, NULL, 0);
+ if (IS_ERR(pdev))
+ continue;
+ pdev_ne[this_dev] = pdev;
+ }
}
#ifdef MODULE
-#define MAX_NE_CARDS 4 /* Max number of NE cards per module */
-static struct net_device *dev_ne[MAX_NE_CARDS];
-static int io[MAX_NE_CARDS];
-static int irq[MAX_NE_CARDS];
-static int bad[MAX_NE_CARDS]; /* 0xbad = bad sig or no reset ack */
-
-module_param_array(io, int, NULL, 0);
-module_param_array(irq, int, NULL, 0);
-module_param_array(bad, int, NULL, 0);
-MODULE_PARM_DESC(io, "I/O base address(es),required");
-MODULE_PARM_DESC(irq, "IRQ number(s)");
-MODULE_PARM_DESC(bad, "Accept card(s) with bad signatures");
-MODULE_DESCRIPTION("NE1000/NE2000 ISA/PnP Ethernet driver");
-MODULE_LICENSE("GPL");
-
-/* This is set up so that no ISA autoprobe takes place. We can't guarantee
-that the ne2k probe is the last 8390 based probe to take place (as it
-is at boot) and so the probe will get confused by any other 8390 cards.
-ISA device autoprobes on a running machine are not recommended anyway. */
-
-int __init init_module(void)
+int __init init_module()
{
- int this_dev, found = 0;
- int plat_found = !ne_init();
-
- for (this_dev = 0; this_dev < MAX_NE_CARDS; this_dev++) {
- struct net_device *dev = alloc_eip_netdev();
- if (!dev)
- break;
- dev->irq = irq[this_dev];
- dev->mem_end = bad[this_dev];
- dev->base_addr = io[this_dev];
- if (do_ne_probe(dev) == 0) {
- dev_ne[found++] = dev;
- continue;
- }
- free_netdev(dev);
- if (found || plat_found)
- break;
- if (io[this_dev] != 0)
- printk(KERN_WARNING "ne.c: No NE*000 card found at i/o = %#x\n", io[this_dev]);
- else
- printk(KERN_NOTICE "ne.c: You must supply \"io=0xNNN\" value(s) for ISA cards.\n");
- return -ENXIO;
+ int retval;
+ ne_add_devices();
+ retval = platform_driver_probe(&ne_driver, ne_drv_probe);
+ if (retval) {
+ if (io[0] == 0)
+ printk(KERN_NOTICE "ne.c: You must supply \"io=0xNNN\""
+ " value(s) for ISA cards.\n");
+ ne_loop_rm_unreg(1);
+ return retval;
}
- if (found || plat_found)
- return 0;
- return -ENODEV;
-}
-static void cleanup_card(struct net_device *dev)
+ /* Unregister unused platform_devices. */
+ ne_loop_rm_unreg(0);
+ return retval;
+}
+#else /* MODULE */
+static int __init ne_init(void)
{
- struct pnp_dev *idev = (struct pnp_dev *)ei_status.priv;
- if (idev)
- pnp_device_detach(idev);
- free_irq(dev->irq, dev);
- release_region(dev->base_addr, NE_IO_EXTENT);
+ int retval = platform_driver_probe(&ne_driver, ne_drv_probe);
+
+ /* Unregister unused platform_devices. */
+ ne_loop_rm_unreg(0);
+ return retval;
}
+module_init(ne_init);
-void __exit cleanup_module(void)
+struct net_device * __init ne_probe(int unit)
{
int this_dev;
+ struct net_device *dev;
+
+ /* Find an empty slot, that is no net_device and zero io port. */
+ this_dev = 0;
+ while ((pdev_ne[this_dev] && platform_get_drvdata(pdev_ne[this_dev])) ||
+ io[this_dev]) {
+ if (++this_dev == MAX_NE_CARDS)
+ return ERR_PTR(-ENOMEM);
+ }
+
+ /* Get irq, io from kernel command line */
+ dev = alloc_eip_netdev();
+ if (!dev)
+ return ERR_PTR(-ENOMEM);
- ne_exit();
+ sprintf(dev->name, "eth%d", unit);
+ netdev_boot_setup_check(dev);
+
+ io[this_dev] = dev->base_addr;
+ irq[this_dev] = dev->irq;
+ bad[this_dev] = dev->mem_end;
+
+ free_netdev(dev);
+
+ ne_add_devices();
+
+ /* return the first device found */
for (this_dev = 0; this_dev < MAX_NE_CARDS; this_dev++) {
- struct net_device *dev = dev_ne[this_dev];
- if (dev) {
- unregister_netdev(dev);
- cleanup_card(dev);
- free_netdev(dev);
+ if (pdev_ne[this_dev]) {
+ dev = platform_get_drvdata(pdev_ne[this_dev]);
+ if (dev)
+ return dev;
}
}
+
+ return ERR_PTR(-ENODEV);
}
-#else /* MODULE */
-module_init(ne_init);
-module_exit(ne_exit);
#endif /* MODULE */
+
+static void __exit ne_exit(void)
+{
+ platform_driver_unregister(&ne_driver);
+ ne_loop_rm_unreg(1);
+}
+module_exit(ne_exit);
projects / linux-2.6-omap-h63xx.git / commitdiff