+++ /dev/null
-/*
- * linux/arch/arm/plat-omap/pm.c
- *
- * OMAP Power Management Routines
- *
- * Original code for the SA11x0:
- * Copyright (c) 2001 Cliff Brake <cbrake@accelent.com>
- *
- * Modified for the PXA250 by Nicolas Pitre:
- * Copyright (c) 2002 Monta Vista Software, Inc.
- *
- * Modified for the OMAP1510 by David Singleton:
- * Copyright (c) 2002 Monta Vista Software, Inc.
- *
- * Cleanup 2004 for OMAP1510/1610 by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/pm.h>
-#include <linux/sched.h>
-#include <linux/proc_fs.h>
-#include <linux/pm.h>
-#include <linux/interrupt.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/mach/time.h>
-#include <asm/mach/irq.h>
-
-#include <asm/mach-types.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/tps65010.h>
-#include <asm/arch/dsp_common.h>
-
-#include <asm/arch/clock.h>
-#include <asm/arch/sram.h>
-
-static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
-static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE];
-static unsigned int mpui730_sleep_save[MPUI730_SLEEP_SAVE_SIZE];
-static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE];
-static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE];
-
-static void (*omap_sram_idle)(void) = NULL;
-static void (*omap_sram_suspend)(unsigned long r0, unsigned long r1) = NULL;
-
-/*
- * Let's power down on idle, but only if we are really
- * idle, because once we start down the path of
- * going idle we continue to do idle even if we get
- * a clock tick interrupt . .
- */
-void omap_pm_idle(void)
-{
- unsigned int mask32 = 0;
-
- /*
- * If the DSP is being used let's just idle the CPU, the overhead
- * to wake up from Big Sleep is big, milliseconds versus micro
- * seconds for wait for interrupt.
- */
-
- local_irq_disable();
- local_fiq_disable();
- if (need_resched()) {
- local_fiq_enable();
- local_irq_enable();
- return;
- }
- mask32 = omap_readl(ARM_SYSST);
-
- /*
- * Prevent the ULPD from entering low power state by setting
- * POWER_CTRL_REG:4 = 0
- */
- omap_writew(omap_readw(ULPD_POWER_CTRL) &
- ~ULPD_DEEP_SLEEP_TRANSITION_EN, ULPD_POWER_CTRL);
-
- /*
- * Since an interrupt may set up a timer, we don't want to
- * reprogram the hardware timer with interrupts enabled.
- * Re-enable interrupts only after returning from idle.
- */
- timer_dyn_reprogram();
-
- if ((mask32 & DSP_IDLE) == 0) {
- __asm__ volatile ("mcr p15, 0, r0, c7, c0, 4");
- } else
- omap_sram_idle();
-
- local_fiq_enable();
- local_irq_enable();
-}
-
-/*
- * Configuration of the wakeup event is board specific. For the
- * moment we put it into this helper function. Later it may move
- * to board specific files.
- */
-static void omap_pm_wakeup_setup(void)
-{
- u32 level1_wake = 0;
- u32 level2_wake = OMAP_IRQ_BIT(INT_UART2);
-
- /*
- * Turn off all interrupts except GPIO bank 1, L1-2nd level cascade,
- * and the L2 wakeup interrupts: keypad and UART2. Note that the
- * drivers must still separately call omap_set_gpio_wakeup() to
- * wake up to a GPIO interrupt.
- */
- if (cpu_is_omap730())
- level1_wake = OMAP_IRQ_BIT(INT_730_GPIO_BANK1) |
- OMAP_IRQ_BIT(INT_730_IH2_IRQ);
- else if (cpu_is_omap1510())
- level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) |
- OMAP_IRQ_BIT(INT_1510_IH2_IRQ);
- else if (cpu_is_omap16xx())
- level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) |
- OMAP_IRQ_BIT(INT_1610_IH2_IRQ);
-
- omap_writel(~level1_wake, OMAP_IH1_MIR);
-
- if (cpu_is_omap730()) {
- omap_writel(~level2_wake, OMAP_IH2_0_MIR);
- omap_writel(~(OMAP_IRQ_BIT(INT_730_WAKE_UP_REQ) | OMAP_IRQ_BIT(INT_730_MPUIO_KEYPAD)), OMAP_IH2_1_MIR);
- } else if (cpu_is_omap1510()) {
- level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD);
- omap_writel(~level2_wake, OMAP_IH2_MIR);
- } else if (cpu_is_omap16xx()) {
- level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD);
- omap_writel(~level2_wake, OMAP_IH2_0_MIR);
-
- /* INT_1610_WAKE_UP_REQ is needed for GPIO wakeup... */
- omap_writel(~OMAP_IRQ_BIT(INT_1610_WAKE_UP_REQ), OMAP_IH2_1_MIR);
- omap_writel(~0x0, OMAP_IH2_2_MIR);
- omap_writel(~0x0, OMAP_IH2_3_MIR);
- }
-
- /* New IRQ agreement, recalculate in cascade order */
- omap_writel(1, OMAP_IH2_CONTROL);
- omap_writel(1, OMAP_IH1_CONTROL);
-}
-
-void omap_pm_suspend(void)
-{
- unsigned long arg0 = 0, arg1 = 0;
-
- printk("PM: OMAP%x is trying to enter deep sleep...\n", system_rev);
-
- omap_serial_wake_trigger(1);
-
- if (machine_is_omap_osk()) {
- /* Stop LED1 (D9) blink */
- tps65010_set_led(LED1, OFF);
- }
-
- omap_writew(0xffff, ULPD_SOFT_DISABLE_REQ_REG);
-
- /*
- * Step 1: turn off interrupts (FIXME: NOTE: already disabled)
- */
-
- local_irq_disable();
- local_fiq_disable();
-
- /*
- * Step 2: save registers
- *
- * The omap is a strange/beautiful device. The caches, memory
- * and register state are preserved across power saves.
- * We have to save and restore very little register state to
- * idle the omap.
- *
- * Save interrupt, MPUI, ARM and UPLD control registers.
- */
-
- if (cpu_is_omap730()) {
- MPUI730_SAVE(OMAP_IH1_MIR);
- MPUI730_SAVE(OMAP_IH2_0_MIR);
- MPUI730_SAVE(OMAP_IH2_1_MIR);
- MPUI730_SAVE(MPUI_CTRL);
- MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG);
- MPUI730_SAVE(MPUI_DSP_API_CONFIG);
- MPUI730_SAVE(EMIFS_CONFIG);
- MPUI730_SAVE(EMIFF_SDRAM_CONFIG);
-
- } else if (cpu_is_omap1510()) {
- MPUI1510_SAVE(OMAP_IH1_MIR);
- MPUI1510_SAVE(OMAP_IH2_MIR);
- MPUI1510_SAVE(MPUI_CTRL);
- MPUI1510_SAVE(MPUI_DSP_BOOT_CONFIG);
- MPUI1510_SAVE(MPUI_DSP_API_CONFIG);
- MPUI1510_SAVE(EMIFS_CONFIG);
- MPUI1510_SAVE(EMIFF_SDRAM_CONFIG);
- } else if (cpu_is_omap16xx()) {
- MPUI1610_SAVE(OMAP_IH1_MIR);
- MPUI1610_SAVE(OMAP_IH2_0_MIR);
- MPUI1610_SAVE(OMAP_IH2_1_MIR);
- MPUI1610_SAVE(OMAP_IH2_2_MIR);
- MPUI1610_SAVE(OMAP_IH2_3_MIR);
- MPUI1610_SAVE(MPUI_CTRL);
- MPUI1610_SAVE(MPUI_DSP_BOOT_CONFIG);
- MPUI1610_SAVE(MPUI_DSP_API_CONFIG);
- MPUI1610_SAVE(EMIFS_CONFIG);
- MPUI1610_SAVE(EMIFF_SDRAM_CONFIG);
- }
-
- ARM_SAVE(ARM_CKCTL);
- ARM_SAVE(ARM_IDLECT1);
- ARM_SAVE(ARM_IDLECT2);
- if (!(cpu_is_omap1510()))
- ARM_SAVE(ARM_IDLECT3);
- ARM_SAVE(ARM_EWUPCT);
- ARM_SAVE(ARM_RSTCT1);
- ARM_SAVE(ARM_RSTCT2);
- ARM_SAVE(ARM_SYSST);
- ULPD_SAVE(ULPD_CLOCK_CTRL);
- ULPD_SAVE(ULPD_STATUS_REQ);
-
- /* (Step 3 removed - we now allow deep sleep by default) */
-
- /*
- * Step 4: OMAP DSP Shutdown
- */
-
-
- /*
- * Step 5: Wakeup Event Setup
- */
-
- omap_pm_wakeup_setup();
-
- /*
- * Step 6: ARM and Traffic controller shutdown
- */
-
- /* disable ARM watchdog */
- omap_writel(0x00F5, OMAP_WDT_TIMER_MODE);
- omap_writel(0x00A0, OMAP_WDT_TIMER_MODE);
-
- /*
- * Step 6b: ARM and Traffic controller shutdown
- *
- * Step 6 continues here. Prepare jump to power management
- * assembly code in internal SRAM.
- *
- * Since the omap_cpu_suspend routine has been copied to
- * SRAM, we'll do an indirect procedure call to it and pass the
- * contents of arm_idlect1 and arm_idlect2 so it can restore
- * them when it wakes up and it will return.
- */
-
- arg0 = arm_sleep_save[ARM_SLEEP_SAVE_ARM_IDLECT1];
- arg1 = arm_sleep_save[ARM_SLEEP_SAVE_ARM_IDLECT2];
-
- /*
- * Step 6c: ARM and Traffic controller shutdown
- *
- * Jump to assembly code. The processor will stay there
- * until wake up.
- */
- omap_sram_suspend(arg0, arg1);
-
- /*
- * If we are here, processor is woken up!
- */
-
- /*
- * Restore ARM state, except ARM_IDLECT1/2 which omap_cpu_suspend did
- */
-
- if (!(cpu_is_omap1510()))
- ARM_RESTORE(ARM_IDLECT3);
- ARM_RESTORE(ARM_CKCTL);
- ARM_RESTORE(ARM_EWUPCT);
- ARM_RESTORE(ARM_RSTCT1);
- ARM_RESTORE(ARM_RSTCT2);
- ARM_RESTORE(ARM_SYSST);
- ULPD_RESTORE(ULPD_CLOCK_CTRL);
- ULPD_RESTORE(ULPD_STATUS_REQ);
-
- if (cpu_is_omap730()) {
- MPUI730_RESTORE(EMIFS_CONFIG);
- MPUI730_RESTORE(EMIFF_SDRAM_CONFIG);
- MPUI730_RESTORE(OMAP_IH1_MIR);
- MPUI730_RESTORE(OMAP_IH2_0_MIR);
- MPUI730_RESTORE(OMAP_IH2_1_MIR);
- } else if (cpu_is_omap1510()) {
- MPUI1510_RESTORE(MPUI_CTRL);
- MPUI1510_RESTORE(MPUI_DSP_BOOT_CONFIG);
- MPUI1510_RESTORE(MPUI_DSP_API_CONFIG);
- MPUI1510_RESTORE(EMIFS_CONFIG);
- MPUI1510_RESTORE(EMIFF_SDRAM_CONFIG);
- MPUI1510_RESTORE(OMAP_IH1_MIR);
- MPUI1510_RESTORE(OMAP_IH2_MIR);
- } else if (cpu_is_omap16xx()) {
- MPUI1610_RESTORE(MPUI_CTRL);
- MPUI1610_RESTORE(MPUI_DSP_BOOT_CONFIG);
- MPUI1610_RESTORE(MPUI_DSP_API_CONFIG);
- MPUI1610_RESTORE(EMIFS_CONFIG);
- MPUI1610_RESTORE(EMIFF_SDRAM_CONFIG);
-
- MPUI1610_RESTORE(OMAP_IH1_MIR);
- MPUI1610_RESTORE(OMAP_IH2_0_MIR);
- MPUI1610_RESTORE(OMAP_IH2_1_MIR);
- MPUI1610_RESTORE(OMAP_IH2_2_MIR);
- MPUI1610_RESTORE(OMAP_IH2_3_MIR);
- }
-
- omap_writew(0, ULPD_SOFT_DISABLE_REQ_REG);
-
- /*
- * Reenable interrupts
- */
-
- local_irq_enable();
- local_fiq_enable();
-
- omap_serial_wake_trigger(0);
-
- printk("PM: OMAP%x is re-starting from deep sleep...\n", system_rev);
-
- if (machine_is_omap_osk()) {
- /* Let LED1 (D9) blink again */
- tps65010_set_led(LED1, BLINK);
- }
-}
-
-#if defined(DEBUG) && defined(CONFIG_PROC_FS)
-static int g_read_completed;
-
-/*
- * Read system PM registers for debugging
- */
-static int omap_pm_read_proc(
- char *page_buffer,
- char **my_first_byte,
- off_t virtual_start,
- int length,
- int *eof,
- void *data)
-{
- int my_buffer_offset = 0;
- char * const my_base = page_buffer;
-
- ARM_SAVE(ARM_CKCTL);
- ARM_SAVE(ARM_IDLECT1);
- ARM_SAVE(ARM_IDLECT2);
- if (!(cpu_is_omap1510()))
- ARM_SAVE(ARM_IDLECT3);
- ARM_SAVE(ARM_EWUPCT);
- ARM_SAVE(ARM_RSTCT1);
- ARM_SAVE(ARM_RSTCT2);
- ARM_SAVE(ARM_SYSST);
-
- ULPD_SAVE(ULPD_IT_STATUS);
- ULPD_SAVE(ULPD_CLOCK_CTRL);
- ULPD_SAVE(ULPD_SOFT_REQ);
- ULPD_SAVE(ULPD_STATUS_REQ);
- ULPD_SAVE(ULPD_DPLL_CTRL);
- ULPD_SAVE(ULPD_POWER_CTRL);
-
- if (cpu_is_omap730()) {
- MPUI730_SAVE(MPUI_CTRL);
- MPUI730_SAVE(MPUI_DSP_STATUS);
- MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG);
- MPUI730_SAVE(MPUI_DSP_API_CONFIG);
- MPUI730_SAVE(EMIFF_SDRAM_CONFIG);
- MPUI730_SAVE(EMIFS_CONFIG);
- } else if (cpu_is_omap1510()) {
- MPUI1510_SAVE(MPUI_CTRL);
- MPUI1510_SAVE(MPUI_DSP_STATUS);
- MPUI1510_SAVE(MPUI_DSP_BOOT_CONFIG);
- MPUI1510_SAVE(MPUI_DSP_API_CONFIG);
- MPUI1510_SAVE(EMIFF_SDRAM_CONFIG);
- MPUI1510_SAVE(EMIFS_CONFIG);
- } else if (cpu_is_omap16xx()) {
- MPUI1610_SAVE(MPUI_CTRL);
- MPUI1610_SAVE(MPUI_DSP_STATUS);
- MPUI1610_SAVE(MPUI_DSP_BOOT_CONFIG);
- MPUI1610_SAVE(MPUI_DSP_API_CONFIG);
- MPUI1610_SAVE(EMIFF_SDRAM_CONFIG);
- MPUI1610_SAVE(EMIFS_CONFIG);
- }
-
- if (virtual_start == 0) {
- g_read_completed = 0;
-
- my_buffer_offset += sprintf(my_base + my_buffer_offset,
- "ARM_CKCTL_REG: 0x%-8x \n"
- "ARM_IDLECT1_REG: 0x%-8x \n"
- "ARM_IDLECT2_REG: 0x%-8x \n"
- "ARM_IDLECT3_REG: 0x%-8x \n"
- "ARM_EWUPCT_REG: 0x%-8x \n"
- "ARM_RSTCT1_REG: 0x%-8x \n"
- "ARM_RSTCT2_REG: 0x%-8x \n"
- "ARM_SYSST_REG: 0x%-8x \n"
- "ULPD_IT_STATUS_REG: 0x%-4x \n"
- "ULPD_CLOCK_CTRL_REG: 0x%-4x \n"
- "ULPD_SOFT_REQ_REG: 0x%-4x \n"
- "ULPD_DPLL_CTRL_REG: 0x%-4x \n"
- "ULPD_STATUS_REQ_REG: 0x%-4x \n"
- "ULPD_POWER_CTRL_REG: 0x%-4x \n",
- ARM_SHOW(ARM_CKCTL),
- ARM_SHOW(ARM_IDLECT1),
- ARM_SHOW(ARM_IDLECT2),
- ARM_SHOW(ARM_IDLECT3),
- ARM_SHOW(ARM_EWUPCT),
- ARM_SHOW(ARM_RSTCT1),
- ARM_SHOW(ARM_RSTCT2),
- ARM_SHOW(ARM_SYSST),
- ULPD_SHOW(ULPD_IT_STATUS),
- ULPD_SHOW(ULPD_CLOCK_CTRL),
- ULPD_SHOW(ULPD_SOFT_REQ),
- ULPD_SHOW(ULPD_DPLL_CTRL),
- ULPD_SHOW(ULPD_STATUS_REQ),
- ULPD_SHOW(ULPD_POWER_CTRL));
-
- if (cpu_is_omap730()) {
- my_buffer_offset += sprintf(my_base + my_buffer_offset,
- "MPUI730_CTRL_REG 0x%-8x \n"
- "MPUI730_DSP_STATUS_REG: 0x%-8x \n"
- "MPUI730_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
- "MPUI730_DSP_API_CONFIG_REG: 0x%-8x \n"
- "MPUI730_SDRAM_CONFIG_REG: 0x%-8x \n"
- "MPUI730_EMIFS_CONFIG_REG: 0x%-8x \n",
- MPUI730_SHOW(MPUI_CTRL),
- MPUI730_SHOW(MPUI_DSP_STATUS),
- MPUI730_SHOW(MPUI_DSP_BOOT_CONFIG),
- MPUI730_SHOW(MPUI_DSP_API_CONFIG),
- MPUI730_SHOW(EMIFF_SDRAM_CONFIG),
- MPUI730_SHOW(EMIFS_CONFIG));
- } else if (cpu_is_omap1510()) {
- my_buffer_offset += sprintf(my_base + my_buffer_offset,
- "MPUI1510_CTRL_REG 0x%-8x \n"
- "MPUI1510_DSP_STATUS_REG: 0x%-8x \n"
- "MPUI1510_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
- "MPUI1510_DSP_API_CONFIG_REG: 0x%-8x \n"
- "MPUI1510_SDRAM_CONFIG_REG: 0x%-8x \n"
- "MPUI1510_EMIFS_CONFIG_REG: 0x%-8x \n",
- MPUI1510_SHOW(MPUI_CTRL),
- MPUI1510_SHOW(MPUI_DSP_STATUS),
- MPUI1510_SHOW(MPUI_DSP_BOOT_CONFIG),
- MPUI1510_SHOW(MPUI_DSP_API_CONFIG),
- MPUI1510_SHOW(EMIFF_SDRAM_CONFIG),
- MPUI1510_SHOW(EMIFS_CONFIG));
- } else if (cpu_is_omap16xx()) {
- my_buffer_offset += sprintf(my_base + my_buffer_offset,
- "MPUI1610_CTRL_REG 0x%-8x \n"
- "MPUI1610_DSP_STATUS_REG: 0x%-8x \n"
- "MPUI1610_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
- "MPUI1610_DSP_API_CONFIG_REG: 0x%-8x \n"
- "MPUI1610_SDRAM_CONFIG_REG: 0x%-8x \n"
- "MPUI1610_EMIFS_CONFIG_REG: 0x%-8x \n",
- MPUI1610_SHOW(MPUI_CTRL),
- MPUI1610_SHOW(MPUI_DSP_STATUS),
- MPUI1610_SHOW(MPUI_DSP_BOOT_CONFIG),
- MPUI1610_SHOW(MPUI_DSP_API_CONFIG),
- MPUI1610_SHOW(EMIFF_SDRAM_CONFIG),
- MPUI1610_SHOW(EMIFS_CONFIG));
- }
-
- g_read_completed++;
- } else if (g_read_completed >= 1) {
- *eof = 1;
- return 0;
- }
- g_read_completed++;
-
- *my_first_byte = page_buffer;
- return my_buffer_offset;
-}
-
-static void omap_pm_init_proc(void)
-{
- struct proc_dir_entry *entry;
-
- entry = create_proc_read_entry("driver/omap_pm",
- S_IWUSR | S_IRUGO, NULL,
- omap_pm_read_proc, NULL);
-}
-
-#endif /* DEBUG && CONFIG_PROC_FS */
-
-/*
- * omap_pm_prepare - Do preliminary suspend work.
- * @state: suspend state we're entering.
- *
- */
-//#include <asm/hardware.h>
-
-static int omap_pm_prepare(suspend_state_t state)
-{
- int error = 0;
-
- switch (state)
- {
- case PM_SUSPEND_STANDBY:
- case PM_SUSPEND_MEM:
- break;
-
- case PM_SUSPEND_DISK:
- return -ENOTSUPP;
-
- default:
- return -EINVAL;
- }
-
- return error;
-}
-
-
-/*
- * omap_pm_enter - Actually enter a sleep state.
- * @state: State we're entering.
- *
- */
-
-static int omap_pm_enter(suspend_state_t state)
-{
- switch (state)
- {
- case PM_SUSPEND_STANDBY:
- case PM_SUSPEND_MEM:
- omap_pm_suspend();
- break;
-
- case PM_SUSPEND_DISK:
- return -ENOTSUPP;
-
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-
-/**
- * omap_pm_finish - Finish up suspend sequence.
- * @state: State we're coming out of.
- *
- * This is called after we wake back up (or if entering the sleep state
- * failed).
- */
-
-static int omap_pm_finish(suspend_state_t state)
-{
- return 0;
-}
-
-
-static irqreturn_t omap_wakeup_interrupt(int irq, void * dev,
- struct pt_regs * regs)
-{
- return IRQ_HANDLED;
-}
-
-static struct irqaction omap_wakeup_irq = {
- .name = "peripheral wakeup",
- .flags = IRQF_DISABLED,
- .handler = omap_wakeup_interrupt
-};
-
-
-
-static struct pm_ops omap_pm_ops ={
- .pm_disk_mode = 0,
- .prepare = omap_pm_prepare,
- .enter = omap_pm_enter,
- .finish = omap_pm_finish,
-};
-
-static int __init omap_pm_init(void)
-{
- printk("Power Management for TI OMAP.\n");
- /*
- * We copy the assembler sleep/wakeup routines to SRAM.
- * These routines need to be in SRAM as that's the only
- * memory the MPU can see when it wakes up.
- */
- if (cpu_is_omap730()) {
- omap_sram_idle = omap_sram_push(omap730_idle_loop_suspend,
- omap730_idle_loop_suspend_sz);
- omap_sram_suspend = omap_sram_push(omap730_cpu_suspend,
- omap730_cpu_suspend_sz);
- } else if (cpu_is_omap1510()) {
- omap_sram_idle = omap_sram_push(omap1510_idle_loop_suspend,
- omap1510_idle_loop_suspend_sz);
- omap_sram_suspend = omap_sram_push(omap1510_cpu_suspend,
- omap1510_cpu_suspend_sz);
- } else if (cpu_is_omap16xx()) {
- omap_sram_idle = omap_sram_push(omap1610_idle_loop_suspend,
- omap1610_idle_loop_suspend_sz);
- omap_sram_suspend = omap_sram_push(omap1610_cpu_suspend,
- omap1610_cpu_suspend_sz);
- }
-
- if (omap_sram_idle == NULL || omap_sram_suspend == NULL) {
- printk(KERN_ERR "PM not initialized: Missing SRAM support\n");
- return -ENODEV;
- }
-
- pm_idle = omap_pm_idle;
-
- if (cpu_is_omap730())
- setup_irq(INT_730_WAKE_UP_REQ, &omap_wakeup_irq);
- else if (cpu_is_omap16xx())
- setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq);
-
-#if 0
- /* --- BEGIN BOARD-DEPENDENT CODE --- */
- /* Sleepx mask direction */
- omap_writew((omap_readw(0xfffb5008) & ~2), 0xfffb5008);
- /* Unmask sleepx signal */
- omap_writew((omap_readw(0xfffb5004) & ~2), 0xfffb5004);
- /* --- END BOARD-DEPENDENT CODE --- */
-#endif
-
- /* Program new power ramp-up time
- * (0 for most boards since we don't lower voltage when in deep sleep)
- */
- omap_writew(ULPD_SETUP_ANALOG_CELL_3_VAL, ULPD_SETUP_ANALOG_CELL_3);
-
- /* Setup ULPD POWER_CTRL_REG - enter deep sleep whenever possible */
- omap_writew(ULPD_POWER_CTRL_REG_VAL, ULPD_POWER_CTRL);
-
- /* Configure IDLECT3 */
- if (cpu_is_omap730())
- omap_writel(OMAP730_IDLECT3_VAL, OMAP730_IDLECT3);
- else if (cpu_is_omap16xx())
- omap_writel(OMAP1610_IDLECT3_VAL, OMAP1610_IDLECT3);
-
- pm_set_ops(&omap_pm_ops);
-
-#if defined(DEBUG) && defined(CONFIG_PROC_FS)
- omap_pm_init_proc();
-#endif
-
- if (cpu_is_omap16xx()) {
- /* configure LOW_PWR pin */
- omap_cfg_reg(T20_1610_LOW_PWR);
- }
-
- return 0;
-}
-__initcall(omap_pm_init);
-
projects / linux-2.6-omap-h63xx.git / commitdiff