]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
[PATCH] e100: e100_eeprom_load was called after e100_phy_init
authorMalli Chilakala <mallikarjuna.chilakala@intel.com>
Sat, 18 Jun 2005 00:30:22 +0000 (17:30 -0700)
committerJeff Garzik <jgarzik@pobox.com>
Mon, 27 Jun 2005 04:30:23 +0000 (00:30 -0400)
e100_eeprom_load was called after e100_phy_init causing phy_init
not to use values set in EEPROM - from emann@mrv.com

Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com>
Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
drivers/net/e100.c

index 7e46d038b9f880469d18c0da7f7976ffc1c18137..8c7e2d17e75f1e048d564fe5f272744a9081effc 100644 (file)
@@ -2340,11 +2340,11 @@ static int __devinit e100_probe(struct pci_dev *pdev,
                goto err_out_iounmap;
        }
 
-       e100_phy_init(nic);
-
        if((err = e100_eeprom_load(nic)))
                goto err_out_free;
 
+       e100_phy_init(nic);
+
        memcpy(netdev->dev_addr, nic->eeprom, ETH_ALEN);
        if(!is_valid_ether_addr(netdev->dev_addr)) {
                DPRINTK(PROBE, ERR, "Invalid MAC address from "