return dev->priv;
}
-/* function declaration ------------------------------------- */
-static int dm9000_open(struct net_device *);
-static int dm9000_start_xmit(struct sk_buff *, struct net_device *);
-static int dm9000_stop(struct net_device *);
-
-static void dm9000_init_dm9000(struct net_device *);
-
-static irqreturn_t dm9000_interrupt(int, void *);
-
-static int dm9000_phy_read(struct net_device *dev, int phy, int reg);
-static void dm9000_phy_write(struct net_device *dev, int phy, int reg, int v);
-
-static void dm9000_read_eeprom(board_info_t *, int addr, u8 *to);
-static void dm9000_write_eeprom(board_info_t *, int addr, u8 *dp);
-static void dm9000_rx(struct net_device *);
-static void dm9000_hash_table(struct net_device *);
-
/* DM9000 network board routine ---------------------------- */
static void
schedule_delayed_work(&db->phy_poll, HZ * 2);
}
-/* Our watchdog timed out. Called by the networking layer */
-static void dm9000_timeout(struct net_device *dev)
+static int dm9000_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
+{
+ board_info_t *dm = to_dm9000_board(dev);
+
+ if (!netif_running(dev))
+ return -EINVAL;
+
+ return generic_mii_ioctl(&dm->mii, if_mii(req), cmd, NULL);
+}
+
+static unsigned int
+dm9000_read_locked(board_info_t *db, int reg)
{
- board_info_t *db = (board_info_t *) dev->priv;
- u8 reg_save;
unsigned long flags;
+ unsigned int ret;
- /* Save previous register address */
- reg_save = readb(db->io_addr);
- spin_lock_irqsave(&db->lock,flags);
+ spin_lock_irqsave(&db->lock, flags);
+ ret = ior(db, reg);
+ spin_unlock_irqrestore(&db->lock, flags);
- netif_stop_queue(dev);
- dm9000_reset(db);
- dm9000_init_dm9000(dev);
- /* We can accept TX packets again */
- dev->trans_start = jiffies;
- netif_wake_queue(dev);
+ return ret;
+}
- /* Restore previous register address */
- writeb(reg_save, db->io_addr);
- spin_unlock_irqrestore(&db->lock,flags);
+static int dm9000_wait_eeprom(board_info_t *db)
+{
+ unsigned int status;
+ int timeout = 8; /* wait max 8msec */
+
+ /* The DM9000 data sheets say we should be able to
+ * poll the ERRE bit in EPCR to wait for the EEPROM
+ * operation. From testing several chips, this bit
+ * does not seem to work.
+ *
+ * We attempt to use the bit, but fall back to the
+ * timeout (which is why we do not return an error
+ * on expiry) to say that the EEPROM operation has
+ * completed.
+ */
+
+ while (1) {
+ status = dm9000_read_locked(db, DM9000_EPCR);
+
+ if ((status & EPCR_ERRE) == 0)
+ break;
+
+ if (timeout-- < 0) {
+ dev_dbg(db->dev, "timeout waiting EEPROM\n");
+ break;
+ }
+ }
+
+ return 0;
}
-#ifdef CONFIG_NET_POLL_CONTROLLER
/*
- *Used by netconsole
+ * Read a word data from EEPROM
*/
-static void dm9000_poll_controller(struct net_device *dev)
+static void
+dm9000_read_eeprom(board_info_t *db, int offset, u8 *to)
{
- disable_irq(dev->irq);
- dm9000_interrupt(dev->irq,dev);
- enable_irq(dev->irq);
+ unsigned long flags;
+
+ if (db->flags & DM9000_PLATF_NO_EEPROM) {
+ to[0] = 0xff;
+ to[1] = 0xff;
+ return;
+ }
+
+ mutex_lock(&db->addr_lock);
+
+ spin_lock_irqsave(&db->lock, flags);
+
+ iow(db, DM9000_EPAR, offset);
+ iow(db, DM9000_EPCR, EPCR_ERPRR);
+
+ spin_unlock_irqrestore(&db->lock, flags);
+
+ dm9000_wait_eeprom(db);
+
+ /* delay for at-least 150uS */
+ msleep(1);
+
+ spin_lock_irqsave(&db->lock, flags);
+
+ iow(db, DM9000_EPCR, 0x0);
+
+ to[0] = ior(db, DM9000_EPDRL);
+ to[1] = ior(db, DM9000_EPDRH);
+
+ spin_unlock_irqrestore(&db->lock, flags);
+
+ mutex_unlock(&db->addr_lock);
}
-#endif
-static int dm9000_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
+/*
+ * Write a word data to SROM
+ */
+static void
+dm9000_write_eeprom(board_info_t *db, int offset, u8 *data)
{
- board_info_t *dm = to_dm9000_board(dev);
+ unsigned long flags;
- if (!netif_running(dev))
- return -EINVAL;
+ if (db->flags & DM9000_PLATF_NO_EEPROM)
+ return;
- return generic_mii_ioctl(&dm->mii, if_mii(req), cmd, NULL);
+ mutex_lock(&db->addr_lock);
+
+ spin_lock_irqsave(&db->lock, flags);
+ iow(db, DM9000_EPAR, offset);
+ iow(db, DM9000_EPDRH, data[1]);
+ iow(db, DM9000_EPDRL, data[0]);
+ iow(db, DM9000_EPCR, EPCR_WEP | EPCR_ERPRW);
+ spin_unlock_irqrestore(&db->lock, flags);
+
+ dm9000_wait_eeprom(db);
+
+ mdelay(1); /* wait at least 150uS to clear */
+
+ spin_lock_irqsave(&db->lock, flags);
+ iow(db, DM9000_EPCR, 0);
+ spin_unlock_irqrestore(&db->lock, flags);
+
+ mutex_unlock(&db->addr_lock);
}
/* ethtool ops */
return '?';
}
-#define res_size(_r) (((_r)->end - (_r)->start) + 1)
-
/*
- * Search DM9000 board, allocate space and register it
+ * Set DM9000 multicast address
*/
-static int __devinit
-dm9000_probe(struct platform_device *pdev)
+static void
+dm9000_hash_table(struct net_device *dev)
{
- struct dm9000_plat_data *pdata = pdev->dev.platform_data;
- struct board_info *db; /* Point a board information structure */
- struct net_device *ndev;
- const unsigned char *mac_src;
- int ret = 0;
- int iosize;
- int i;
- u32 id_val;
-
- /* Init network device */
- ndev = alloc_etherdev(sizeof (struct board_info));
- if (!ndev) {
- dev_err(&pdev->dev, "could not allocate device.\n");
- return -ENOMEM;
- }
+ board_info_t *db = (board_info_t *) dev->priv;
+ struct dev_mc_list *mcptr = dev->mc_list;
+ int mc_cnt = dev->mc_count;
+ int i, oft;
+ u32 hash_val;
+ u16 hash_table[4];
+ u8 rcr = RCR_DIS_LONG | RCR_DIS_CRC | RCR_RXEN;
+ unsigned long flags;
- SET_NETDEV_DEV(ndev, &pdev->dev);
+ dm9000_dbg(db, 1, "entering %s\n", __func__);
- dev_dbg(&pdev->dev, "dm9000_probe()\n");
+ spin_lock_irqsave(&db->lock, flags);
- /* setup board info structure */
- db = (struct board_info *) ndev->priv;
- memset(db, 0, sizeof (*db));
+ for (i = 0, oft = DM9000_PAR; i < 6; i++, oft++)
+ iow(db, oft, dev->dev_addr[i]);
- db->dev = &pdev->dev;
- db->ndev = ndev;
+ /* Clear Hash Table */
+ for (i = 0; i < 4; i++)
+ hash_table[i] = 0x0;
- spin_lock_init(&db->lock);
- mutex_init(&db->addr_lock);
+ /* broadcast address */
+ hash_table[3] = 0x8000;
- INIT_DELAYED_WORK(&db->phy_poll, dm9000_poll_work);
+ if (dev->flags & IFF_PROMISC)
+ rcr |= RCR_PRMSC;
- db->addr_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- db->data_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- db->irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (dev->flags & IFF_ALLMULTI)
+ rcr |= RCR_ALL;
- if (db->addr_res == NULL || db->data_res == NULL ||
- db->irq_res == NULL) {
- dev_err(db->dev, "insufficient resources\n");
- ret = -ENOENT;
- goto out;
+ /* the multicast address in Hash Table : 64 bits */
+ for (i = 0; i < mc_cnt; i++, mcptr = mcptr->next) {
+ hash_val = ether_crc_le(6, mcptr->dmi_addr) & 0x3f;
+ hash_table[hash_val / 16] |= (u16) 1 << (hash_val % 16);
}
- iosize = res_size(db->addr_res);
- db->addr_req = request_mem_region(db->addr_res->start, iosize,
- pdev->name);
-
- if (db->addr_req == NULL) {
- dev_err(db->dev, "cannot claim address reg area\n");
- ret = -EIO;
- goto out;
+ /* Write the hash table to MAC MD table */
+ for (i = 0, oft = DM9000_MAR; i < 4; i++) {
+ iow(db, oft++, hash_table[i]);
+ iow(db, oft++, hash_table[i] >> 8);
}
- db->io_addr = ioremap(db->addr_res->start, iosize);
+ iow(db, DM9000_RCR, rcr);
+ spin_unlock_irqrestore(&db->lock, flags);
+}
- if (db->io_addr == NULL) {
- dev_err(db->dev, "failed to ioremap address reg\n");
- ret = -EINVAL;
- goto out;
- }
+/*
+ * Initilize dm9000 board
+ */
+static void
+dm9000_init_dm9000(struct net_device *dev)
+{
+ board_info_t *db = dev->priv;
+ unsigned int imr;
- iosize = res_size(db->data_res);
- db->data_req = request_mem_region(db->data_res->start, iosize,
- pdev->name);
+ dm9000_dbg(db, 1, "entering %s\n", __func__);
- if (db->data_req == NULL) {
- dev_err(db->dev, "cannot claim data reg area\n");
- ret = -EIO;
- goto out;
- }
+ /* I/O mode */
+ db->io_mode = ior(db, DM9000_ISR) >> 6; /* ISR bit7:6 keeps I/O mode */
- db->io_data = ioremap(db->data_res->start, iosize);
+ /* GPIO0 on pre-activate PHY */
+ iow(db, DM9000_GPR, 0); /* REG_1F bit0 activate phyxcer */
+ iow(db, DM9000_GPCR, GPCR_GEP_CNTL); /* Let GPIO0 output */
+ iow(db, DM9000_GPR, 0); /* Enable PHY */
- if (db->io_data == NULL) {
- dev_err(db->dev, "failed to ioremap data reg\n");
- ret = -EINVAL;
- goto out;
- }
-
- /* fill in parameters for net-dev structure */
- ndev->base_addr = (unsigned long)db->io_addr;
- ndev->irq = db->irq_res->start;
-
- /* ensure at least we have a default set of IO routines */
- dm9000_set_io(db, iosize);
-
- /* check to see if anything is being over-ridden */
- if (pdata != NULL) {
- /* check to see if the driver wants to over-ride the
- * default IO width */
-
- if (pdata->flags & DM9000_PLATF_8BITONLY)
- dm9000_set_io(db, 1);
-
- if (pdata->flags & DM9000_PLATF_16BITONLY)
- dm9000_set_io(db, 2);
-
- if (pdata->flags & DM9000_PLATF_32BITONLY)
- dm9000_set_io(db, 4);
-
- /* check to see if there are any IO routine
- * over-rides */
-
- if (pdata->inblk != NULL)
- db->inblk = pdata->inblk;
-
- if (pdata->outblk != NULL)
- db->outblk = pdata->outblk;
-
- if (pdata->dumpblk != NULL)
- db->dumpblk = pdata->dumpblk;
-
- db->flags = pdata->flags;
- }
-
- dm9000_reset(db);
-
- /* try multiple times, DM9000 sometimes gets the read wrong */
- for (i = 0; i < 8; i++) {
- id_val = ior(db, DM9000_VIDL);
- id_val |= (u32)ior(db, DM9000_VIDH) << 8;
- id_val |= (u32)ior(db, DM9000_PIDL) << 16;
- id_val |= (u32)ior(db, DM9000_PIDH) << 24;
-
- if (id_val == DM9000_ID)
- break;
- dev_err(db->dev, "read wrong id 0x%08x\n", id_val);
- }
-
- if (id_val != DM9000_ID) {
- dev_err(db->dev, "wrong id: 0x%08x\n", id_val);
- ret = -ENODEV;
- goto out;
- }
-
- /* Identify what type of DM9000 we are working on */
-
- id_val = ior(db, DM9000_CHIPR);
- dev_dbg(db->dev, "dm9000 revision 0x%02x\n", id_val);
-
- switch (id_val) {
- case CHIPR_DM9000A:
- db->type = TYPE_DM9000A;
- break;
- case CHIPR_DM9000B:
- db->type = TYPE_DM9000B;
- break;
- default:
- dev_dbg(db->dev, "ID %02x => defaulting to DM9000E\n", id_val);
- db->type = TYPE_DM9000E;
- }
-
- /* from this point we assume that we have found a DM9000 */
-
- /* driver system function */
- ether_setup(ndev);
-
- ndev->open = &dm9000_open;
- ndev->hard_start_xmit = &dm9000_start_xmit;
- ndev->tx_timeout = &dm9000_timeout;
- ndev->watchdog_timeo = msecs_to_jiffies(watchdog);
- ndev->stop = &dm9000_stop;
- ndev->set_multicast_list = &dm9000_hash_table;
- ndev->ethtool_ops = &dm9000_ethtool_ops;
- ndev->do_ioctl = &dm9000_ioctl;
-
-#ifdef CONFIG_NET_POLL_CONTROLLER
- ndev->poll_controller = &dm9000_poll_controller;
-#endif
-
- db->msg_enable = NETIF_MSG_LINK;
- db->mii.phy_id_mask = 0x1f;
- db->mii.reg_num_mask = 0x1f;
- db->mii.force_media = 0;
- db->mii.full_duplex = 0;
- db->mii.dev = ndev;
- db->mii.mdio_read = dm9000_phy_read;
- db->mii.mdio_write = dm9000_phy_write;
-
- mac_src = "eeprom";
-
- /* try reading the node address from the attached EEPROM */
- for (i = 0; i < 6; i += 2)
- dm9000_read_eeprom(db, i / 2, ndev->dev_addr+i);
-
- if (!is_valid_ether_addr(ndev->dev_addr)) {
- /* try reading from mac */
-
- mac_src = "chip";
- for (i = 0; i < 6; i++)
- ndev->dev_addr[i] = ior(db, i+DM9000_PAR);
- }
-
- if (!is_valid_ether_addr(ndev->dev_addr))
- dev_warn(db->dev, "%s: Invalid ethernet MAC address. Please "
- "set using ifconfig\n", ndev->name);
-
- platform_set_drvdata(pdev, ndev);
- ret = register_netdev(ndev);
-
- if (ret == 0) {
- DECLARE_MAC_BUF(mac);
- printk(KERN_INFO "%s: dm9000%c at %p,%p IRQ %d MAC: %s (%s)\n",
- ndev->name, dm9000_type_to_char(db->type),
- db->io_addr, db->io_data, ndev->irq,
- print_mac(mac, ndev->dev_addr), mac_src);
- }
- return 0;
-
-out:
- dev_err(db->dev, "not found (%d).\n", ret);
-
- dm9000_release_board(pdev, db);
- free_netdev(ndev);
-
- return ret;
-}
-
-/*
- * Open the interface.
- * The interface is opened whenever "ifconfig" actives it.
- */
-static int
-dm9000_open(struct net_device *dev)
-{
- board_info_t *db = dev->priv;
- unsigned long irqflags = db->irq_res->flags & IRQF_TRIGGER_MASK;
-
- if (netif_msg_ifup(db))
- dev_dbg(db->dev, "enabling %s\n", dev->name);
-
- /* If there is no IRQ type specified, default to something that
- * may work, and tell the user that this is a problem */
-
- if (irqflags == IRQF_TRIGGER_NONE) {
- dev_warn(db->dev, "WARNING: no IRQ resource flags set.\n");
- irqflags = DEFAULT_TRIGGER;
- }
-
- irqflags |= IRQF_SHARED;
-
- if (request_irq(dev->irq, &dm9000_interrupt, irqflags, dev->name, dev))
- return -EAGAIN;
-
- /* Initialize DM9000 board */
- dm9000_reset(db);
- dm9000_init_dm9000(dev);
-
- /* Init driver variable */
- db->dbug_cnt = 0;
-
- mii_check_media(&db->mii, netif_msg_link(db), 1);
- netif_start_queue(dev);
-
- dm9000_schedule_poll(db);
-
- return 0;
-}
-
-/*
- * Initilize dm9000 board
- */
-static void
-dm9000_init_dm9000(struct net_device *dev)
-{
- board_info_t *db = dev->priv;
- unsigned int imr;
-
- dm9000_dbg(db, 1, "entering %s\n", __func__);
-
- /* I/O mode */
- db->io_mode = ior(db, DM9000_ISR) >> 6; /* ISR bit7:6 keeps I/O mode */
-
- /* GPIO0 on pre-activate PHY */
- iow(db, DM9000_GPR, 0); /* REG_1F bit0 activate phyxcer */
- iow(db, DM9000_GPCR, GPCR_GEP_CNTL); /* Let GPIO0 output */
- iow(db, DM9000_GPR, 0); /* Enable PHY */
-
- if (db->flags & DM9000_PLATF_EXT_PHY)
- iow(db, DM9000_NCR, NCR_EXT_PHY);
+ if (db->flags & DM9000_PLATF_EXT_PHY)
+ iow(db, DM9000_NCR, NCR_EXT_PHY);
/* Program operating register */
iow(db, DM9000_TCR, 0); /* TX Polling clear */
dev->trans_start = 0;
}
+/* Our watchdog timed out. Called by the networking layer */
+static void dm9000_timeout(struct net_device *dev)
+{
+ board_info_t *db = (board_info_t *) dev->priv;
+ u8 reg_save;
+ unsigned long flags;
+
+ /* Save previous register address */
+ reg_save = readb(db->io_addr);
+ spin_lock_irqsave(&db->lock, flags);
+
+ netif_stop_queue(dev);
+ dm9000_reset(db);
+ dm9000_init_dm9000(dev);
+ /* We can accept TX packets again */
+ dev->trans_start = jiffies;
+ netif_wake_queue(dev);
+
+ /* Restore previous register address */
+ writeb(reg_save, db->io_addr);
+ spin_unlock_irqrestore(&db->lock, flags);
+}
+
/*
* Hardware start transmission.
* Send a packet to media from the upper layer.
return 0;
}
-static void
-dm9000_shutdown(struct net_device *dev)
-{
- board_info_t *db = dev->priv;
-
- /* RESET device */
- dm9000_phy_write(dev, 0, MII_BMCR, BMCR_RESET); /* PHY RESET */
- iow(db, DM9000_GPR, 0x01); /* Power-Down PHY */
- iow(db, DM9000_IMR, IMR_PAR); /* Disable all interrupt */
- iow(db, DM9000_RCR, 0x00); /* Disable RX */
-}
-
/*
- * Stop the interface.
- * The interface is stopped when it is brought.
+ * DM9000 interrupt handler
+ * receive the packet to upper layer, free the transmitted packet
*/
-static int
-dm9000_stop(struct net_device *ndev)
+
+static void dm9000_tx_done(struct net_device *dev, board_info_t *db)
{
- board_info_t *db = ndev->priv;
+ int tx_status = ior(db, DM9000_NSR); /* Got TX status */
- if (netif_msg_ifdown(db))
- dev_dbg(db->dev, "shutting down %s\n", ndev->name);
+ if (tx_status & (NSR_TX2END | NSR_TX1END)) {
+ /* One packet sent complete */
+ db->tx_pkt_cnt--;
+ dev->stats.tx_packets++;
- cancel_delayed_work_sync(&db->phy_poll);
-
- netif_stop_queue(ndev);
- netif_carrier_off(ndev);
-
- /* free interrupt */
- free_irq(ndev->irq, ndev);
-
- dm9000_shutdown(ndev);
-
- return 0;
-}
-
-/*
- * DM9000 interrupt handler
- * receive the packet to upper layer, free the transmitted packet
- */
-
-static void
-dm9000_tx_done(struct net_device *dev, board_info_t * db)
-{
- int tx_status = ior(db, DM9000_NSR); /* Got TX status */
-
- if (tx_status & (NSR_TX2END | NSR_TX1END)) {
- /* One packet sent complete */
- db->tx_pkt_cnt--;
- dev->stats.tx_packets++;
-
- if (netif_msg_tx_done(db))
- dev_dbg(db->dev, "tx done, NSR %02x\n", tx_status);
+ if (netif_msg_tx_done(db))
+ dev_dbg(db->dev, "tx done, NSR %02x\n", tx_status);
/* Queue packet check & send */
if (db->tx_pkt_cnt > 0) {
}
}
-static irqreturn_t
-dm9000_interrupt(int irq, void *dev_id)
-{
- struct net_device *dev = dev_id;
- board_info_t *db = dev->priv;
- int int_status;
- u8 reg_save;
-
- dm9000_dbg(db, 3, "entering %s\n", __func__);
-
- /* A real interrupt coming */
-
- spin_lock(&db->lock);
-
- /* Save previous register address */
- reg_save = readb(db->io_addr);
-
- /* Disable all interrupts */
- iow(db, DM9000_IMR, IMR_PAR);
-
- /* Got DM9000 interrupt status */
- int_status = ior(db, DM9000_ISR); /* Got ISR */
- iow(db, DM9000_ISR, int_status); /* Clear ISR status */
-
- if (netif_msg_intr(db))
- dev_dbg(db->dev, "interrupt status %02x\n", int_status);
-
- /* Received the coming packet */
- if (int_status & ISR_PRS)
- dm9000_rx(dev);
-
- /* Trnasmit Interrupt check */
- if (int_status & ISR_PTS)
- dm9000_tx_done(dev, db);
-
- if (db->type != TYPE_DM9000E) {
- if (int_status & ISR_LNKCHNG) {
- /* fire a link-change request */
- schedule_delayed_work(&db->phy_poll, 1);
- }
- }
-
- /* Re-enable interrupt mask */
- iow(db, DM9000_IMR, db->imr_all);
-
- /* Restore previous register address */
- writeb(reg_save, db->io_addr);
-
- spin_unlock(&db->lock);
-
- return IRQ_HANDLED;
-}
-
struct dm9000_rxhdr {
u8 RxPktReady;
u8 RxStatus;
} while (rxbyte == DM9000_PKT_RDY);
}
-static unsigned int
-dm9000_read_locked(board_info_t *db, int reg)
+static irqreturn_t dm9000_interrupt(int irq, void *dev_id)
{
- unsigned long flags;
- unsigned int ret;
+ struct net_device *dev = dev_id;
+ board_info_t *db = dev->priv;
+ int int_status;
+ u8 reg_save;
- spin_lock_irqsave(&db->lock, flags);
- ret = ior(db, reg);
- spin_unlock_irqrestore(&db->lock, flags);
+ dm9000_dbg(db, 3, "entering %s\n", __func__);
- return ret;
-}
+ /* A real interrupt coming */
-static int dm9000_wait_eeprom(board_info_t *db)
-{
- unsigned int status;
- int timeout = 8; /* wait max 8msec */
+ spin_lock(&db->lock);
- /* The DM9000 data sheets say we should be able to
- * poll the ERRE bit in EPCR to wait for the EEPROM
- * operation. From testing several chips, this bit
- * does not seem to work.
- *
- * We attempt to use the bit, but fall back to the
- * timeout (which is why we do not return an error
- * on expiry) to say that the EEPROM operation has
- * completed.
- */
+ /* Save previous register address */
+ reg_save = readb(db->io_addr);
- while (1) {
- status = dm9000_read_locked(db, DM9000_EPCR);
+ /* Disable all interrupts */
+ iow(db, DM9000_IMR, IMR_PAR);
- if ((status & EPCR_ERRE) == 0)
- break;
+ /* Got DM9000 interrupt status */
+ int_status = ior(db, DM9000_ISR); /* Got ISR */
+ iow(db, DM9000_ISR, int_status); /* Clear ISR status */
- if (timeout-- < 0) {
- dev_dbg(db->dev, "timeout waiting EEPROM\n");
- break;
+ if (netif_msg_intr(db))
+ dev_dbg(db->dev, "interrupt status %02x\n", int_status);
+
+ /* Received the coming packet */
+ if (int_status & ISR_PRS)
+ dm9000_rx(dev);
+
+ /* Trnasmit Interrupt check */
+ if (int_status & ISR_PTS)
+ dm9000_tx_done(dev, db);
+
+ if (db->type != TYPE_DM9000E) {
+ if (int_status & ISR_LNKCHNG) {
+ /* fire a link-change request */
+ schedule_delayed_work(&db->phy_poll, 1);
}
}
- return 0;
+ /* Re-enable interrupt mask */
+ iow(db, DM9000_IMR, db->imr_all);
+
+ /* Restore previous register address */
+ writeb(reg_save, db->io_addr);
+
+ spin_unlock(&db->lock);
+
+ return IRQ_HANDLED;
}
+#ifdef CONFIG_NET_POLL_CONTROLLER
/*
- * Read a word data from EEPROM
+ *Used by netconsole
*/
-static void
-dm9000_read_eeprom(board_info_t *db, int offset, u8 *to)
+static void dm9000_poll_controller(struct net_device *dev)
{
- unsigned long flags;
-
- if (db->flags & DM9000_PLATF_NO_EEPROM) {
- to[0] = 0xff;
- to[1] = 0xff;
- return;
- }
-
- mutex_lock(&db->addr_lock);
+ disable_irq(dev->irq);
+ dm9000_interrupt(dev->irq, dev);
+ enable_irq(dev->irq);
+}
+#endif
- spin_lock_irqsave(&db->lock, flags);
+/*
+ * Open the interface.
+ * The interface is opened whenever "ifconfig" actives it.
+ */
+static int
+dm9000_open(struct net_device *dev)
+{
+ board_info_t *db = dev->priv;
+ unsigned long irqflags = db->irq_res->flags & IRQF_TRIGGER_MASK;
- iow(db, DM9000_EPAR, offset);
- iow(db, DM9000_EPCR, EPCR_ERPRR);
+ if (netif_msg_ifup(db))
+ dev_dbg(db->dev, "enabling %s\n", dev->name);
- spin_unlock_irqrestore(&db->lock, flags);
+ /* If there is no IRQ type specified, default to something that
+ * may work, and tell the user that this is a problem */
- dm9000_wait_eeprom(db);
+ if (irqflags == IRQF_TRIGGER_NONE) {
+ dev_warn(db->dev, "WARNING: no IRQ resource flags set.\n");
+ irqflags = DEFAULT_TRIGGER;
+ }
+
+ irqflags |= IRQF_SHARED;
- /* delay for at-least 150uS */
- msleep(1);
+ if (request_irq(dev->irq, &dm9000_interrupt, irqflags, dev->name, dev))
+ return -EAGAIN;
- spin_lock_irqsave(&db->lock, flags);
+ /* Initialize DM9000 board */
+ dm9000_reset(db);
+ dm9000_init_dm9000(dev);
- iow(db, DM9000_EPCR, 0x0);
+ /* Init driver variable */
+ db->dbug_cnt = 0;
- to[0] = ior(db, DM9000_EPDRL);
- to[1] = ior(db, DM9000_EPDRH);
+ mii_check_media(&db->mii, netif_msg_link(db), 1);
+ netif_start_queue(dev);
+
+ dm9000_schedule_poll(db);
- spin_unlock_irqrestore(&db->lock, flags);
+ return 0;
+}
- mutex_unlock(&db->addr_lock);
+/*
+ * Sleep, either by using msleep() or if we are suspending, then
+ * use mdelay() to sleep.
+ */
+static void dm9000_msleep(board_info_t *db, unsigned int ms)
+{
+ if (db->in_suspend)
+ mdelay(ms);
+ else
+ msleep(ms);
}
/*
- * Write a word data to SROM
+ * Read a word from phyxcer
*/
-static void
-dm9000_write_eeprom(board_info_t *db, int offset, u8 *data)
+static int
+dm9000_phy_read(struct net_device *dev, int phy_reg_unused, int reg)
{
+ board_info_t *db = (board_info_t *) dev->priv;
unsigned long flags;
-
- if (db->flags & DM9000_PLATF_NO_EEPROM)
- return;
+ unsigned int reg_save;
+ int ret;
mutex_lock(&db->addr_lock);
- spin_lock_irqsave(&db->lock, flags);
- iow(db, DM9000_EPAR, offset);
- iow(db, DM9000_EPDRH, data[1]);
- iow(db, DM9000_EPDRL, data[0]);
- iow(db, DM9000_EPCR, EPCR_WEP | EPCR_ERPRW);
- spin_unlock_irqrestore(&db->lock, flags);
+ spin_lock_irqsave(&db->lock,flags);
- dm9000_wait_eeprom(db);
+ /* Save previous register address */
+ reg_save = readb(db->io_addr);
- mdelay(1); /* wait at least 150uS to clear */
+ /* Fill the phyxcer register into REG_0C */
+ iow(db, DM9000_EPAR, DM9000_PHY | reg);
- spin_lock_irqsave(&db->lock, flags);
- iow(db, DM9000_EPCR, 0);
- spin_unlock_irqrestore(&db->lock, flags);
+ iow(db, DM9000_EPCR, 0xc); /* Issue phyxcer read command */
- mutex_unlock(&db->addr_lock);
-}
-
-/*
- * Set DM9000 multicast address
- */
-static void
-dm9000_hash_table(struct net_device *dev)
-{
- board_info_t *db = (board_info_t *) dev->priv;
- struct dev_mc_list *mcptr = dev->mc_list;
- int mc_cnt = dev->mc_count;
- int i, oft;
- u32 hash_val;
- u16 hash_table[4];
- u8 rcr = RCR_DIS_LONG | RCR_DIS_CRC | RCR_RXEN;
- unsigned long flags;
-
- dm9000_dbg(db, 1, "entering %s\n", __func__);
-
- spin_lock_irqsave(&db->lock, flags);
-
- for (i = 0, oft = DM9000_PAR; i < 6; i++, oft++)
- iow(db, oft, dev->dev_addr[i]);
-
- /* Clear Hash Table */
- for (i = 0; i < 4; i++)
- hash_table[i] = 0x0;
-
- /* broadcast address */
- hash_table[3] = 0x8000;
-
- if (dev->flags & IFF_PROMISC)
- rcr |= RCR_PRMSC;
-
- if (dev->flags & IFF_ALLMULTI)
- rcr |= RCR_ALL;
-
- /* the multicast address in Hash Table : 64 bits */
- for (i = 0; i < mc_cnt; i++, mcptr = mcptr->next) {
- hash_val = ether_crc_le(6, mcptr->dmi_addr) & 0x3f;
- hash_table[hash_val / 16] |= (u16) 1 << (hash_val % 16);
- }
-
- /* Write the hash table to MAC MD table */
- for (i = 0, oft = DM9000_MAR; i < 4; i++) {
- iow(db, oft++, hash_table[i]);
- iow(db, oft++, hash_table[i] >> 8);
- }
-
- iow(db, DM9000_RCR, rcr);
- spin_unlock_irqrestore(&db->lock, flags);
-}
-
-
-/*
- * Sleep, either by using msleep() or if we are suspending, then
- * use mdelay() to sleep.
- */
-static void dm9000_msleep(board_info_t *db, unsigned int ms)
-{
- if (db->in_suspend)
- mdelay(ms);
- else
- msleep(ms);
-}
-
-/*
- * Read a word from phyxcer
- */
-static int
-dm9000_phy_read(struct net_device *dev, int phy_reg_unused, int reg)
-{
- board_info_t *db = (board_info_t *) dev->priv;
- unsigned long flags;
- unsigned int reg_save;
- int ret;
-
- mutex_lock(&db->addr_lock);
-
- spin_lock_irqsave(&db->lock,flags);
-
- /* Save previous register address */
- reg_save = readb(db->io_addr);
-
- /* Fill the phyxcer register into REG_0C */
- iow(db, DM9000_EPAR, DM9000_PHY | reg);
-
- iow(db, DM9000_EPCR, 0xc); /* Issue phyxcer read command */
-
- writeb(reg_save, db->io_addr);
- spin_unlock_irqrestore(&db->lock,flags);
+ writeb(reg_save, db->io_addr);
+ spin_unlock_irqrestore(&db->lock,flags);
dm9000_msleep(db, 1); /* Wait read complete */
mutex_unlock(&db->addr_lock);
}
+static void
+dm9000_shutdown(struct net_device *dev)
+{
+ board_info_t *db = dev->priv;
+
+ /* RESET device */
+ dm9000_phy_write(dev, 0, MII_BMCR, BMCR_RESET); /* PHY RESET */
+ iow(db, DM9000_GPR, 0x01); /* Power-Down PHY */
+ iow(db, DM9000_IMR, IMR_PAR); /* Disable all interrupt */
+ iow(db, DM9000_RCR, 0x00); /* Disable RX */
+}
+
+/*
+ * Stop the interface.
+ * The interface is stopped when it is brought.
+ */
+static int
+dm9000_stop(struct net_device *ndev)
+{
+ board_info_t *db = ndev->priv;
+
+ if (netif_msg_ifdown(db))
+ dev_dbg(db->dev, "shutting down %s\n", ndev->name);
+
+ cancel_delayed_work_sync(&db->phy_poll);
+
+ netif_stop_queue(ndev);
+ netif_carrier_off(ndev);
+
+ /* free interrupt */
+ free_irq(ndev->irq, ndev);
+
+ dm9000_shutdown(ndev);
+
+ return 0;
+}
+
+#define res_size(_r) (((_r)->end - (_r)->start) + 1)
+
+/*
+ * Search DM9000 board, allocate space and register it
+ */
+static int __devinit
+dm9000_probe(struct platform_device *pdev)
+{
+ struct dm9000_plat_data *pdata = pdev->dev.platform_data;
+ struct board_info *db; /* Point a board information structure */
+ struct net_device *ndev;
+ const unsigned char *mac_src;
+ int ret = 0;
+ int iosize;
+ int i;
+ u32 id_val;
+
+ /* Init network device */
+ ndev = alloc_etherdev(sizeof(struct board_info));
+ if (!ndev) {
+ dev_err(&pdev->dev, "could not allocate device.\n");
+ return -ENOMEM;
+ }
+
+ SET_NETDEV_DEV(ndev, &pdev->dev);
+
+ dev_dbg(&pdev->dev, "dm9000_probe()\n");
+
+ /* setup board info structure */
+ db = ndev->priv;
+ memset(db, 0, sizeof(*db));
+
+ db->dev = &pdev->dev;
+ db->ndev = ndev;
+
+ spin_lock_init(&db->lock);
+ mutex_init(&db->addr_lock);
+
+ INIT_DELAYED_WORK(&db->phy_poll, dm9000_poll_work);
+
+ db->addr_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ db->data_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ db->irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+
+ if (db->addr_res == NULL || db->data_res == NULL ||
+ db->irq_res == NULL) {
+ dev_err(db->dev, "insufficient resources\n");
+ ret = -ENOENT;
+ goto out;
+ }
+
+ iosize = res_size(db->addr_res);
+ db->addr_req = request_mem_region(db->addr_res->start, iosize,
+ pdev->name);
+
+ if (db->addr_req == NULL) {
+ dev_err(db->dev, "cannot claim address reg area\n");
+ ret = -EIO;
+ goto out;
+ }
+
+ db->io_addr = ioremap(db->addr_res->start, iosize);
+
+ if (db->io_addr == NULL) {
+ dev_err(db->dev, "failed to ioremap address reg\n");
+ ret = -EINVAL;
+ goto out;
+ }
+
+ iosize = res_size(db->data_res);
+ db->data_req = request_mem_region(db->data_res->start, iosize,
+ pdev->name);
+
+ if (db->data_req == NULL) {
+ dev_err(db->dev, "cannot claim data reg area\n");
+ ret = -EIO;
+ goto out;
+ }
+
+ db->io_data = ioremap(db->data_res->start, iosize);
+
+ if (db->io_data == NULL) {
+ dev_err(db->dev, "failed to ioremap data reg\n");
+ ret = -EINVAL;
+ goto out;
+ }
+
+ /* fill in parameters for net-dev structure */
+ ndev->base_addr = (unsigned long)db->io_addr;
+ ndev->irq = db->irq_res->start;
+
+ /* ensure at least we have a default set of IO routines */
+ dm9000_set_io(db, iosize);
+
+ /* check to see if anything is being over-ridden */
+ if (pdata != NULL) {
+ /* check to see if the driver wants to over-ride the
+ * default IO width */
+
+ if (pdata->flags & DM9000_PLATF_8BITONLY)
+ dm9000_set_io(db, 1);
+
+ if (pdata->flags & DM9000_PLATF_16BITONLY)
+ dm9000_set_io(db, 2);
+
+ if (pdata->flags & DM9000_PLATF_32BITONLY)
+ dm9000_set_io(db, 4);
+
+ /* check to see if there are any IO routine
+ * over-rides */
+
+ if (pdata->inblk != NULL)
+ db->inblk = pdata->inblk;
+
+ if (pdata->outblk != NULL)
+ db->outblk = pdata->outblk;
+
+ if (pdata->dumpblk != NULL)
+ db->dumpblk = pdata->dumpblk;
+
+ db->flags = pdata->flags;
+ }
+
+ dm9000_reset(db);
+
+ /* try multiple times, DM9000 sometimes gets the read wrong */
+ for (i = 0; i < 8; i++) {
+ id_val = ior(db, DM9000_VIDL);
+ id_val |= (u32)ior(db, DM9000_VIDH) << 8;
+ id_val |= (u32)ior(db, DM9000_PIDL) << 16;
+ id_val |= (u32)ior(db, DM9000_PIDH) << 24;
+
+ if (id_val == DM9000_ID)
+ break;
+ dev_err(db->dev, "read wrong id 0x%08x\n", id_val);
+ }
+
+ if (id_val != DM9000_ID) {
+ dev_err(db->dev, "wrong id: 0x%08x\n", id_val);
+ ret = -ENODEV;
+ goto out;
+ }
+
+ /* Identify what type of DM9000 we are working on */
+
+ id_val = ior(db, DM9000_CHIPR);
+ dev_dbg(db->dev, "dm9000 revision 0x%02x\n", id_val);
+
+ switch (id_val) {
+ case CHIPR_DM9000A:
+ db->type = TYPE_DM9000A;
+ break;
+ case CHIPR_DM9000B:
+ db->type = TYPE_DM9000B;
+ break;
+ default:
+ dev_dbg(db->dev, "ID %02x => defaulting to DM9000E\n", id_val);
+ db->type = TYPE_DM9000E;
+ }
+
+ /* from this point we assume that we have found a DM9000 */
+
+ /* driver system function */
+ ether_setup(ndev);
+
+ ndev->open = &dm9000_open;
+ ndev->hard_start_xmit = &dm9000_start_xmit;
+ ndev->tx_timeout = &dm9000_timeout;
+ ndev->watchdog_timeo = msecs_to_jiffies(watchdog);
+ ndev->stop = &dm9000_stop;
+ ndev->set_multicast_list = &dm9000_hash_table;
+ ndev->ethtool_ops = &dm9000_ethtool_ops;
+ ndev->do_ioctl = &dm9000_ioctl;
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ ndev->poll_controller = &dm9000_poll_controller;
+#endif
+
+ db->msg_enable = NETIF_MSG_LINK;
+ db->mii.phy_id_mask = 0x1f;
+ db->mii.reg_num_mask = 0x1f;
+ db->mii.force_media = 0;
+ db->mii.full_duplex = 0;
+ db->mii.dev = ndev;
+ db->mii.mdio_read = dm9000_phy_read;
+ db->mii.mdio_write = dm9000_phy_write;
+
+ mac_src = "eeprom";
+
+ /* try reading the node address from the attached EEPROM */
+ for (i = 0; i < 6; i += 2)
+ dm9000_read_eeprom(db, i / 2, ndev->dev_addr+i);
+
+ if (!is_valid_ether_addr(ndev->dev_addr)) {
+ /* try reading from mac */
+
+ mac_src = "chip";
+ for (i = 0; i < 6; i++)
+ ndev->dev_addr[i] = ior(db, i+DM9000_PAR);
+ }
+
+ if (!is_valid_ether_addr(ndev->dev_addr))
+ dev_warn(db->dev, "%s: Invalid ethernet MAC address. Please "
+ "set using ifconfig\n", ndev->name);
+
+ platform_set_drvdata(pdev, ndev);
+ ret = register_netdev(ndev);
+
+ if (ret == 0) {
+ DECLARE_MAC_BUF(mac);
+ printk(KERN_INFO "%s: dm9000%c at %p,%p IRQ %d MAC: %s (%s)\n",
+ ndev->name, dm9000_type_to_char(db->type),
+ db->io_addr, db->io_data, ndev->irq,
+ print_mac(mac, ndev->dev_addr), mac_src);
+ }
+ return 0;
+
+out:
+ dev_err(db->dev, "not found (%d).\n", ret);
+
+ dm9000_release_board(pdev, db);
+ free_netdev(ndev);
+
+ return ret;
+}
+
static int
dm9000_drv_suspend(struct platform_device *dev, pm_message_t state)
{
projects / linux-2.6-omap-h63xx.git / commitdiff