]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
usb: musb: Fix for isochronous IN transfer
authorAjay Kumar Gupta <ajay.gupta@ti.com>
Wed, 29 Oct 2008 13:10:31 +0000 (15:10 +0200)
committerGreg Kroah-Hartman <gregkh@suse.de>
Thu, 13 Nov 2008 22:45:00 +0000 (14:45 -0800)
Fixes blurred capture images in dma mode. Isochronous error field in
urb and source data buffer pointer were not updated properly in dma
mode.

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/usb/musb/musb_host.c

index 3133990f04ec868fcb0809cd233535f3fc562ff2..981d49738ec5e2648dcb944e9aa45cdccc51565b 100644 (file)
@@ -1507,10 +1507,29 @@ void musb_host_rx(struct musb *musb, u8 epnum)
                musb_writew(hw_ep->regs, MUSB_RXCSR, val);
 
 #ifdef CONFIG_USB_INVENTRA_DMA
+               if (usb_pipeisoc(pipe)) {
+                       struct usb_iso_packet_descriptor *d;
+
+                       d = urb->iso_frame_desc + qh->iso_idx;
+                       d->actual_length = xfer_len;
+
+                       /* even if there was an error, we did the dma
+                        * for iso_frame_desc->length
+                        */
+                       if (d->status != EILSEQ && d->status != -EOVERFLOW)
+                               d->status = 0;
+
+                       if (++qh->iso_idx >= urb->number_of_packets)
+                               done = true;
+                       else
+                               done = false;
+
+               } else  {
                /* done if urb buffer is full or short packet is recd */
                done = (urb->actual_length + xfer_len >=
                                urb->transfer_buffer_length
                        || dma->actual_len < qh->maxpacket);
+               }
 
                /* send IN token for next packet, without AUTOREQ */
                if (!done) {
@@ -1547,7 +1566,8 @@ void musb_host_rx(struct musb *musb, u8 epnum)
                if (dma) {
                        struct dma_controller   *c;
                        u16                     rx_count;
-                       int                     ret;
+                       int                     ret, length;
+                       dma_addr_t              buf;
 
                        rx_count = musb_readw(epio, MUSB_RXCOUNT);
 
@@ -1560,6 +1580,35 @@ void musb_host_rx(struct musb *musb, u8 epnum)
 
                        c = musb->dma_controller;
 
+                       if (usb_pipeisoc(pipe)) {
+                               int status = 0;
+                               struct usb_iso_packet_descriptor *d;
+
+                               d = urb->iso_frame_desc + qh->iso_idx;
+
+                               if (iso_err) {
+                                       status = -EILSEQ;
+                                       urb->error_count++;
+                               }
+                               if (rx_count > d->length) {
+                                       if (status == 0) {
+                                               status = -EOVERFLOW;
+                                               urb->error_count++;
+                                       }
+                                       DBG(2, "** OVERFLOW %d into %d\n",\
+                                           rx_count, d->length);
+
+                                       length = d->length;
+                               } else
+                                       length = rx_count;
+                               d->status = status;
+                               buf = urb->transfer_dma + d->offset;
+                       } else {
+                               length = rx_count;
+                               buf = urb->transfer_dma +
+                                               urb->actual_length;
+                       }
+
                        dma->desired_mode = 0;
 #ifdef USE_MODE1
                        /* because of the issue below, mode 1 will
@@ -1571,6 +1620,12 @@ void musb_host_rx(struct musb *musb, u8 epnum)
                                                urb->actual_length)
                                        > qh->maxpacket)
                                dma->desired_mode = 1;
+                       if (rx_count < hw_ep->max_packet_sz_rx) {
+                               length = rx_count;
+                               dma->bDesiredMode = 0;
+                       } else {
+                               length = urb->transfer_buffer_length;
+                       }
 #endif
 
 /* Disadvantage of using mode 1:
@@ -1608,12 +1663,7 @@ void musb_host_rx(struct musb *musb, u8 epnum)
                         */
                        ret = c->channel_program(
                                dma, qh->maxpacket,
-                               dma->desired_mode,
-                               urb->transfer_dma
-                                       + urb->actual_length,
-                               (dma->desired_mode == 0)
-                                       ? rx_count
-                                       : urb->transfer_buffer_length);
+                               dma->desired_mode, buf, length);
 
                        if (!ret) {
                                c->channel_release(dma);
@@ -1631,19 +1681,6 @@ void musb_host_rx(struct musb *musb, u8 epnum)
                }
        }
 
-       if (dma && usb_pipeisoc(pipe)) {
-               struct usb_iso_packet_descriptor        *d;
-               int                                     iso_stat = status;
-
-               d = urb->iso_frame_desc + qh->iso_idx;
-               d->actual_length += xfer_len;
-               if (iso_err) {
-                       iso_stat = -EILSEQ;
-                       urb->error_count++;
-               }
-               d->status = iso_stat;
-       }
-
 finish:
        urb->actual_length += xfer_len;
        qh->offset += xfer_len;