]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
V4L/DVB (5217): Zl10353: Implement TRL nominal rate calculation
authorAntti Palosaari <crope@iki.fi>
Sat, 10 Feb 2007 13:19:11 +0000 (10:19 -0300)
committerMauro Carvalho Chehab <mchehab@infradead.org>
Wed, 21 Feb 2007 15:35:24 +0000 (13:35 -0200)
Implement trl nominal rate calculation to Zarlink ZL10353 demod,
based on calculation used in Zarlink MT352.
This adds support for 6 and 8MHz bandwidth transponders.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
drivers/media/dvb/frontends/zl10353.c
drivers/media/dvb/frontends/zl10353.h
drivers/media/dvb/frontends/zl10353_priv.h

index 50dac2054353836dd66560eb30042520d46515af..dbb53ba6f4144e014272e81fe6737b894da7368d 100644 (file)
@@ -38,6 +38,12 @@ struct zl10353_state {
        struct zl10353_config config;
 };
 
+static int debug;
+#define dprintk(args...) \
+       do { \
+               if (debug) printk(KERN_DEBUG "zl10353: " args); \
+       } while (0)
+
 static int debug_regs = 0;
 
 static int zl10353_single_write(struct dvb_frontend *fe, u8 reg, u8 val)
@@ -113,6 +119,36 @@ static void zl10353_dump_regs(struct dvb_frontend *fe)
        printk(KERN_DEBUG "%s\n", buf);
 }
 
+static void zl10353_calc_nominal_rate(struct dvb_frontend *fe,
+                                     enum fe_bandwidth bandwidth,
+                                     u16 *nominal_rate)
+{
+       u32 adc_clock = 22528; /* 20.480 MHz on the board(!?) */
+       u8 bw;
+       struct zl10353_state *state = fe->demodulator_priv;
+
+       if (state->config.adc_clock)
+               adc_clock = state->config.adc_clock;
+
+       switch (bandwidth) {
+       case BANDWIDTH_6_MHZ:
+               bw = 6;
+               break;
+       case BANDWIDTH_7_MHZ:
+               bw = 7;
+               break;
+       case BANDWIDTH_8_MHZ:
+       default:
+               bw = 8;
+               break;
+       }
+
+       *nominal_rate = (64 * bw * (1<<16) / (7 * 8) * 4000 / adc_clock + 2) / 4;
+
+       dprintk("%s: bw %d, adc_clock %d => 0x%x\n",
+               __FUNCTION__, bw, adc_clock, *nominal_rate);
+}
+
 static int zl10353_sleep(struct dvb_frontend *fe)
 {
        static u8 zl10353_softdown[] = { 0x50, 0x0C, 0x44 };
@@ -125,7 +161,7 @@ static int zl10353_set_parameters(struct dvb_frontend *fe,
                                  struct dvb_frontend_parameters *param)
 {
        struct zl10353_state *state = fe->demodulator_priv;
-
+       u16 nominal_rate;
        u8 pllbuf[6] = { 0x67 };
 
        /* These settings set "auto-everything" and start the FSM. */
@@ -138,8 +174,11 @@ static int zl10353_set_parameters(struct dvb_frontend *fe,
        zl10353_single_write(fe, 0x56, 0x28);
        zl10353_single_write(fe, 0x89, 0x20);
        zl10353_single_write(fe, 0x5E, 0x00);
-       zl10353_single_write(fe, 0x65, 0x5A);
-       zl10353_single_write(fe, 0x66, 0xE9);
+
+       zl10353_calc_nominal_rate(fe, param->u.ofdm.bandwidth, &nominal_rate);
+       zl10353_single_write(fe, TRL_NOMINAL_RATE_1, msb(nominal_rate));
+       zl10353_single_write(fe, TRL_NOMINAL_RATE_0, lsb(nominal_rate));
+
        zl10353_single_write(fe, 0x6C, 0xCD);
        zl10353_single_write(fe, 0x6D, 0x7E);
        if (fe->ops.i2c_gate_ctrl)
@@ -377,6 +416,9 @@ static struct dvb_frontend_ops zl10353_ops = {
        .read_ucblocks = zl10353_read_ucblocks,
 };
 
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
+
 module_param(debug_regs, int, 0644);
 MODULE_PARM_DESC(debug_regs, "Turn on/off frontend register dumps (default:off).");
 
index 0bc0109737f1b54380a2bca47dbd2b9137c4e0be..cb274dc12b82596ead31dfd1f5bf5667197992d5 100644 (file)
@@ -29,6 +29,9 @@ struct zl10353_config
        /* demodulator's I2C address */
        u8 demod_address;
 
+       /* frequencies in kHz */
+       int adc_clock;  // default: 22528
+
        /* set if no pll is connected to the secondary i2c bus */
        int no_tuner;
 
index b72224bd7ddebb512539c7daa43a6cc53922ac5b..d2186927f8f19a53d4363d8641bc252015c9d74a 100644 (file)
 
 #define ID_ZL10353     0x14
 
+#define msb(x) (((x) >> 8) & 0xff)
+#define lsb(x) ((x) & 0xff)
+
 enum zl10353_reg_addr {
-       INTERRUPT_0     = 0x00,
-       INTERRUPT_1     = 0x01,
-       INTERRUPT_2     = 0x02,
-       INTERRUPT_3     = 0x03,
-       INTERRUPT_4     = 0x04,
-       INTERRUPT_5     = 0x05,
-       STATUS_6        = 0x06,
-       STATUS_7        = 0x07,
-       STATUS_8        = 0x08,
-       STATUS_9        = 0x09,
-       SNR             = 0x10,
-       CHIP_ID         = 0x7F,
+       INTERRUPT_0        = 0x00,
+       INTERRUPT_1        = 0x01,
+       INTERRUPT_2        = 0x02,
+       INTERRUPT_3        = 0x03,
+       INTERRUPT_4        = 0x04,
+       INTERRUPT_5        = 0x05,
+       STATUS_6           = 0x06,
+       STATUS_7           = 0x07,
+       STATUS_8           = 0x08,
+       STATUS_9           = 0x09,
+       SNR                = 0x10,
+       TRL_NOMINAL_RATE_1 = 0x65,
+       TRL_NOMINAL_RATE_0 = 0x66,
+       CHIP_ID            = 0x7F,
 };
 
 #endif                          /* _ZL10353_PRIV_ */