Blackfin arch: Set TWI/I2C Clock to 100kHz

All slaves I'm aware of should support at least 100kHz

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

diff --git a/arch/blackfin/configs/BF518F-EZBRD_defconfig b/arch/blackfin/configs/BF518F-EZBRD_defconfig
index 123281b9d38d75136d5a96f85854ebc5a5405ae5..b3286af8c8f7ac9db8b1b5941a07f09d44ee9a06 100644 (file)
--- a/arch/blackfin/configs/BF518F-EZBRD_defconfig
+++ b/arch/blackfin/configs/BF518F-EZBRD_defconfig
@@ -722,7 +722,7 @@ CONFIG_I2C_HELPER_AUTO=y
 # I2C Hardware Bus support
 #
 CONFIG_I2C_BLACKFIN_TWI=y
-CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
+CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set

diff --git a/arch/blackfin/configs/BF526-EZBRD_defconfig b/arch/blackfin/configs/BF526-EZBRD_defconfig
index 48a6c35203d9218b9e78798e7d1aa584e70b3214..19ec29d1f95155bf2a451a8cd68e636cfdc316e8 100644 (file)
--- a/arch/blackfin/configs/BF526-EZBRD_defconfig
+++ b/arch/blackfin/configs/BF526-EZBRD_defconfig
@@ -761,7 +761,7 @@ CONFIG_I2C_HELPER_AUTO=y
 # I2C Hardware Bus support
 #
 CONFIG_I2C_BLACKFIN_TWI=y
-CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
+CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set

diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig
index 060bac21b79baefc2001c20241583ab13b8419a6..7cfec339a3f894f3d5a275d54e00cc20227cc602 100644 (file)
--- a/arch/blackfin/configs/BF527-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF527-EZKIT_defconfig
@@ -793,7 +793,7 @@ CONFIG_I2C_CHARDEV=m
 # I2C Hardware Bus support
 #
 CONFIG_I2C_BLACKFIN_TWI=m
-CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
+CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set

diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig
index a56cf33074287ee83944bedce54d9233f95af7c4..195177b56accde200dccd6cf806b1f9033f0b4fa 100644 (file)
--- a/arch/blackfin/configs/BF537-STAMP_defconfig
+++ b/arch/blackfin/configs/BF537-STAMP_defconfig
@@ -747,7 +747,7 @@ CONFIG_I2C_CHARDEV=m
 # I2C Hardware Bus support
 #
 CONFIG_I2C_BLACKFIN_TWI=m
-CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
+CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set

diff --git a/arch/blackfin/configs/BF538-EZKIT_defconfig b/arch/blackfin/configs/BF538-EZKIT_defconfig
index 66639887506a478749989ce9421667fdb0caa81d..e84dbebeb80a1ec0355ef95faf295e97524312a9 100644 (file)
--- a/arch/blackfin/configs/BF538-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF538-EZKIT_defconfig
@@ -769,7 +769,7 @@ CONFIG_I2C_HELPER_AUTO=y
 # I2C Hardware Bus support
 #
 CONFIG_I2C_BLACKFIN_TWI=y
-CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
+CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set

diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig
index 92fa18dce42033e1d0ff9377a5b290d194abe68e..8803455dadf4716101e526de115b49733c3bfd6b 100644 (file)
--- a/arch/blackfin/configs/BF548-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF548-EZKIT_defconfig
@@ -876,7 +876,7 @@ CONFIG_I2C_CHARDEV=y
 # I2C Hardware Bus support
 #
 CONFIG_I2C_BLACKFIN_TWI=y
-CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
+CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set

diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig
index 4f713f0ee2a56e84c56631ca0ac0c118f991eec3..0043da5f49385f0cd3bf84075d578cdd2ba535d0 100644 (file)
--- a/arch/blackfin/configs/CM-BF527_defconfig
+++ b/arch/blackfin/configs/CM-BF527_defconfig
@@ -699,7 +699,7 @@ CONFIG_I2C_CHARDEV=m
 # I2C Hardware Bus support
 #
 CONFIG_I2C_BLACKFIN_TWI=m
-CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
+CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set

diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig
index 2e91e492aca2218c2ff83709fb0e5baf5fe3018e..6a8552f8afb77ef89f99e39955af0268ed416b00 100644 (file)
--- a/arch/blackfin/configs/CM-BF548_defconfig
+++ b/arch/blackfin/configs/CM-BF548_defconfig
@@ -782,7 +782,7 @@ CONFIG_I2C_CHARDEV=y
 # I2C Hardware Bus support
 #
 CONFIG_I2C_BLACKFIN_TWI=y
-CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
+CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set

diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig
index 559deed13920ddb63075cdda458d9e5faa18f121..648edd99a94e13b9090d86e715d80b379afffc9b 100644 (file)
--- a/arch/blackfin/configs/PNAV-10_defconfig
+++ b/arch/blackfin/configs/PNAV-10_defconfig
@@ -749,7 +749,7 @@ CONFIG_I2C_CHARDEV=y
 #
 # CONFIG_I2C_BLACKFIN_GPIO is not set
 CONFIG_I2C_BLACKFIN_TWI=y
-CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
+CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set

diff --git a/arch/blackfin/configs/SRV1_defconfig b/arch/blackfin/configs/SRV1_defconfig
index 9fa880e1ebff40bc1a7dc9943ddba3e5b30d284c..ffa2396e61213458dc22631c1c5ee4d13b8ddde6 100644 (file)
--- a/arch/blackfin/configs/SRV1_defconfig
+++ b/arch/blackfin/configs/SRV1_defconfig
@@ -785,7 +785,7 @@ CONFIG_I2C_CHARDEV=y
 #
 # CONFIG_I2C_BLACKFIN_GPIO is not set
 CONFIG_I2C_BLACKFIN_TWI=y
-CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
+CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set