A patch from Russell to sync includes with mainline tree.
Signed-off-by: Tony Lindgren <tony@atomide.com>
#include <linux/i2c/twl4030.h>
#include <linux/err.h>
#include <linux/clk.h>
+#include <linux/io.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <mach/gpmc.h>
#include <mach/mcspi.h>
-#include <asm/io.h>
#include "mmc-twl4030.h"
#include <linux/input.h>
#include <linux/err.h>
#include <linux/clk.h>
+#include <linux/io.h>
#include <linux/i2c.h>
#include <linux/i2c/at24.h>
#include <linux/i2c/menelaus.h>
#include <mach/dma.h>
#include <mach/gpmc.h>
-#include <asm/io.h>
-
-
#define H4_FLASH_CS 0
#define H4_SMC91X_CS 1
#include <linux/errno.h>
#include <linux/delay.h>
#include <linux/clk.h>
-#include <linux/bitops.h>
#include <linux/io.h>
+#include <linux/bitops.h>
#include <mach/clock.h>
#include <mach/clockdomain.h>
#include <linux/errno.h>
#include <linux/delay.h>
#include <linux/clk.h>
-#include <linux/bitops.h>
#include <linux/io.h>
#include <linux/cpufreq.h>
+#include <linux/bitops.h>
#include <mach/common.h>
#include <mach/clock.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/limits.h>
+#include <linux/bitops.h>
#include <mach/clock.h>
#include <mach/sram.h>
#include <asm/div64.h>
-#include <asm/bitops.h>
#include <mach/sdrc.h>
#include "clock.h"
#include <linux/clk.h>
#include <linux/ioport.h>
#include <linux/spinlock.h>
-#include <linux/module.h>
#include <linux/io.h>
+#include <linux/module.h>
#include <asm/mach-types.h>
#include <mach/gpmc.h>
*/
#include <linux/module.h>
#include <linux/init.h>
-#include <asm/system.h>
#include <linux/io.h>
#include <linux/spinlock.h>
+#include <asm/system.h>
+
#include <mach/control.h>
#include <mach/mux.h>
#include <linux/serial_8250.h>
#include <linux/serial_reg.h>
#include <linux/clk.h>
-
#include <linux/io.h>
#include <mach/common.h>
#include <linux/serial_8250.h>
#include <linux/serial_reg.h>
#include <linux/clk.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm/mach/map.h>
-#include <asm/io.h>
#include <asm/setup.h>
#include <mach/common.h>
void (*set_power)(struct omap_pwm_led_platform_data *self, int on_off);
};
-/* See include/asm-arm/arch-omap/gpio-switch.h for definitions */
+/* See arch/arm/plat-omap/include/mach/gpio-switch.h for definitions */
struct omap_gpio_switch_config {
char name[12];
u16 gpio;
/*
- * include/asm-arm/arch-omap/control.h
+ * arch/arm/plat-omap/include/mach/control.h
*
* OMAP2/3 System Control Module definitions
*
/*
- * include/asm-arm/arch-omap/entry-macro.S
+ * arch/arm/plat-omap/include/mach/entry-macro.S
*
* Low-level IRQ helper macros for OMAP-based platforms
*
* Copyright (C) 2000 RidgeRun, Inc.
* Author: Greg Lonnon <glonnon@ridgerun.com>
*
- * This file was derived from linux/include/asm-arm/arch-intergrator/memory.h
+ * This file was derived from arch/arm/mach-intergrator/include/mach/memory.h
* Copyright (C) 1999 ARM Limited
*
* This program is free software; you can redistribute it and/or modify it
/*
- * include/asm-arm/arch-omap/omap24xx.h
+ * arch/arm/plat-omap/include/mach/omap24xx.h
*
* This file contains the processor specific definitions
* of the TI OMAP24XX.
/*
- * include/asm-arm/arch-omap/omap34xx.h
+ * arch/arm/plat-omap/include/mach/omap34xx.h
*
* This file contains the processor specific definitions of the TI OMAP34XX.
*
/*
- * File: include/asm-arm/arch-omap/omapfb.h
+ * File: arch/arm/plat-omap/include/mach/omapfb.h
*
* Framebuffer driver for TI OMAP boards
*
/*
- * Copied from linux/include/asm-arm/arch-sa1100/system.h
+ * Copied from arch/arm/mach-sa1100/include/mach/system.h
* Copyright (c) 1999 Nicolas Pitre <nico@cam.org>
*/
#ifndef __ASM_ARCH_SYSTEM_H
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/io.h>
#include <asm/tlb.h>
-#include <asm/io.h>
#include <asm/cacheflush.h>
#include <asm/mach/map.h>