]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
[PATCH] adm8211: Use revision from pci_dev
authorMichael Wu <flamingice@sourmilk.net>
Mon, 24 Sep 2007 22:10:25 +0000 (18:10 -0400)
committerDavid S. Miller <davem@sunset.davemloft.net>
Wed, 10 Oct 2007 23:53:09 +0000 (16:53 -0700)
No need to load the revision ourselves anymore.

Signed-off-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/adm8211.c
drivers/net/wireless/adm8211.h

index ce1f8e304eaa3b76ccfeed6d68c07b10b6d4a87a..e950a7d557112c8df9c7bf31fbdc95d65a3db5fa 100644 (file)
@@ -117,7 +117,7 @@ static int adm8211_read_eeprom(struct ieee80211_hw *dev)
                break;
 
        default:
-               if (priv->revid < ADM8211_REV_CA)
+               if (priv->pdev->revision < ADM8211_REV_CA)
                        priv->rf_type = ADM8211_TYPE_RFMD;
                else
                        priv->rf_type = ADM8211_TYPE_AIROHA;
@@ -135,7 +135,7 @@ static int adm8211_read_eeprom(struct ieee80211_hw *dev)
        case ADM8211_TYPE_ADMTEK:
                break;
        default:
-               if (priv->revid < ADM8211_REV_CA)
+               if (priv->pdev->revision < ADM8211_REV_CA)
                        priv->bbp_type = ADM8211_TYPE_RFMD;
                else
                        priv->bbp_type = ADM8211_TYPE_ADMTEK;
@@ -175,7 +175,7 @@ static int adm8211_read_eeprom(struct ieee80211_hw *dev)
                break;
 
        default:
-               if (priv->revid < ADM8211_REV_CA)
+               if (priv->pdev->revision < ADM8211_REV_CA)
                        priv->specific_bbptype = ADM8211_BBP_RFMD3000;
                else
                        priv->specific_bbptype = ADM8211_BBP_ADM8011;
@@ -194,11 +194,11 @@ static int adm8211_read_eeprom(struct ieee80211_hw *dev)
                break;
 
        default:
-               if (priv->revid == ADM8211_REV_BA)
+               if (priv->pdev->revision == ADM8211_REV_BA)
                        priv->transceiver_type = ADM8211_RFMD2958_RF3000_CONTROL_POWER;
-               else if (priv->revid == ADM8211_REV_CA)
+               else if (priv->pdev->revision == ADM8211_REV_CA)
                        priv->transceiver_type = ADM8211_AL2210L;
-               else if (priv->revid == ADM8211_REV_AB)
+               else if (priv->pdev->revision == ADM8211_REV_AB)
                        priv->transceiver_type = ADM8211_RFMD2948;
 
                printk(KERN_WARNING "%s (adm8211): Unknown transceiver: %d\n",
@@ -220,7 +220,7 @@ static inline void adm8211_write_sram(struct ieee80211_hw *dev,
        struct adm8211_priv *priv = dev->priv;
 
        ADM8211_CSR_WRITE(WEPCTL, addr | ADM8211_WEPCTL_TABLE_WR |
-                         (priv->revid < ADM8211_REV_BA ?
+                         (priv->pdev->revision < ADM8211_REV_BA ?
                           0 : ADM8211_WEPCTL_SEL_WEPTABLE ));
        ADM8211_CSR_READ(WEPCTL);
        msleep(1);
@@ -238,7 +238,7 @@ static void adm8211_write_sram_bytes(struct ieee80211_hw *dev,
        u32 reg = ADM8211_CSR_READ(WEPCTL);
        unsigned int i;
 
-       if (priv->revid < ADM8211_REV_BA) {
+       if (priv->pdev->revision < ADM8211_REV_BA) {
                for (i = 0; i < len; i += 2) {
                        u16 val = buf[i] | (buf[i + 1] << 8);
                        adm8211_write_sram(dev, addr + i / 2, val);
@@ -421,7 +421,7 @@ static void adm8211_interrupt_rci(struct ieee80211_hw *dev)
                if (skb) {
                        struct ieee80211_rx_status rx_status = {0};
 
-                       if (priv->revid < ADM8211_REV_CA)
+                       if (priv->pdev->revision < ADM8211_REV_CA)
                                rx_status.ssi = rssi;
                        else
                                rx_status.ssi = 100 - rssi;
@@ -703,7 +703,7 @@ static int adm8211_rf_set_channel(struct ieee80211_hw *dev, unsigned int chan)
                adm8211_rf_write_syn_rfmd2958(dev, 0x0A, reg);
                /* set TXRX TX_GAIN */
                adm8211_rf_write_syn_rfmd2958(dev, 0x09, 0x00050 |
-                       (priv->revid < ADM8211_REV_CA ? tx_power : 0));
+                       (priv->pdev->revision < ADM8211_REV_CA ? tx_power : 0));
        } else {
                reg = ADM8211_CSR_READ(PLCPHD);
                reg &= 0xff00ffff;
@@ -722,7 +722,7 @@ static int adm8211_rf_set_channel(struct ieee80211_hw *dev, unsigned int chan)
                                  tx_power<<2);
        adm8211_write_bbp(dev, RF3000_LOW_GAIN_CALIB, lpf_cutoff);
        adm8211_write_bbp(dev, RF3000_HIGH_GAIN_CALIB, lnags_thresh);
-       adm8211_write_bbp(dev, 0x1c, priv->revid == ADM8211_REV_BA ?
+       adm8211_write_bbp(dev, 0x1c, priv->pdev->revision == ADM8211_REV_BA ?
                                     priv->eeprom->cr28 : 0);
        adm8211_write_bbp(dev, 0x1d, priv->eeprom->cr29);
 
@@ -761,7 +761,7 @@ static void adm8211_update_mode(struct ieee80211_hw *dev)
                priv->nar |= ADM8211_NAR_EA | ADM8211_NAR_ST | ADM8211_NAR_SR;
 
                /* don't trust the error bits on rev 0x20 and up in adhoc */
-               if (priv->revid >= ADM8211_REV_BA)
+               if (priv->pdev->revision >= ADM8211_REV_BA)
                        priv->soft_rx_crc = 1;
                break;
        case IEEE80211_IF_TYPE_MNTR:
@@ -862,7 +862,7 @@ static int adm8211_hw_init_bbp(struct ieee80211_hw *dev)
                        break;
                }
 
-               switch (priv->revid) {
+               switch (priv->pdev->revision) {
                case ADM8211_REV_CA:
                        if (priv->transceiver_type == ADM8211_RFMD2958 ||
                            priv->transceiver_type == ADM8211_RFMD2958_RF3000_CONTROL_POWER ||
@@ -920,7 +920,7 @@ static int adm8211_hw_init_bbp(struct ieee80211_hw *dev)
                        adm8211_write_bbp(dev, 0x1c, 0x00);
                        adm8211_write_bbp(dev, 0x1d, 0x80);
                } else {
-                       if (priv->revid == ADM8211_REV_BA)
+                       if (priv->pdev->revision == ADM8211_REV_BA)
                                adm8211_write_bbp(dev, 0x1c, priv->eeprom->cr28);
                        else
                                adm8211_write_bbp(dev, 0x1c, 0x00);
@@ -1052,7 +1052,7 @@ static int adm8211_set_rate(struct ieee80211_hw *dev)
        u8 rate_buf[12] = {0};
 
        /* write supported rates */
-       if (priv->revid != ADM8211_REV_BA) {
+       if (priv->pdev->revision != ADM8211_REV_BA) {
                rate_buf[0] = ARRAY_SIZE(adm8211_rates);
                for (i = 0; i < ARRAY_SIZE(adm8211_rates); i++)
                        rate_buf[i + 1] = (adm8211_rates[i].rate / 5) | 0x80;
@@ -1136,7 +1136,7 @@ static void adm8211_hw_init(struct ieee80211_hw *dev)
         * PWR0PE2  = 13 us
         * PWR1PE2  = 1 us
         * PWR0TXPE = 8 or 6 */
-       if (priv->revid < ADM8211_REV_CA)
+       if (priv->pdev->revision < ADM8211_REV_CA)
                ADM8211_CSR_WRITE(TOFS2, 0x8815cd18);
        else
                ADM8211_CSR_WRITE(TOFS2, 0x8535cd16);
@@ -1165,7 +1165,7 @@ static void adm8211_hw_init(struct ieee80211_hw *dev)
 
        /* SLOT=20 us, SIFS=110 cycles of 22 MHz (5 us),
         * DIFS=50 us, EIFS=100 us */
-       if (priv->revid < ADM8211_REV_CA)
+       if (priv->pdev->revision < ADM8211_REV_CA)
                ADM8211_CSR_WRITE(IFST, (20 << 23) | (110 << 15) |
                                        (50 << 9)  | 100);
        else
@@ -1224,13 +1224,13 @@ static int adm8211_hw_reset(struct ieee80211_hw *dev)
 
        ADM8211_CSR_WRITE(PAR, tmp);
 
-       if (priv->revid == ADM8211_REV_BA &&
+       if (priv->pdev->revision == ADM8211_REV_BA &&
            (priv->transceiver_type == ADM8211_RFMD2958_RF3000_CONTROL_POWER ||
             priv->transceiver_type == ADM8211_RFMD2958)) {
                reg = ADM8211_CSR_READ(CSR_TEST1);
                reg |= (1 << 4) | (1 << 5);
                ADM8211_CSR_WRITE(CSR_TEST1, reg);
-       } else if (priv->revid == ADM8211_REV_CA) {
+       } else if (priv->pdev->revision == ADM8211_REV_CA) {
                reg = ADM8211_CSR_READ(CSR_TEST1);
                reg &= ~((1 << 4) | (1 << 5));
                ADM8211_CSR_WRITE(CSR_TEST1, reg);
@@ -1866,8 +1866,6 @@ static int __devinit adm8211_probe(struct pci_dev *pdev,
                goto err_iounmap;
        }
 
-       pci_read_config_byte(pdev, PCI_CLASS_REVISION, &priv->revid);
-
        *(u32 *)perm_addr = le32_to_cpu((__force __le32)ADM8211_CSR_READ(PAR0));
        *(u16 *)&perm_addr[4] =
                le16_to_cpu((__force __le16)ADM8211_CSR_READ(PAR1) & 0xFFFF);
@@ -1902,7 +1900,7 @@ static int __devinit adm8211_probe(struct pci_dev *pdev,
        priv->mode = IEEE80211_IF_TYPE_MNTR;
 
        /* Power-on issue. EEPROM won't read correctly without */
-       if (priv->revid >= ADM8211_REV_BA) {
+       if (pdev->revision >= ADM8211_REV_BA) {
                ADM8211_CSR_WRITE(FRCTL, 0);
                ADM8211_CSR_READ(FRCTL);
                ADM8211_CSR_WRITE(FRCTL, 1);
@@ -1935,7 +1933,7 @@ static int __devinit adm8211_probe(struct pci_dev *pdev,
 
        printk(KERN_INFO "%s: hwaddr %s, Rev 0x%02x\n",
               wiphy_name(dev->wiphy), print_mac(mac, dev->wiphy->perm_addr),
-              priv->revid);
+              pdev->revision);
 
        return 0;
 
index 5991b17c4a7b7e95d6b8155b42ddb497fccc9369..ef326fed42e4e8f9d7d4397585663b735365882f 100644 (file)
@@ -416,7 +416,7 @@ struct adm8211_desc {
 #define TDES1_CONTROL_RBS1     (0x00000fff)
 
 /* SRAM offsets */
-#define ADM8211_SRAM(x) (priv->revid < ADM8211_REV_BA ? \
+#define ADM8211_SRAM(x) (priv->pdev->revision < ADM8211_REV_BA ? \
         ADM8211_SRAM_A_ ## x : ADM8211_SRAM_B_ ## x)
 
 #define ADM8211_SRAM_INDIV_KEY   0x0000
@@ -623,8 +623,6 @@ struct adm8211_priv {
        struct adm8211_eeprom *eeprom;
        size_t eeprom_len;
 
-       u8 revid;
-
        u32 nar;
 
 #define ADM8211_TYPE_INTERSIL  0x00