}
/*
- * Shrink the file to the given new_size. The new
- * size must be smaller than the current size.
- * This will free up the underlying blocks
- * in the removed range after a call to xfs_itruncate_start()
- * or xfs_atruncate_start().
+ * Shrink the file to the given new_size. The new size must be smaller than
+ * the current size. This will free up the underlying blocks in the removed
+ * range after a call to xfs_itruncate_start() or xfs_atruncate_start().
*
- * The transaction passed to this routine must have made
- * a permanent log reservation of at least XFS_ITRUNCATE_LOG_RES.
- * This routine may commit the given transaction and
- * start new ones, so make sure everything involved in
- * the transaction is tidy before calling here.
- * Some transaction will be returned to the caller to be
- * committed. The incoming transaction must already include
- * the inode, and both inode locks must be held exclusively.
- * The inode must also be "held" within the transaction. On
- * return the inode will be "held" within the returned transaction.
- * This routine does NOT require any disk space to be reserved
- * for it within the transaction.
+ * The transaction passed to this routine must have made a permanent log
+ * reservation of at least XFS_ITRUNCATE_LOG_RES. This routine may commit the
+ * given transaction and start new ones, so make sure everything involved in
+ * the transaction is tidy before calling here. Some transaction will be
+ * returned to the caller to be committed. The incoming transaction must
+ * already include the inode, and both inode locks must be held exclusively.
+ * The inode must also be "held" within the transaction. On return the inode
+ * will be "held" within the returned transaction. This routine does NOT
+ * require any disk space to be reserved for it within the transaction.
*
- * The fork parameter must be either xfs_attr_fork or xfs_data_fork,
- * and it indicates the fork which is to be truncated. For the
- * attribute fork we only support truncation to size 0.
+ * The fork parameter must be either xfs_attr_fork or xfs_data_fork, and it
+ * indicates the fork which is to be truncated. For the attribute fork we only
+ * support truncation to size 0.
*
- * We use the sync parameter to indicate whether or not the first
- * transaction we perform might have to be synchronous. For the attr fork,
- * it needs to be so if the unlink of the inode is not yet known to be
- * permanent in the log. This keeps us from freeing and reusing the
- * blocks of the attribute fork before the unlink of the inode becomes
- * permanent.
+ * We use the sync parameter to indicate whether or not the first transaction
+ * we perform might have to be synchronous. For the attr fork, it needs to be
+ * so if the unlink of the inode is not yet known to be permanent in the log.
+ * This keeps us from freeing and reusing the blocks of the attribute fork
+ * before the unlink of the inode becomes permanent.
*
- * For the data fork, we normally have to run synchronously if we're
- * being called out of the inactive path or we're being called
- * out of the create path where we're truncating an existing file.
- * Either way, the truncate needs to be sync so blocks don't reappear
- * in the file with altered data in case of a crash. wsync filesystems
- * can run the first case async because anything that shrinks the inode
- * has to run sync so by the time we're called here from inactive, the
- * inode size is permanently set to 0.
+ * For the data fork, we normally have to run synchronously if we're being
+ * called out of the inactive path or we're being called out of the create path
+ * where we're truncating an existing file. Either way, the truncate needs to
+ * be sync so blocks don't reappear in the file with altered data in case of a
+ * crash. wsync filesystems can run the first case async because anything that
+ * shrinks the inode has to run sync so by the time we're called here from
+ * inactive, the inode size is permanently set to 0.
*
- * Calls from the truncate path always need to be sync unless we're
- * in a wsync filesystem and the file has already been unlinked.
+ * Calls from the truncate path always need to be sync unless we're in a wsync
+ * filesystem and the file has already been unlinked.
*
- * The caller is responsible for correctly setting the sync parameter.
- * It gets too hard for us to guess here which path we're being called
- * out of just based on inode state.
+ * The caller is responsible for correctly setting the sync parameter. It gets
+ * too hard for us to guess here which path we're being called out of just
+ * based on inode state.
+ *
+ * If we get an error, we must return with the inode locked and linked into the
+ * current transaction. This keeps things simple for the higher level code,
+ * because it always knows that the inode is locked and held in the transaction
+ * that returns to it whether errors occur or not. We don't mark the inode
+ * dirty on error so that transactions can be easily aborted if possible.
*/
int
xfs_itruncate_finish(
*/
error = xfs_bmap_finish(tp, &free_list, &committed);
ntp = *tp;
+ if (committed) {
+ /* link the inode into the next xact in the chain */
+ xfs_trans_ijoin(ntp, ip,
+ XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
+ xfs_trans_ihold(ntp, ip);
+ }
+
if (error) {
/*
- * If the bmap finish call encounters an error,
- * return to the caller where the transaction
- * can be properly aborted. We just need to
- * make sure we're not holding any resources
- * that we were not when we came in.
+ * If the bmap finish call encounters an error, return
+ * to the caller where the transaction can be properly
+ * aborted. We just need to make sure we're not
+ * holding any resources that we were not when we came
+ * in.
*
- * Aborting from this point might lose some
- * blocks in the file system, but oh well.
+ * Aborting from this point might lose some blocks in
+ * the file system, but oh well.
*/
xfs_bmap_cancel(&free_list);
- if (committed)
- goto error_join;
return error;
}
if (committed) {
/*
- * The first xact was committed, so add the inode to
- * the new one. Mark it dirty so it will be logged and
+ * Mark the inode dirty so it will be logged and
* moved forward in the log as part of every commit.
*/
- xfs_trans_ijoin(ntp, ip,
- XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
- xfs_trans_ihold(ntp, ip);
xfs_trans_log_inode(ntp, ip, XFS_ILOG_CORE);
}
+
ntp = xfs_trans_dup(ntp);
error = xfs_trans_commit(*tp, 0);
*tp = ntp;
- if (error)
- goto error_join;
- error = xfs_trans_reserve(ntp, 0, XFS_ITRUNCATE_LOG_RES(mp), 0,
- XFS_TRANS_PERM_LOG_RES,
- XFS_ITRUNCATE_LOG_COUNT);
- if (error)
- goto error_join;
+ /* link the inode into the next transaction in the chain */
+ xfs_trans_ijoin(ntp, ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
+ xfs_trans_ihold(ntp, ip);
+
+ if (!error)
+ error = xfs_trans_reserve(ntp, 0,
+ XFS_ITRUNCATE_LOG_RES(mp), 0,
+ XFS_TRANS_PERM_LOG_RES,
+ XFS_ITRUNCATE_LOG_COUNT);
+ if (error)
+ return error;
}
/*
* Only update the size in the case of the data fork, but
(ip->i_d.di_nextents == 0));
xfs_itrunc_trace(XFS_ITRUNC_FINISH2, ip, 0, new_size, 0, 0);
return 0;
-
-error_join:
- /*
- * Add the inode being truncated to the next chained transaction. This
- * keeps things simple for the higher level code, because it always
- * knows that the inode is locked and held in the transaction that
- * returns to it whether errors occur or not. We don't mark the inode
- * dirty so that this transaction can be easily aborted if possible.
- */
- xfs_trans_ijoin(ntp, ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
- xfs_trans_ihold(ntp, ip);
- return error;
}
projects / linux-2.6-omap-h63xx.git / commitdiff