]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
igb: do not use phy ops in ethtool test cleanup for non-copper parts
authorAlexander Duyck <alexander.h.duyck@intel.com>
Sat, 22 Nov 2008 05:30:24 +0000 (21:30 -0800)
committerDavid S. Miller <davem@davemloft.net>
Sat, 22 Nov 2008 05:30:24 +0000 (21:30 -0800)
Currently the igb driver is experiencing a panic due to a null function
pointer being used during the cleanup of the ethtool looback test on
fiber/serdes parts.  This patch prevents that and adds a check prior to
calling any phy function.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/igb/igb.h
drivers/net/igb/igb_ethtool.c
drivers/net/igb/igb_main.c

index acf2569b98f46fbed549b47e14110a2a081dd9da..2121b8bc6ea7b4c3532e72330b7bc88f67336207 100644 (file)
@@ -332,4 +332,36 @@ extern void igb_free_rx_resources(struct igb_ring *);
 extern void igb_update_stats(struct igb_adapter *);
 extern void igb_set_ethtool_ops(struct net_device *);
 
+static inline s32 igb_reset_phy(struct e1000_hw *hw)
+{
+       if (hw->phy.ops.reset_phy)
+               return hw->phy.ops.reset_phy(hw);
+
+       return 0;
+}
+
+static inline s32 igb_read_phy_reg(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+       if (hw->phy.ops.read_phy_reg)
+               return hw->phy.ops.read_phy_reg(hw, offset, data);
+
+       return 0;
+}
+
+static inline s32 igb_write_phy_reg(struct e1000_hw *hw, u32 offset, u16 data)
+{
+       if (hw->phy.ops.write_phy_reg)
+               return hw->phy.ops.write_phy_reg(hw, offset, data);
+
+       return 0;
+}
+
+static inline s32 igb_get_phy_info(struct e1000_hw *hw)
+{
+       if (hw->phy.ops.get_phy_info)
+               return hw->phy.ops.get_phy_info(hw);
+
+       return 0;
+}
+
 #endif /* _IGB_H_ */
index a661159a097bd2634793fa9a889496505577b29b..8e9d295034ffa694129b2c8baf25632fb03baa8b 100644 (file)
@@ -1376,10 +1376,10 @@ static void igb_phy_disable_receiver(struct igb_adapter *adapter)
        struct e1000_hw *hw = &adapter->hw;
 
        /* Write out to PHY registers 29 and 30 to disable the Receiver. */
-       hw->phy.ops.write_phy_reg(hw, 29, 0x001F);
-       hw->phy.ops.write_phy_reg(hw, 30, 0x8FFC);
-       hw->phy.ops.write_phy_reg(hw, 29, 0x001A);
-       hw->phy.ops.write_phy_reg(hw, 30, 0x8FF0);
+       igb_write_phy_reg(hw, 29, 0x001F);
+       igb_write_phy_reg(hw, 30, 0x8FFC);
+       igb_write_phy_reg(hw, 29, 0x001A);
+       igb_write_phy_reg(hw, 30, 0x8FF0);
 }
 
 static int igb_integrated_phy_loopback(struct igb_adapter *adapter)
@@ -1392,17 +1392,17 @@ static int igb_integrated_phy_loopback(struct igb_adapter *adapter)
 
        if (hw->phy.type == e1000_phy_m88) {
                /* Auto-MDI/MDIX Off */
-               hw->phy.ops.write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, 0x0808);
+               igb_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, 0x0808);
                /* reset to update Auto-MDI/MDIX */
-               hw->phy.ops.write_phy_reg(hw, PHY_CONTROL, 0x9140);
+               igb_write_phy_reg(hw, PHY_CONTROL, 0x9140);
                /* autoneg off */
-               hw->phy.ops.write_phy_reg(hw, PHY_CONTROL, 0x8140);
+               igb_write_phy_reg(hw, PHY_CONTROL, 0x8140);
        }
 
        ctrl_reg = rd32(E1000_CTRL);
 
        /* force 1000, set loopback */
-       hw->phy.ops.write_phy_reg(hw, PHY_CONTROL, 0x4140);
+       igb_write_phy_reg(hw, PHY_CONTROL, 0x4140);
 
        /* Now set up the MAC to the same speed/duplex as the PHY. */
        ctrl_reg = rd32(E1000_CTRL);
@@ -1496,10 +1496,10 @@ static void igb_loopback_cleanup(struct igb_adapter *adapter)
        wr32(E1000_RCTL, rctl);
 
        hw->mac.autoneg = true;
-       hw->phy.ops.read_phy_reg(hw, PHY_CONTROL, &phy_reg);
+       igb_read_phy_reg(hw, PHY_CONTROL, &phy_reg);
        if (phy_reg & MII_CR_LOOPBACK) {
                phy_reg &= ~MII_CR_LOOPBACK;
-               hw->phy.ops.write_phy_reg(hw, PHY_CONTROL, phy_reg);
+               igb_write_phy_reg(hw, PHY_CONTROL, phy_reg);
                igb_phy_sw_reset(hw);
        }
 }
index eca5684d56555bae5ff865da15bcd0057eb3c02e..b64c41a44dfc30b96160feb40a130dbce36dfd37 100644 (file)
@@ -931,8 +931,7 @@ void igb_reset(struct igb_adapter *adapter)
        wr32(E1000_VET, ETHERNET_IEEE_VLAN_TYPE);
 
        igb_reset_adaptive(&adapter->hw);
-       if (adapter->hw.phy.ops.get_phy_info)
-               adapter->hw.phy.ops.get_phy_info(&adapter->hw);
+       igb_get_phy_info(&adapter->hw);
 }
 
 /**
@@ -1305,7 +1304,7 @@ err_register:
        igb_release_hw_control(adapter);
 err_eeprom:
        if (!igb_check_reset_block(hw))
-               hw->phy.ops.reset_phy(hw);
+               igb_reset_phy(hw);
 
        if (hw->flash_address)
                iounmap(hw->flash_address);
@@ -1365,9 +1364,8 @@ static void __devexit igb_remove(struct pci_dev *pdev)
 
        unregister_netdev(netdev);
 
-       if (adapter->hw.phy.ops.reset_phy &&
-           !igb_check_reset_block(&adapter->hw))
-               adapter->hw.phy.ops.reset_phy(&adapter->hw);
+       if (!igb_check_reset_block(&adapter->hw))
+               igb_reset_phy(&adapter->hw);
 
        igb_remove_device(&adapter->hw);
        igb_reset_interrupt_capability(adapter);
@@ -2283,8 +2281,7 @@ static void igb_set_multi(struct net_device *netdev)
 static void igb_update_phy_info(unsigned long data)
 {
        struct igb_adapter *adapter = (struct igb_adapter *) data;
-       if (adapter->hw.phy.ops.get_phy_info)
-               adapter->hw.phy.ops.get_phy_info(&adapter->hw);
+       igb_get_phy_info(&adapter->hw);
 }
 
 /**
@@ -3258,7 +3255,7 @@ void igb_update_stats(struct igb_adapter *adapter)
        /* Phy Stats */
        if (hw->phy.media_type == e1000_media_type_copper) {
                if ((adapter->link_speed == SPEED_1000) &&
-                  (!hw->phy.ops.read_phy_reg(hw, PHY_1000T_STATUS,
+                  (!igb_read_phy_reg(hw, PHY_1000T_STATUS,
                                              &phy_tmp))) {
                        phy_tmp &= PHY_IDLE_ERROR_COUNT_MASK;
                        adapter->phy_stats.idle_errors += phy_tmp;
@@ -4111,9 +4108,8 @@ static int igb_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
        case SIOCGMIIREG:
                if (!capable(CAP_NET_ADMIN))
                        return -EPERM;
-               if (adapter->hw.phy.ops.read_phy_reg(&adapter->hw,
-                                                    data->reg_num
-                                                    & 0x1F, &data->val_out))
+               if (igb_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
+                                    &data->val_out))
                        return -EIO;
                break;
        case SIOCSMIIREG: